ABODOST IT01 pro User manual

4K UHD Dash Camera
Instruction Manual

ABODOST-IT01 pro
USER MANUAL
BUILT-IN WIFI NIGHT VISION LOOP CYCLE ULTRA HD VOICE CONTROL PARKING MODE

STOP
Item NOT as described?
Missing items?
Damaged or defective？
Any issues what so ever？
EXPERIENCING
PROBLEMS?
contact us before returning the item
WE WILL HELP YOU RESOLVE ANY ISSUES ASAP
CUSTOMER SERVICE
HOURS:7*24 hours by amazon or
after-sale mailbox:[e-mail]

Introduction
32
INDEX
Safety Information
Getting Started
Product Overview
Standard package contents
Installation 9
Buttons and Functions
Video Menu Setting
Photo Menu Setting
Playback video & photo menu Setting
App Introduction
Specifications
F A Q ’s
GPS Player Software
2
4
6
7
8
13
19
20
21
28
29
1
31

Introduction
Thank you for purchasing our product, We hope that this
user manual helps you get started with basic features that
our camera has to offer. This camera is equipped with
Ultra HD 3840@30FPS with Hisilicon3559 + Sony Starvis
IMX335 Sensor for excellent low light sensitivity and high
dynamic range which allows you to record continuous
high-quality video playbacks and brings phenomenal 4K
Ultra-HD resolution videos even at night without the need
for infrared sensors.
It has the newest technology for external GPS &WIFI
upgraded to reduce the interference to satellite signals, so
that you can drive around without worry, and accurately
help you record every location.It has superior night vision
technology which captures superb video under all
low-light conditions,WDR, G-Sensor, Emergency Video
lock button, Audio recording, Loop cycle recording,
Parking Monitor, HUD, Auto-Record, Auto-Power Off and is
very easy to use. This user manual is subject to change
without prior notice.
1

Safety Information
Please read this manual very carefully before using the
camera or installation and keep it safe for future refer-
ence. It will be helpful if you haveany questions or
encounter any operational problems.
WARNMINGS
!
Failure to comply with safety warnings and regulations
can result in serious injury or death.
Please read and understand all instructions before using
this product If any damage is caused by failure to follow
the instructions, the warranty will be voided.
1.Please read this instruction manual carefully before
using the camera. It contains important information for
your safety as well as operating and maintenance instruc-
tions.
2.Follow all safety precautions in order to prevent
damage due to improper use of the camera.
3.In the event of improper use or erroneous handling, no
liability can be assumed for any possible damage which
may occur.
2
POWER

WARNMINGS
!
4.You should not install this dash camera at a place that
would obstruct or reduce a driver’s view. Make sure your
usage complies with pertinent vehicle codes of your state,
province, territory or country.
5.You should post the required notices of recordation to
occupants inside the vehicle, if voices or other informa-
tion/signal pertaining to in-vehicle activities will be
recorded.driver’s view. Make sure your usage complies
with pertinent vehicle codes of your state, province,
territory or country.
6.You should avoid extended exposure of the dash cam to
direct sunlight or extreme temperatures (either high or
low temperature) which tend to degrade or damage the
unit and its normal functionality.
7.You should examine, check and verify the dash cam at
least every 6 months, including the memory card, to
ensure the video reception and recording are working
properly. For each use, you should verify that the dash
cam unit, the visible lights and the audible sounds are
working normally.
8.Do not try to open the cover or try to repair it yourself. If
the accessories for this device have any problem, please
contact the seller for assistance.
3
POWER
9.Pay careful attention when cleaning the lens surface.
Use a soft, moist cloth to clean

WARNMINGS
!
the lens to avoid compromising video quality.
10.You should use the dash cam unit in the way it is
intended. You should not use the dash cam unit in a way
that would be illegal or that tends to physically damage
the unit, or tend to cause danger to the safe operation of
the vehicle or the occupants.
11.This device is intended to be used inside the vehicle
only.
12.Do not expose this product to rain, moisture or water
under any circumstances or it will result in external or
internal damage.
14.If any damage is caused by failure to follow the instruc-
tions, the warranty will be voided.
4
Getting Started
Before installation, please check the accessories carefully
to ensure that the product and accessories are correct
and complete.
During installation, be sure not to insert the car key into
the power supply, and do not insert or remove any
machine accessories like microSD card or rear camera
when the dash cam is powered on. These actions should
13.Do not operate or install the camera while driving, or
attempt to change any setting etc.

5
be completed when power is turned off.
When the car key is plugged into the vehicle, the dash
cam will automatically turn on. Please check whether the
function of power on/off, the front and rear cameras
display is normal.
If you need to download the recording videos and images,
please turn off the camera first before removing the
microSD card.
You must use U3 high-speed card (recommended capacity
16GB-256GB), lower than U3 will cause problems like
video stutter, black screen, and video cannot be recorded
or cannot be played.
Do not remove the Micro-SD card while it is saving or
reading data.
Make sure to remove the plastic screen protector on the
lens and on the screen before recording videos. Other-
wise your videos will look blurry and out of focus.

Product Overview
!
6
Loudspeaker Reset buttonMIC
USB Power
LCD
Suction hoIder
AV-IN

2.Follow all safety precautions in order to prevent
damage due to improper use of the camera.
3.In the event of improper use or erroneous handling, no
liability can be assumed for any possible damage which
may occur.
!
7
Standard package contents
1x 4K Front Dash Cam
1x Suction Mount
1x GPS part & 1x Short "Y"USB Cable
1x 11ft Car charger
1x 22ft Cable for Rear Camera with Screws
1x Adhesive and 2x Screw
4x Cable Clips
1x Crowbar Tool
1x User manual
TF card
Up button
Menu button
Down button
Camera
OK button
Mode Swith button
Emergercy Lock button
Power button

Buttons and Functions
!
8
UP BUTT
ON
MENU
BUTTON
Press Once to enter video menu setting
from video mode
Press Once to Switch between front/rear
camera when video mode
Press and Hold to wifi O n/Off
Press Once to go to previous selection under
setting mode
Press Once to enter Photo menu setting
from Photo mode video mode
Press Once to return menu page from
detailed setting mode
DOWN
BUTTON
Press and Hold to Asr On/Off
Press Once to go to next selection under
setting mode
OK
BUTTON
Press Once to confirm the selection under
setting mode
Press Once to start/stop recording under
video recording mode
Press Once to take Photo under Photo mode
POWER
BUTTON
Press and Hold to power On/Off
Press Once to turn On/Off the display

滚滚长江东逝水
!
9
EMERG
ERCY LO
CK
BUTTON
MODE S
WITCH
BUTTON
OK
BUTTON
Press Once to confirm the selection under
setting mode
Press Once to start/stop recording under
video recording mode
Press Once to take Photo under Photo mode
POWER
BUTTON
Press and Hold to power On/Off
Press Once to turn On/Off the display
In the video mode, emergency video is
locked, after pressing the key, the red
flashing of video will turn to the yellow
flashing of locked video
Press Once to confirm the selection under
setting mode
Press Once OK BUTTON to stop recording
under video recording mode and then Press
Once MODE SWITCH BUTTON to enter Photo
mode
Press Once to enter the playback video &
photo menu under photo mode
Installations
Insert the microSD card into the dash
cam. Max support 256GB.
Please make sure the camera is turned
OFF First. Then align the gold plated
contacts facing towards the back of the
camera (Screen Side).
Then insert the memory card half way
in. Then use the finger nail or a paper
clip to push the card all the way inward until it clicks and
locks in place.

滚滚长江东逝水
!
10
Installations
The camera comes with the default settings which allows
you to start using your camera right out of the box without
changing any settings. Please make sure to format the
memory card before first time use.
1.Clean the spot on your windshield where you would like
to mount the camera and confirm the placement. We
recommend to install the dash cam near the rear view
mirror of driver opposite side.
2.1x GPS part & 1x Short "Y" USB Cable, Short "Y" USB
Cable has two ports, one end is connected to GPS, the
other end is connected to Car charger, GPS can be
installed on the windshield, as shown in the figure

!
11
Installations
3.Next, align the position to be placed and turn the spin
button to suck the suction tightly. The suction position
can be changed at any time based in vacuum pressure
according to your needs.
4.Install the rear camera on the rear windshield using the
adhesive tape or near the license plate using screws.
5.Clean the spot on your windshield where you would like
to mount the camera and confirm the placement. We
recommend to install the dash cam near the rear view
mirror of driver opposite side.
Rear camera is designed to record footage at the rear of the vehicle.
It should not be used as aid in backing up.

!
12
Installations
6.Next, align the position to be placed and turn the spin
button to suck the suction tightly. The suction position
can be changed at any time according to your needs by
the principle of air pressure.
1.1.

!
13
Installations
7.Install the rear camera on the rear windshield using the
adhesive tape or near the license plate using screws.If you
want to use the reversing function then connect the red
trigger cable of rear camera extension cable to the posi-
tive lead of the car reversing lamp. This step is optional
and only recommended for rearview dash camera.
8.Plug the supplied car charger into your vehicle’s acces-
sory port, and the other end into the micro USB port.
Route the cable alongside the interior trim for better
looking.
9.Format the microSD memory card by going to Menu >
System Settings > Format then select Yes.
Video Menu Setting
VIDEO RECORDING
After the car engine is switched on, the camera will
automatically turn on and start recording.
NAVIGATING MENUS
Press MENU button to enter menu setting. When in a
menu, press down or up button to navigate to the menu
then press OK to select or change the option associated
with that item. Pressing menu button at any time will exit
the menu without saving changes.

!
14
Resolution
Choose 4k, 2k, 1080p three resolutions
RECORD LENGTH
This setting allows you to control the duration of each
individual loop clip. It will delete oldest files and record
newer files over and over when the memory card is full
Clips can be set to durations of 1 minute, 3 minutes, 5
minutes.
HDR
High-Dynamic Range (High-Dynamic Range, referred to as
HDR), compared withordinary images, can provide more
dynamic range and image details, according to different
exposure time LDR (Low-Dynamic Range) images, using
each exposure Time corresponds to the best detailed LDR
image to synthesize the final HDR image, which can better
reflect the visual effect in the real environment.
AUDIO RECORD
This device has a Built-in Microphone so you can record
audio along with video. The microphone can easily be
toggled off if you prefer not to record audio.
TIMESTAMP
This option allows you to turn ON or OFF if you want the
time and date to appear on the bottom of the video.

!
15
G-SENSOR
The dash cam has a built-in Gravity sensor, In the event of
a serious vehicle collision or rapid acceleration/ decelera-
tion, the G-sensor will be triggered and immediately lock
current video file so the file will not be overwritten by
loop recording.
Note: Just set "Low", setting the sensitivity too high will
easily lead to too many locked videos and will not be
overwritten by loop recording.
PARKING GUARD
This dash cam parking monitor feature is configured to
record in a time-lapse configuration. It is very useful for
other non-collision incidents that may occur when your
vehicle is parked in a busy parking lot. The camera
captures images using one frame per second, with the
time-lapse format reduces the amount of footage on your
memory card so it doesn’t fill up too fast, but will still
capture anything that happens to your vehicle while it’s
parked. Options OFF / ON, default is OFF.
WIFI
This feature will allow you to turn WiFi broadcast from the
camera so you can connect
your phone with the dash camera to access videos,
photos and settings.

!
16
SCREEN SAVER
Set the time after which the unit will automatically turn
off screen Used to save power and reduce distraction
while driving. For example, it is set to 3 minutes, if the unit
is not operated in 3 minutes, the unit will automatically
turn off screen while the recording is still working, any
button operation or touch the screen will reactivate the
screen display.
FREQUENCY
Here you should choose the frequency accordingly to
your power supply specification used in your country
based on your geographical location. 50Hz or 60Hz
SPEAKER
Speaker volume, mute/low/ medium/ high
LANGUAGE
Sets the on-screen display language to English, Chinese,
traditional Chinese,Japanese,Korean.
DATE/TIME
Set system date, time and date.