TREQ FORMULA SEAT User manual

FORMULA
SEAT
INSTRUCTION MANUAL
REQUIRED TOOLS:
4-6 mm 7 mm

GENERAL INSTRUCTIONS
123
Click!
123
Break!
REQUIRED TOOL:
The easiest way to mount the click-in-nuts, is to slide them in from one side of the profile. But
don't worry if you need to put in a click-in-nut in a profile which has both ends already closed: it
is also possible to push them in the T-slot anywhere you like!
The corner brackets feature 4 little hooks to stop the bracket from rotating once it is mounted
on a profile. But on some places of the rig these corner brackets are placed on a 90° angle of
the T-slot. In these situations it is recommended to break off 2 of the hooks, which is easily
done with a screwdriver.

1
1x 1x 1x
Bottom Plate
Profile 8040 L=250 Top Plate
www.treq-sim.com
Bottom Frame Plate
2x
1x
Profile 4040 L=250
1x
Top Frame Plate
2x 4x
Adjustable Handle
8x
Corner 4040
Corner Cover 4040
8x
Cushioning
6x
Click-in Nut M6

www.treq-sim.com
M8x25
8x
M6x16
14x
M8x20
6x 8x
Nut M6
4x
Click-in Nut M8
2
Plain Washer M6
8x 8x
Nut M8
Plain Washer M8
8x
M6
(6x)

3
4
www.treq-sim.com
M8x20
(6x)
M8x25
(8x)
M8
(8x)
M8
(8x)

5
6
www.treq-sim.com
M6x16
(6x)
M6
(4x)
M6
(4x)
M6 (4x)
M6 (4x)
M6x16
(8x)

7
8
www.treq-sim.com

7
www.treq-sim.com
Slide the cushioning on chair. This might feel tight (especially the bottom part), but this is
done to ensure they keep in place when you’re racing. Try to do it with two persons if
alone it feels impossible to get the cushion over the metal plates.