Accessory Power LightLink User manual

INSTRUCTION MANUAL
TM

1
3
4
5
6
10
11
7
8
9
Product Diagram
What’s in the box?
Thank you for purchasing the Accessory Power LightLINK LED Camera Light. This
convenient, quick set-up LED camera light provides bright illumination wherever
you need it! With an innovative, interlocking design, you can customize your lighting
innitely! Its compact size and removable, rechargeable battery design oers easy
portability and up to one hour of continuous light per charge.
a - LightLINK camera light
b - Universal mounting bracket
c - OL40B Li-Ion battery
d - AC charger
1 - LED bulbs
2 - ON/OFF switch
3 - Rechargeable battery compartment
4 - Rechargeable battery compartment door
5 - Flip-down AC plug
6 - Battery charger LED
7 - Hot shoe foot
8 - Hot shoe collar
9 - Tripod socket mounting screw
10 - Bracket hot shoe mount
11 - LightLINK expansion slots
2
a
b
c
d
c

Attaching to your camera
The LightLINK can be attached to your camera via your camera’s hot shoe, or
by the (b) Universal mounting bracket that attaches to the tripod socket of your
camera.
Attaching the LightLINK to your camera’s hot shoe mount
First, loosen the (8) Hot shoe collar so that the LightLINK can be connected to
your camera’s hot shoe. Insert the (7) Hot shoe foot into the hot shoe on your
camera with the (1) LED bulbs facing forward. Once the (7) Hot shoe foot is inserted
into your camera’s hot shoe, tighten the (8) Hot shoe collar by turning clockwise
until the (a) LightLINK camera light is locked rmly into place.
Attaching the LightLINK to your camera with the (b) Universal mounting
bracket
Adjust the orientation of the (b) Universal mounting bracket and (9) tripod socket
mounting screw to t the needs of your specic camera model. Connect the
(9) Tripod socket mounting screw to the tripod socket on your camera by inserting
and tightening until the bracket is secure. Loosen the (8) Hot shoe collar. Insert
the (7) Hot shoe foot into the (10) Bracket hot shoe mount with the (1) LED bulbs fac-
ing forward. Once the (7) Hot shoe foot is inserted, tighten the (8) Hot shoe collar by
turning clockwise until the (a) LightLINK camera light is locked rmly into place.
Operating Instructions:

Inserting the battery
Locate the (3) Rechargeable battery compartment on the back of the (a) LightLINK
camera light. Open the (4) Rechargeable battery compartment door and insert the
(c) OL40B Li-Ion battery so that the (+/-) battery contacts are in line with the (+/-)
metal contacts inside the (3) Rechargeable battery compartment. Then, close the
(4) Rechargeable battery compartment door. To illuminate the (1) LED bulbs, locate
the (2) On/O switch on the back of the (a) LightLINK camera light and switch it to
the ON position.
Recharging the battery
Remove the (4) Rechargeable battery compartment door and take out the
(c) OL40B Li-Ion battery. Insert the (c) OL40B Li-Ion battery in to the (d) AC charger so
that the (+/-) battery contacts are in line with the charger contacts. Pull out the
(5) Flip-down AC plug and plug the charger in to your wall outlet. When the
(d) AC charger is charging the (6) Battery charger LED will glow RED. When the
charge is complete the (6) Battery charger LED will glow GREEN and then turn o.
Using the (12) LightLINK expansion slots
You can expand your (a) LightLINK camera light with additional units to make dif-
ferent lighting congurations. To expand your (a) LightLINK camera light, connect
additional units by inserting their (7) Hot shoe foot into one of the three
(11) LightLINK expansion slots with the (8) Hot shoe collar loose and the
(1) LED bulbs facing forward. Once the (7) Hot shoe foot is inserted into the
(11) LightLINK expansion slot, tighten the (8) Hot shoe collar by turning clockwise
until the (a) LightLINK camera light is locked rmly into place.
Operating Instructions (continued):

Troubleshooting
The (a) LED camera light does not turn on.
Make sure that your battery contacts are in line with the (3) Rechargeable battery
compartment and that the (c) OL40B Li-Ion battery is fully charged.
The (6) Battery charger LED lights are not glowing.
Make sure that your (c) OL40B Li-Ion battery contacts are properly connected to
the (d) AC charger and that the outlet is in proper working condition.
My LightLINK won’t t in the hot shoe or (11) LightLINK expansion slots.
Make sure when you are inserting the (7) Hot shoe foot into the hot shoe on your
camera or the (11) LightLINK expansion slots that the (8) Hot shoe collar is loosened
by turning it counterclockwise.

Cautions
- Please only use this product in the manner described in this manual.
- Please keep out of the reach of children.
- Please do not stare at the LED bulbs.
Product Specications
Operating voltage: DC 3.7V
Power dissipation: 4W
Color temperature: 6500K
Light output: 160 LUX
Beam angle: 65°;
Color rendering properties: ≥85%
Average life: 30000H
Dimensions: 6.7 x 3.75 x 1 inches (170.18 x 95.25 x 25.4 mm)
Weight: 4.26 oz (121 g)
Certications: RoHS, SGS, CE

©2010 ACCESSORY POWER
All trademarks and brand names are the property of their owners