Ace Casual Furniture X Rocker CXR4 User manual

Need Help? Email:Email: [email protected]
IMPORTANT: You must keep your original retail receipt as proof of purchase.
HAVE THIS ITEM NUMBER READY WHEN CONTACTING CUSTOMER SERVICE:#

Ϯ
Thank you for purchasing this X Rocker gaming
chair. You are now close to enhancing your
favourite games with glorious audio!
To get started, please assemble the chair using
the assembly instrucons on the separate leaet
and then follow the instrucons in this manual to
get rocking!
Table of contents
4 Box contents and control panel overview
5 Wireless connecon guide: PS4
6 Wireless connecon guide: Xbox One
7 Wireless connecon guide: TV (All systems)
8 Wired connecon guide: TV (All consoles)
9 Wired connecon guide: PS4 Controller only
10 Bluetooth connecon guide
Welcome to X Rocker!
ϭϭ Troubleshoong ps
1Ϯ Warranty Page

ϯ
+
+
+ +
+
+
Control panel overview
B1 - 3m 3.5mm to 3.5mm Audio cable
B2 - 15cm RCA to female 3.5mm audio cable
B3 - RCA female to female adapters
B4 - Power supply Cable
B5 - Wireless DAC Transmier
B6 - 1m Opcal Toslink Audio Cable
B7 - Micro USB Cable
9.84/3m
3.28/1m
2.624/1m
0.492/0.15m
B
B1
B3
B5 B6
B4
B2
+B7

ϰ
Step 3: On the main PS4™ menu screen Select (Sengs) > [Sound and
Screen] > [Audio Output Sengs] > [Primary Output Port] Change this to
[Digial Opcal] > choose AAC.
Wireless connecon guide: PS4
Step 1: Make sure that the PS4™ system is switched OFF. Insert the micro USB cable
into the X Rocker DAC converter and the other end into one of the front USB ports
on the PS4™ system. Remove the clear plasc covers from both ends of the opcal
cable. Input one end of the opcal cable into the X Rocker Wireless DAC (Slot tled
SPDIF) and the other into the Opcal SPDIF connector on the PS4™ system.
Step 2: Turn the PS4™ system back on. Select one of the wireless bands
(1,2,3) on the wireless DAC and then switch to the corresponding band on
the chair.
Back
SPDIF
OPTICAL
Save, exit and enjoy!

ϱ
Wireless connecon guide: Xbox One
Step 1: Make sure that the Xbox One™ system is switched OFF. Insert the
micro USB cable into the X Rocker DAC converter and the other end into
one of the back USB ports on the Xbox One™ system. Remove the clear
plasc covers from both ends of the opcal cable. Input one end of the
opcal cable into the X Rocker Wireless DAC Slot (labelled SPDIF) and
another into the Opcal SPDIF connector on the Xbox One™ system.
Step 2: Turn the Xbox One™ system back on. Select one of the wireless
bands (1,2,3) on the wireless DAC and then switch to the corresponding
band on the chair.
Step 3: On the Xbox One™ menu screen, Select (Sengs) > [All Sengs]
> [Display and Sound] > [Audio Output] > under [Digital Audio], select
[Opcal Audio] and set it to [Stero Uncompressed]
Back
SPDIF
Save, exit and enjoy!

Wireless connecon guide: TV
(All systems)
1. Connect B6 Opcal Cable to the B3 Wirelesss DAC transmier’s SPDIF Port.
2. Connect other end of B6 Opcal Cable to the TV Opcal socket.
3. Connect Micro USB Cable to the transmier and other end to an
available USB socket on the TV.
4. Once connected to your TV, increase volume to 50% of the maxiumum
for the best sound level.**
* N.B: If your TV does not feature an SPDIF or OPTICAL OUT Socket then you can
instead use the 3.5mm audio connecon to connect to a headphone socket.
** Depending on your TV you may need to enable the Opcal output seperately.

B7
B6
Transmier
TV/SPDIF/Opcal Socket
TV USB socket
6

ϳ
Wired connecon guide: TV
(All consoles)
1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.
2. Connect other end of B1 3.5mm end into the headphone socket of
your television.
3. Once connected to your TV, increase volume to 50% of the maximum
for the best sound level. **
** Depending on your TV you may need to increase the headphone
volume separately in the TV sound sengs.
TV/Mobile/Tablet
B1

ϴ
Wired connecon guide: PS4
Controller only
1. Connect the B1 cable to the boom of the PS4 controller via the
headset socket.
2. Connect the other end of the B1 cable to the chair via the green port.
3. With the PS4 turned on, go to the main menu (or locate the main
menu screen). Press and hold the PS buon on the PS4 controller unl
the quick menu appears on screen.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the seng from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
8. Set the control panel Wireless switch to the ‘OFF’ posion.
B1

ϵ
Bluetooth connecon guide
Step 1:
Switch the X Rocker Avan’s wireless switch to the Bluetooth posion.
Step 2:
On the Audio output device
go into its Bluetooth sengs,
turn Bluetooth on if it is not
on already and search for
XROCKER. Upon nding this,
select the XROCKER opon.
If a passcode is required the four
digit code will be ‘0000’.

1Ϭ
6
TROUBLE SHOOTING
- Unable to connect to game console -
Make sure the band is on “ ” position,
Make sure the volume of X Rocker and the volume of mobile music device is set to a comfortable listening level.
Make sure you are within range of the X Rocker and your mobile music device is connected via Bluetooth technology
with the X Rocker.
·
·
·
Make sure that therez is no wired line that insert in your device before using bluetooth.
·
5.
Most game consoles are shipped from the manufacturers with an Audio/Video RCA cable. The A/V RCA cable has three
RCA plugs: a video plug (yellow) and two audio plugs (red and white). If your gaming console came with an A/V RCA cable.
please follow the instructions supplied by the manufacturer for setting it up and connecting it to the TV. Please note that
you must leave the red and white audio jacks on the A/V cable UNCONNECTED. Once the console is properly connected to
your TV, plesse follow the diagram in the illustrated X Rocker Set-up guide to connect the gaming console to the X Rocker.
If your gaming console was shipped with a coaxial cable, instead of an A/V RCA cable, you must follow an alternate set-up
procedure (coaxial cable is the same type of cable that is used to connect a VCR to a TV). You will quickly recognize if your
gaming console uses this type of cable. It connects the gaming console directly to the television and carries both the audio
and video signal over a single cable. If your gaming console uses a coaxial cable, you CAN NOT connect it directly to the
X Rocker . Instead, you must
1. Check to ensure that the power adapter is properly connected to the power jack. When properly connected,the
indicator light on the control panel should light up when the power switch is turned on. If the indicator light
does not light up, try to use another power outlet in your home.
2. Make sure the power unit is turned on and indicator light on the control panel is lit. If it is not, please press the power
switch on the control panel.
3. When you use wire mode, make sure the band is on “AUX” position.
4. When you use Bluetooth mode:
- Unable to hear any sound from the X Rocker -
Use an intermediary A/V device (such as a TV,VCR, DVD, TiVO, etc)
a. Connect your gaming console to the intermediary A/V device via the coaxial cable.
b. Connect the X Rocker to the’Audio Out’jack on the intermediary A/V device.
c. Follow diagram 2 in the X Rocker set-up guide to connect the X Rocker to the intermediary A/V device and
finalize the setup.
If your gaming console is attached to an HD TV with an HDMI cable. You will need to connect the chair using either the
audio out jacks on the back of the TV or by plugging into the headphone jack on the front of the TV.
For service assistance, product information, or to locate a dealer nearest you please call or write to:
Ace Casual Furniture
671 CRESTLAND ST.
LEWISBURG,TN 37091 UNITED STATES
TEL:[phone]
[e-mail]
Once you have successfully completed 1.-4. please review the X Rocker illustrated set-up guide. Double check all audio
connections. Finally, check that the volume on the hand remote is turned to an audible level on both the TV and the chair.
If you have completed 1-5 and still do not hear sound, try connecting another audio source (CD player,
television, VCR or game console) and go through the steps again. Still not working? Help is as easy as 1,2,3:
1). Go to www.xrockernation.com for FAQ answers.
2). Email [e-mail].
3). Call our customer service department at 866.969.2603 or 931.359.2603.Office hours are 8:30am to 5:00pm central
standard time.
DO NOT SHIP ANYTHING TO US WITHOUT CONTACTING US FIRST. DO NOT SHIP ANY PARTS OR WHOLE UNITS TO THIS
ADDRES FOR REPAIR WITHOUT OUR PERMISSION.

1ϭ
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts. L'exploitation
est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas causer d'interférences, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements
non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
Limited Warranty:
Ace Casual Furniture warrants this product (including any accessories) against defects in material and workmanship for a period of
90 days from the date of purchase This warranty is enforceable only by the original purchaser.
ALL DAMAGED OR MISSING PARTS MUST BE REPORTED WITHIN 14 DAYS OF PURCHASE.
Ace Casual Furniture will repair or replace (at its discretion) units covered by this warranty without charge to the consumer for
labor or materials. YOU ARE RESPONSIBLE FOR INITIAL SHIPPING CHARGES. However, we will pay the return shipping
charges to any destination within the usa if repairs are covered by the warranty.
This warranty covers all defects in material and workmanship in this product, but DOES NOT COVER the following:
1. Damage, deterionration or malfunction resulting from:
a. Acts of God, accident, misuse, abuse, negligence, improper installation, maintenance or operation, or failure to
follow the instructions contained in this owner’s manual.
b. Any damage in the shipment of the product. (Claims must be presented to the carrier.)
c. Repair, attempted repair, or modifications by anyone other than the Ace Casual Furniture Service Center.
2. Any unit which has been modified or attempted to be modified or altered in any way whatsoever.
3. Normal wear and periodic maintenance.
4. Any unit used for industrial or commercial purposes (including rental).
5. Products sold AS IS or WITH ALL FAULTS,or consumables (such as fuses, batteries, etc)
6. Customer installation, set up adjustments, or signal reception problems.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. ACE
Casual Furniture SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY ADN FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE LENGTH OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations may not apply to you.
WARRANTY PAGE

1Ϯ
Need Help? Email:[email protected]
Phone: [phone]
www.XRockerNaon.com
IMPORTANT: You must keep your original retail
receipt as proof of purchase.
Email [e-mail] or call