AbodeFit Zen Ultimate Far User manual

Zen Ultimate Far Infrared
Sauna 6 Person
USER MANUAL

Congratulations on your purchase of the AbodeFit Health™
Zen Ultimate Far Infrared Sauna.
Please read the user manual carefully before using,
pay special attention to the safety precautions and keep
for future reference.
WARNING
Keep young children away from this Zen Ultimate Far Infrared Sauna at all times.
Please contact AbodeFit Health’s warranty provider,
Vitality 4 Life, (details on back page) if any malfunction
occurs and a qualified technician will assist you.
Unauthorised dismantling of the Zen Ultimate Far
Infrared Sauna will void warranty.

Safety Precautions 4
Parts and Features 6
Installing your Zen Ultimate Far Infrared Sauna 7
Operating your Zen Ultimate Far Infrared Sauna 11
Cleaning and Maintenance 12
Troubleshooting 13
Warranty 14
EN
3

EN
4
Safety Precautions
• The Zen Ultimate Far Infrared Sauna is designed to be stand-alone or built-in to your
bathroom, pool area or spa.
• It is recommended to install the Zen Ultimate Far Infrared Sauna indoors for
maximum protection and longevity.
• If installed outside, whether it’s on a deck, veranda or in a purpose-built Cabana, it
must always be completely covered and protected from the rain, moisture and other
elements in order to protect the naturally untreated Canadian Hemlock finish.
• Supervise children at all times. Children over the age of 6 years may use the sauna
under the supervision of adults.
• Do not use the Zen Ultimate Far Infrared Sauna if you have an open wound, eye
disease or severe sunburn.
• Elderly, pregnant woman and infants should not use the sauna.
• Exit the sauna immediately if you feel uncomfortable, dizzy or sleepy.
• Persons with health conditions or suffering from a disease directly related to temperature
should consult their doctor before using the Zen Ultimate Far Infrared Sauna.
• CAUTION: Hyperthermia can occur when the internal temperature of your body
reaches a level several degrees above normal body temperature of 37ºC (98.6°F).
• The symptoms of hyperthermia include an increase in the internal temperature of
the body, dizziness, lethargy, drowsiness, and fainting.
• The effects of hyperthermia include failure to perceive heat and to recognize the
need to exit the room, unawareness of impending hazard, fatal damage to pregnant
women, physical inability to exit the room and unconsciousness.
• Do not use the sauna if you are under the effects of alcohol.
• WARNING: The use of alcohol, drugs, or medication is capable of greatly increasing
the risk of fatal hyperthermia.
• Remove all jewellery before you enter the sauna.
• The door of the sauna does not include a locking or latching system which could
cause entrapment inside the sauna.
• To avoid fire, do not dry clothes or leave any towels in the sauna.
• While in the sauna, do not touch the light bulb. If the bulb needs to be changed,
switch it off and wait until the sauna is shut off and the bulb is cool.
• Do not spray water on the far-infrared heating elements. This activity may result in
electric shock or damage to the heating elements
• Do not place pets in the sauna.

EN
5
Installation Requirements:
• Before connecting the sauna to a power source, please ensure all the wires, cords
and connections are connected properly.
• Plug the Zen Ultimate Far Infrared Sauna into a proper wall power outlet. Do not
share the same outlet with any other appliances.
• Install the Zen Ultimate Far Infrared Sauna on a completely level surface.
• Ensure the control system is in a well ventilated dry area. Do not place it next to any
heat source, in direct sunlight, where there is any type of vibration or in any damp or
dusty environment. It should not be placed in an area with other thermal radiating
objects.
• WARNING: To reduce the risk of electrocution and burns, do not operate unless
heater guard is correctly in place.
• CAUTION: Do not place combustible materials on or against heaters at any time.
• To reduce risk of electric shock and/or fire, do not expose the control system to
direct water contact or rain. Do not open the cover to the control system as there are
high tension fittings that can be dangerous. Only authorised and approved dealer
technicians should make any needed or necessary repairs.
• Any unauthorised repairs, alterations or modificaions can lead to serious injuries, can
cause the sauna to operate outside its intended specifications parameters and will
void the warranty
• WARNING: Reduce the risk of electrocution by disconnecting the power supply
before servicing.
• Do not spray the exterior with water. If the area you are installing the sauna has
a tendency for dampness, place rubber matting or some other suitable barrier
underneath the sauna.
• Do not store flammable objects or chemical substances near the sauna.
• Drink a cup of water before the sauna session. After two hours of continuous use,
shut the sauna down for one hour.
• If the sauna becomes too warm, open the vent in the ceiling or open the front door.
• After your sauna session, turn off, and unplug the power cord.
TRANSPORTATION AND STORAGE
• Avoid exposure to rain, snow or strong collisions during transport.
• Do not store in damp environments.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
EN
6
Parts and Features
1. Dust cover
2. Star roof lighting (24)
3. Top board
4. Left board
5. Far infrared panel
heater
6. Ventilation
7. Metal door bracket
8. Door handle
9. Side glass
10.Glass door
11.Front board
12.Control box
13.Central LED spotlight
14.LED strip lighting
15.Top frame
16.Back board
17.Control panel
18.Ceramic tube heater
19.Backrest
20.Right board
21.Second layer bench
22.Speaker
23.Second layer bench
support
24.Bench
25.Side bench support
26.Bench support
27.Floor board

EN
7
Zen Ultimate Far Infrared Sauna 6 Person
comes in 6 cartons. Make sure all parts are
included before commencing assembly.
1. Assembling Front Frame. Make a
square on the floor with the four front
frame pieces. Connect and join each
corner using a hammer to ensure its
slotted in fully. Next secure in each
corner with screws using a screw driver.
Move this piece aside for the moment.
2. Assembling Left and Back Boards.
Position the left board in the desired
location of your sauna. Align the
corresponding battens of the bottom
section of the back board with the left
board and secure together with screws
using an electric screwdriver.
Now slide the top portion of the back
board into place and secure with screws
using an electric screwdriver.
3. Assembling Right Board. Align the
corresponding battens of the back and
right board, make sure the protruding
batten aligns to the flute, and secure
together with screws using an electric
screwdriver. Slot the second sections
into place on left and right boards and
secure with screwdriver.
4. Assembling bench supports and
benches. Unscrew the far-infrared
panel heater on the left board and slide
the second layer support into place
between the left and right boards (in
the slot closest to the back). Slide the
bench into place beneath the second
layer support. Next, slide the second
layer bench in place above the second
Installing your Zen Ultimate Far Infrared Sauna

EN
8
layer support. Lastly, slide the bench
support underneath the bench.
5. Positioning Floor Board. Slide the
floor board into place, in front of the
bench support.
6. Assembling Front Board. Make sure
protruding batten at left and right side of
front board align to the flute on left and
right board, then fix tightly with screws.
7. Assembling the Side Bench. Slot the
side bench support into place, at front
right of sauna. Tightly screw the side
bench seat strut in place. Place the
bench seat on top of strut. Feed power
cord through the back of the second
layer bench support.
8. Assembling the Top Frame, Top Board
and Dust Cover. There are 2 pieces for
the top frame. First slide the left piece
into position and then the right.
Feed red electrical cord for the LED
strip lighting through the hole in the
left rear corner of the top frame.
Connect electrical plugs for the star
and spot lights.

EN
9
Next feed the LED strip light cord along
the inner groove on all 4 sides of the
top frame.
Insert the top board in the top frame
and secure tightly with screws.
Lastly, slide the
dust cover (2
sections) over
the top board,
ensuring
power cords
are threaded
through and fix
tightly with screws.
9. Assembling Front Doors. Unscrew
and remove door runner block pieces
in top and bottom of door frame.
Slide right side glass into door runner.
Slide left side glass into door runner.
Reattach door runner block pieces in
top and bottom of frame and fix tightly
with screws.
Position one metal
door bracket on the
outside of the right
side glass, the other
metal bracket on the
inside then secure with
screws using an allen key.
Next carefully position the centre glass
door in place and attach to the right
glass panel in the top then bottom
position with a metal plate using screws
Take the rubber door
protection strip and
secure into left glass door
panel pushing against
the strip with your hand.
Lastly for door closure, take the metal
door closure bracket and secure to the
top of
the left side
glass and
insert metal
clip on the
glass door.

EN
10
10.Assembling the door handles.
Position metal door handle on outside
of glass door. Insert a washer and hold
in place while you position one of the
wooden door handles with another
washer on the inside of the door in the
top handle position.
Turn the wooden handle
clockwise to secure to
the metal external
door handle. Repeat
this step with the top
wooden handle to secure
to the metal handle and glass door.
Check the screws are tight and the
handles are secured well.
11 Attach backrest panels. Starting from
the left board, slot on the back rest panel
Left(1) first then moving from left to right
slot on all the back rest panels to the
left , centre and right boards, above the
second layer bench and secure tightly
with screws.
This completes the installation process.

Display Screen
1. Display Screen – For temperature, time, FM
2. Power ON/OFF – When the power is turned on at the wall outlet, the sauna will beep
twice to indicate power is reaching the sauna. Press Power ON/OFF button on the
control panel to activate the sauna. Temperature display screen displays current
temperature. Timer display screen displays the set time of last sauna session. If
current temperature is lower than the temperature you have selected, the heating
function will start to work. Press the “ON/OFF” button again to turn the sauna off. All
heating will stop.
3. Light – Press the Light button to turn on/off the light inside of sauna and to change
the colour of the light.
4. Music Mode – Press this button to adjust bluetooth, MP3 and FM from 85.7-108.
5. USB Function – Press this button to start USB function
6. Music Selection – Press the forward and back track keys at the same time for 2
seconds to activate FM mode. Press back track button for last track and forward
track key buton to move to the next track.
7. Temperature Control - Press the Temperature ‘+’and ‘-‘ button to adjust the
temperature. Adjustment range is 25°C-65°C. When the “Heat” indicator lamp is on,
each time the “+” button is pressed, temperature will increase one degree. If pressed
for three seconds, the temperature setting will increase quickly. Each time the “-”
button is pressed, temperature will decrease by one degree. If pressed for three
seconds, the temperature setting will decrease quickly. After the sauna reaches
the desired temperature, the Heat Indicator Light will turn Off. Set the temperature
and time to a comfortable level, normally, 60 minutes at 50°C-65°C. If ambient
Operating your Zen Ultimate Far Infrared Sauna
9
2
3
4
5
1
8
7
106
EN
11

EN
12
temperature is lower than 18.3°C, please set the temperature at about 50°C;
and if ambient temperature is higher than 18.3°C, please set the temperature at
about 65°C.
8. Time control – Touch the ‘+’ and ‘-’ buttons to set the timer from 5 to 90 minutes.
If pressed for three seconds, the timer will increase quickly. To extend the sauna
session, reset the timer again.
9. Pause/Play – When music playing in this mode, this key is for pause/play.
10.Volume control – Press ‘+’ and ‘-’ to increase or decrease volume.
NOTE: The Fahrenheit and Celcius display can be switched by pressing the temperature
button “+” and “-” at the same time, then pressing the ‘Light” button to switch between
Fahrenheit and Celcius.
Cleaning and Maintenance
• Do not use liquid or aerosol cleansers inside the sauna.
• Unplug the sauna from the power outlet on the wall before cleaning. Use plain
water and a soft cloth for cleaning. Do no use benzene, alcohol or strong cleaning
chemicals on the sauna. Dry with a clean dry towel.
• If you are transporting the sauna, avoid exposure to rain, snow or strong collisions
during transport.
• Do not store the sauna in damp environments.
• Do not leave the sauna on for more than 2 hours at a time.
NOTE: Use of chemicals will damage the wood and any natural protection layer inherent
in the wood.

EN
13
Troubleshooting
Power Indicator
Light is not
working
The connectors are not
connected properly
No power supply input
The Power Indicator Light
is faulty
Check the connections
Check the power outlet on the
wall, the power plug is connected
properly & the power switch is on
Contact our Customer Service
Centre, details on the last page
Heat Indicator
Light is not
working
The Heat Indicator Light or
circuit board is faulty
The temperature sensor is
faulty
Contact our Customer Service
Centre, details on the last page
Contact our Customer Service
Centre, details on the last page
The carbon
far-infrared
heaters are not
heating up
The carbon far-infrared
heaters are faulty
The wire junction or the
heater’s wire is loose
The temperature sensor is
faulty
The circuit board is
damaged
Contact our Customer Service
Centre, details on the last page
Check and tighten connection
Contact our Customer Service
Centre, details on the last page
Contact our Customer Service
Centre, details on the last page
Light bulb is not
working
The light bulb has burnt out
Light bulb wiring is loose
The electrical control panel
is faulty
Replace the light bulb
Tighten light bulb connectors
Contact our Customer Service
Centre, details on the last page
Sauna does not
power up when
you press the
Power On Button
Power cord is unplugged
Power outlet has no power
Power supply or circuit
panel is faulty
Connect power plug correctly
Check power outlet
Contact our Customer Service
Centre, details on the last page
The Temperature
Display Screen
shows “EP”
The temperature sensor
connector is loose or the
sensor is faulty
Tighten the temperature sensor
connector or contact our
Customer Service Centre, details
on the last page
The Temperature
Display Screen
shows “H”
The temperature inside the
sauna is too high
Turn off sauna and please contact
our Customer Service Centre,
details on the last page
LED Lighting is
not working
LED’s have burnt out
Light wiring is loose
LED lighting holder is broken
The electrical control panel
is faulty
Replace the LED light
Tighten light connectors
Replace the LED lighting holder
Contact our Customer Service
Centre, details on the last page

EN
14
ABODEFIT HEALTH™ ZEN ULTIMATE FAR INFRARED SAUNA WARRANTY
Warranty Period: Lifetime Carbon Heaters, 5 Year Repair General. Vitality 4 Life are the warranty providers
for AbodeFit Health™ products. Vitality 4 Life warrant this product to be free from defects in materials and
workmanship while in normal domestic use for a period of five years on parts and labour from the
original date of purchase.
DO NOT RETURN THE PRODUCT TO THE STORE.
LODGING A WARRANTY CLAIM
Should you experience any issues with your product, please follow
these steps to lodge a warranty claim:
1. Contact your local Vitality 4 Life Service Centre with the
following details: Your warranty details including name, email
and phone number
– Product name and model number
– Product serial number, found on the rating label of the
product
– Explanation of how the damage occurred
– Photos of the damage or issue is highly beneficial to
expediting your claim
2. Vitality 4 Life will assess your claim and respond within 24-48
hours. If the Product exhibits a defect while in normal domestic
use, within the warranty period; we will, at our option, either
repair or replace the product or defective part free of charge.
3. In the event the product is required to be sent to the Service
Centre, the customer is liable for all packing, freight and
insurance costs for transit of the product to Vitality 4 Life.
Subject to the applicable consumer laws in your jurisdiction.
4. If the product, or one of its parts, qualifies for replacement or
service within the 30-Day period after date of purchase, Vitality
4 Life will arrange the shipping at no cost to you.
5. Any product sent to a Vitality 4 Life Service Centre must include
a Return Authorization Form. Failure to include this form may
result in the product being rejected from our warehouse or a
delayed service time.
6. In the event that the warranty period for a product has
expired, or if a Product does not qualify for warranty service,
repair or replacement, consumers may still buy replacement
parts or have products repaired by one of Vitality 4 Life’s
Service Centres. Please contact Vitality 4 Life for further
information. Vitality 4 Life will contact you with a quote prior to
undertakingany service work outside of the warranty coverage.
7. Typical turn-around times to address warranty claims can be
between 10-14 business days, plus shipping, depending on
location and type of damage or warranty claim.
8. In no event shall our liability exceed the retail value of the
product. We make no warranty with respect to parts, from
asource other than Vitality 4 Life.
9. In the event that warranty parts or products are provided, the
customer must cover the related shipping costs to receive
goods.
10.All exchanged or substitute parts and products replaced
under warranty service will become the property of Vitality
4 Life. Repaired or replaced products or parts thereof will
be warranted by Vitality 4 Life for the balance of the original
warranty period.
11.(Australia only) Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
WARRANTY DOES NOT COVER
1. Damage, accidental or otherwise, to the Product, not caused by
direct defect in factory workmanship or materials.
2. Damage due to abuse, mishandling, alteration, misuse,
commercial service, tampering, accident, failure to follow care,
operating and handling provisions indicated in the instructions.
3. Damage caused by parts or service not authorized or
performed by Vitality 4 Life.
4. ‘Normal’ wear and tear that naturally and inevitably occurs as a
result of normal use or aging.
5. Some states do not allow the exclusion or limitation of
incidental or consequential damages. Therefore, the above
limitations may not apply to you in the case of damage
in shipment. If your product was damaged in shipment:
Immediately report this type of damage to the parcel carrier
and have them file an inspection report to contact the
distributor from whom you purchased the product for further
instructions.
6. You have rights and benefits under the consumer laws in
your jurisdiction. Without detracting from these rights or
benefits, Vitality 4 Life excludes all liability in respect of this
product for any other loss which is not reasonably foreseeable
from a failure of this product, which may include liability for
negligence, loss of expenditure associated with the product and
loss of enjoyment.

EN
15

EN
16
Support & Service Centres
Contact your local distributor for warranty & service
Vitality 4 Life – Australia & New Zealand
E: [email protected]
W: www.vitality4life.com.au
Vitality 4 Life – United Kingdom
E: [email protected].uk
W: www.vitality4life.co.uk
Vitality 4 Life - United States
E: [email protected]
W: www.vitality4life.com
Vitality 4 Life – France
E: [e-mail]
W: www.vitality4life.fr
Vitality 4 Life – Deutschland
E: [email protected]
W: www.vitality4life.de
Vitality 4 Life – Italia
E: [e-mail]
W: www.vitality4life.it
Vitality 4 Life – España
E: [e-mail]
W: www.vitality4life.es
Vitality 4 Life – Netherlands
E: [e-mail]
W: www.vitality4life.co.nl