ABRIVO VB-44240A User manual

2
Checking Your Package
Before reading the User Guide and using the Abrivo 900 MHz Cordless Telephone,
take a few minutes to check the contents of your package. You should have the
following:
Handset
Base Station with
AC Adapter
Charging Unit with
AC Adapter
Telephone
Cable
800 mAH DC 3.6V
Rechargeable Battery
Belt Clip
Wall Mount
Adapter

3
Understanding Your Telephone
The Abrivo 900 MHz VB-44240A Business Phone is a digital cordless telephone
that allows you to stay connected to your Panasonic PBX - even when you are away
from the desk. This phone includes:
• Digital Spread Spectrum
• Cordless Communication (range varies greatly with environment)
• 2-line LCD display with 16 digits per line
• Vibrator alert
• 10 channels, selectable with the handset
• 6 Function keys (F1 - F4 backlighted)
• 5 Hours of talk time/4 days standby time on one battery charge
(Standby battery time is reduced when features such as the Message icon or
LED lights for programmable function keys are in use.)
• Headset Jack (2.5 mm)
Number Feature Number Feature
1 Ringer ON/OFF Switch 9 Headset Jack
2 Message Display 10 FF-5 (Programmable) Default : Auto
Key
3 FF-6 (Programmable) Default: Program
Key
11 Hold Key
4 Talk Key 12 Redial Key
5 Numeric Keypad 13 Channel Key
6 FF-2 (Programmable) 14 FF-3 (Programmable)
7 FF-1 (Programmable) 15 FF-4 (Programmable)
8 Microphone 16 Volume (R/VOL) Key

4
HANDSET OVERVIEW
The 900 MHz handset has a two-line LCD display. Each line displays up to 16
alphanumeric characters.The display can also show up to four icons:
(Talk, Ringer Off,
Battery Low, and
Message)
Handset Modes
Your handset operates primarily in these modes: Standby, Talk, or Programming.
When you place a call, receive a call, or when you are in a converstation, the
handset is in Talk mode and the Talk icon is displayed. The Talk icon blinks
when Muting is turned on or during channel changes.
When you place a call, the handset LCD display shows the number you are dialing.
When receiving an incoming call, the display shows information about the calling
party such as phone number and name (if incoming line is equipped with Caller ID).
When you are not receiving a call or dialing, the handset goes into Standby mode.
The display is blank, unless the 900 Mhz handset or the key telephone has a call
holding. If either of these conditions occurs, the second line of the handset display
shows the identity of the party on hold. If the holding call is diconnected, the LCD
goes blank.
For information about programming mode, see "Programming Your Handset" on
page 41.
Ringer Off Indication
The Ringer Off icon appears if the ringer is turned off with the R/VOL switch.
Low Battery Warnings
• Standby mode: Battery Low icon appears. A battery low alert tonesounds
once every 15 seconds for three minutes.
• Talk mode: The Battery Low icon appears, and the battery low alert tone
soundsonce every three seconds until the conversation ends. At that time the
handset goes to standbymode.

5
Message Waiting Indication
The Message icon is displayed when a message is waiting. The handset can show
up to 32 characters in the LCD display. If the message is longer than 32 characters,
the message is displayed on two "pages". The display switches between pages at
1.5 second intervals.
Base Station Features
Number Feature
1 Cordless Button
2 Cordless LED
3 Status LED
4 Desk LED
5 Desk Button