Acer p700 Series User manual

Acer p700 Series
Portable Navigator
User's Guide

i
Copyright © 2007. Acer Incorporated.
All Rights Reserved.
Acer p700 Series Portable Navigator User Guide
Original Issue: July 2007
Changes may be made periodically to the information in this publication without obligation to notify any
person of such revisions or changes. Such changes will be incorporated in new editions of this User's Guide or
supplementary documents and publications.
Record the model number, serial number, purchase date and place of purchase information in the space
provided below. The serial number and model number are recorded on the label affixed to your handheld. All
correspondence concerning your unit should include the serial number, model number, and purchase
information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission
of Acer Incorporated.
Acer p700 Series Portable Navigator
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or
trademarks are used herein for identification purposes only and belong to their respective companies.
Microsoft, Outlook, Pocket Outlook, Windows, Windows NT and the Windows logo are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft
products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
Acer and its subsidiaries make no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular
purpose. Acer and its subsidiaries assume no responsibility for any damage or loss resulting from the use of this
Acer p700 Series Portable Navigator User Guide.

Disposal instructions
ii
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please reuse and
recycle.
USA
For electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the Electronic
Industries Alliance at www.eiae.org. For lamp-specific disposal information, check
www.lamprecycle.org.
Important safety instructions
Read these instructions carefully. Save them for future reference.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a water-moistened cloth for cleaning.
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product falls, it
could be seriously damaged.
This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
Do not allow anything to rest on the power cord. Do not locate this product where
people will walk on the cord.

Disposal instructions
iii
If an extension cord is used with this product, make sure that the total ampere rating
of the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the total rating of all products plugged into the
wall outlet does not exceed the fuse rating.
Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind onto or into the product.
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
• When the power cord or plug is damaged or frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
• If the product has been dropped or the case has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for
service.
The Acer p700 Series Portable Navigator uses a lithium battery.
Warning! Batteries may explode if not handled properly. Do not disassemble or
dispose of them in fire. Keep them away from children and dispose of used batteries
promptly.
To avoid hazard of unexpected electrical shock, use the AC adapter only when the
wall socket is properly grounded.
Do not use your device while exercising.

Acer p700 Series Portable Navigator feature highlights
iv
Acer p700 Series Portable Navigator feature highlights
No more fumbling with wieldy, outdated paper maps. No more sheepish "I think I’m
lost"expression. And most definitely, no more going in circles finding that particular
spot. Get to your destination the fast and easy way with your new Acer p700 Series
Portable Navigator .
Powerful system
• Microsoft Windows CE version 5.0 operating system
• Samsung 266 MHz processor
• SiRF Star III LP chipset and firmware solution
• Rechargeable 1100 mAh Lithium Ion battery
Wide and accurate GPS coverage
• Intuitive and Intelligent Navigation software
• Integrated chip antenna for optimum satellite pick up
Mobile design
• Compact and lightweight body makes it easy for users to carry it anywhere
while driving or hiking
• Car mount kit for multi-vehicle usage
• On-the-road recharging options via the car charger
Battery life
• Normal usage: 4.5 hours
• Navigation software usage: 3.5 hours
Ergonomic features
• 4.3-inch WQVGA touch-sensitive LCD screen
• Accessible control hot keys with backlight illumination
• Simple, easy-to-use user interface with large icons and command buttons
• Multi-language support for user interface
• Advanced power-saving options
Multimedia programs
•Photo for your favourite digital pictures
Contacts management program
•Contacts for managing contact information on your device
Bluetooth program
•Bluetooth for selected models only: p760 and p780
• Making and receiving phone calls

Unpacking the Acer p700 Series Portable Navigator
v
Unpacking the Acer p700 Series Portable Navigator
Thank you for purchasing the Acer p700 Series Portable Navigator . The Acer p700
Series Portable Navigator
box contains all of the items listed below.
•
Acer p700 Series Portable Navigator unit
• Car mount kit
Car mount Device holder
•Carcharger

Unpacking the Acer p700 Series Portable Navigator
vi
• Wall charger for p700 Series
• Mini USB transfer and charge cable
• Navigation software SD card

Unpacking the Acer p700 Series Portable Navigator
vii
•Pouch
• User Documentation
–
Acer p700 Series Portable Navigator CD
– TMC ready for p700 Series Portable Navigator Getting Started Guide
–
Acer p700 Series Portable Navigator Warranty Booklet
– Navigation software Quick Starter Guide
– Navigation software CD
– User can purchase Acer TMC upgrade kit for p710 to enable the TMC
function
– The p730/p760/p780 already include the TMC receiver in the package
NOTE: Report any product defects or missing items to the place of purchase immediately.
Save the boxes and packing materials for future use. Some models may include optional
accessories that might not be shown in the above illustrations. Please check with your dealer
or dial a hotline number, located on the back of the Acer p700 Series warranty booklet, for
more details.

Acer p700 Series Portable Navigator setup
viii
Acer p700 Series Portable Navigator setup
Using your new Acer p700 Series Portable Navigator for the first time is a snap.
Unpack, turn on, mount and you’re ready to go. Perform the following easy
installation tasks to start using the device straight out of the box:
1. Unpack the device.
2. Set up the device in your vehicle.
NOTE: You should not use the power switch again unless you want to do a hard reset. See
"Performing a hard reset" on page 54 for more information. Instead, use the power button
at the top of the device (see diagram below).

First things first
System tour
ix
First things first
This chapter describes the hardware interface of the Acer p700 Series Portable
Navigator
and its peripherals. Instructions for setting up the device and some basic
system operations are also discussed.
System tour
This section gives you a tour of the device hardware interface.
Front and Rear Panels
7

First things first
System tour
x
NOTE: For more information on how to use your Acer p700 Series Portable Navigator in
navigation mode, refer to the Navigation software Quick Starter Guide or the Navigation
software User’s Guide (located on the Navigation software DVD).
No Icon Component Description
1 Touch screen Displays the applications, data, and map
images available on your device. It is
touch sensitive and responds to finger
taps.
2 Power status LED indicator Indicates the battery charging status.
• Green – Battery is fully charged
• Orange – Battery charging
• Red – Battery low
3 Volume down button Decreases speaker volume.
4 NAVI Navigation button Takes you to the navigation panel to
display your current location.
5 Microphone Internal microphone is used during
phone communication.
6 Volume up button Increases speaker volume.
7 Speaker Emits system sounds.

First things first
System tour
xi
Top and bottom views
No. Icon Component Description
1 Power button Switches the device into standby
mode. If pressed for less than 1.5
seconds, the device will enter suspend
mode; if pressed for longer then 1.5
seconds, the backlight will turn On/
Off.
2 GPS GPS antenna jack Connects to an external GPS antenna.
3 Soft reset button Used to do a soft reset of the device.
For more information, see
"Performing a soft reset" on page 53.
4 USB port For USB port: connects the device to
computer running on the Microsoft
Windows platform. Also serves as the
power connector for charging the
device. Connects to external TMC
module (selected models only).
5 Power switch Used to switch device on initially, or to
do a hard reset of the device. For more
information on performing a hard
reset, see "Performing a hard reset"
on page 54.
1
1
2
345

First things first
System tour
xii
Left and right panels
No. Icon Component Description
1 Earphone jack Connects to earphones/headphones.
2 SD/MMC slot Accepts SD and MMC storage cards, allowing you to
use audio, image, and/or map files stored in it for use
with internal applications.
1
2

First things first
Peripherals tour
xiii
Peripherals tour
This section gives you a tour of the peripherals bundled with your Acer p700 Series
Portable Navigator
.
Car mount kit
The car mount kit consists of the car mount (left) and the car holder (right).
1265
43 7
No. Component Description
1 Holder plate Connects the car mount to the holder.
2 Horizontal angle adjustment knob Slightly loosen the knob to adjust the
viewing angle in a left-right direction.
3 Vertical angle adjustment knobs Slightly loosen the knobs to adjust the
viewing angle in an up-down direction.
4 Suction cup locking lever Secures the vacuum seal of the car mount.
5 Suction cup Fixes the car mount on the selected
mounting area.
6 Suction cup release tab Pull to release the vacuum seal of the
suction cup.
7 Car mount holes Accepts the pegs on the holder plate of the
car mount.

First things first
Setting up the Acer p700 Series Portable Navigator in your vehicle
xiv
Setting up the Acer p700 Series Portable Navigator in
your vehicle
The Acer p700 Series Portable Navigator comes with a car mount kit and a car charger
so you can set up your device in your vehicle. Position the car mount kit on the
windscreen using the suction cup.
NOTE: Some newer vehicle models may have a heat reflective shield embedded in the
windscreen. This may in some cases obstruct the GPS signal reception. If you encounter this
problem in your vehicle, you need to purchase an external GPS antenna. For more
information, contact your local Acer dealer.
Car mount installation reminders
Install the car mount on a surface of your vehicle:
• That is smooth, and free of dirt and oil.
• Where you can easily view/reach it without taking your eyes too far off the
road.
• Where the device will not obscure car controls nor restrict your view of the
road.
• Far from the air bag deployment area.
Setting up the device on your vehicle
This section shows how to install the car mount kit on your vehicle's windscreen using
the suction cup. For dashboard installation procedures using the self-adhesive disk
refer to the
Acer p700 Series Portable Navigator Getting Started Guide.
1 Clean the mounting surface with a glass cleaner and a clean cotton cloth.
2 If the ambient temperature is below 15°C (60°F) warm the mounting area and the
suction cup (e.g. with a hair dryer) to ensure a strong suction bond.
3 Install the car mount on the selected area.
• Fix the suction cup to the selected area with the locking lever facing up.
• Flip the locking lever away from you to create a vacuum between the suction
cup and the mounting surface.

First things first
Setting up the Acer p700 Series Portable Navigator in your vehicle
xv
• Make sure that the suction bond is strong enough before proceeding to the
next step.
• You can now adjust the car mount to your desired position.
4 Insert the Navigation software SD card into the device.

First things first
Setting up the Acer p700 Series Portable Navigator in your vehicle
xvi
5 Dock the device on the car holder.
6 Dock the device with holder on the car mount which has been mounted to your
windscreen then adjust the car mount for the best viewing angle.
7 After setting up the device on the car mount, connect the car charger. The power
LED indicator lights up orange during charging.
NOTE: If the car engine is turned off, you may be required to switch the vehicle ignition back
into the Accessories position. Consult your vehicle owner's manual.
NOTE: The device comes with the battery pre-charged to at least 30 percent capacity. You can
start using it once it is mounted in your vehicle and connected to the cigarette lighter.
However, for maximum usage time you need to charge your device to full capacity. Go to
"Recharging the Acer p700 Series Portable Navigator" on page 8 for instructions.
++

First things first
Starting up the Acer p700 Series Portable Navigator
xvii
Starting up the Acer p700 Series Portable Navigator
Before mounting the Acer p700 Series Portable Navigator on your vehicle, you should
first calibrate the screen. After screen calibration, proceed to configure system
settings. To turn on and calibrate the device:
1 When you first turn on your device, you will be asked to calibrate the screen. This process
ensures that when you tap the screen the item tapped is activated.
2 Follow the instructions on the screen. After calibrating the screen, please follow
the steps below to configure system settings.
Step 1: Language Setting
– Tap the down arrow beside Text and choose the language you prefer.
Step 2: Date/Time/Time zone Settings
Tap Date:
– Tap +or -beside the Year, Month, and Day settings to set the date
values.

First things first
Starting up the Acer p700 Series Portable Navigator
xviii
Tap Time:
– Tap +or -beside the Hour and Minute settings to set the time values.
– Tap the down arrow beside the Time Zone until the time zone of your
choice is displayed.
Step 3: Password Setting
After Date/Time/Time Zone settings is done, the screen below will pop up.
– Tap YES to set up your password, or tap NO to skip.