Acer Ferrari F-17 User manual

Table of Contents
Precautions.2
Package contents.3
Installation instructions.3
Assembling the Monitor.3
Repackage the Monitor.4
Adjusting the Viewing Angle.4
Connecting the Devices.5
Switching the Power.5
Adjusting display settings.6
F.xtemal Controls.6
OSD options.7
OSD Menu.7
Troubleshooting.9
General specifications.10
Recycling Information
Any question about recycling monitors, please contact Acer agents.
For more lnformatron about Acer, please visit
http://www.acer.com

screen has effective pixels of 99.99% or more. It may inch
or less such as a missing pixel or a pixel lit all of the time.
5 nature of the LCD screen, an afterimage of the previous scr

Package contents
Installation instructions
Assembling the Monitor
1 Put the base of monitor on the desk
carefully.
3

Repackage the Monitor
Save the original box and packing material in case you have to ship or transport the monitor.
Repackage the monitor:
1. Unplug the power cord to make sure the power is off.
2. Put the monitor into carton carefully.
Important
To find a clean and flat surface table place the monitor .
To select clean and dry clothes put under the monitor for ; riding scratches.
Adjusting the Viewing Angle
The viewing angle of the monitor ranges from -5°~3S°.

Connecting the Devices
W Caution: Make sure that the computer and the
power supply.
©
AC/DC Adapter
With power cord
Connect the plug of the AC/DC adapter to the (DC IN ) socket of the
monitor , then be insert the power cord into the adapter and a properly
grounded electric socket.
© VGA Cable Connect the signal cable to the VGA input socket (VGAIN) of the
monitor , and connect the signal cable to the VGA output socket of the
graphics card on the computer. Then tighten the thumbscrews on the
connector.
Audio Cable Connect the audio input socket (AUDIO IN) of the LCD monitor and
the computer by means of the audio cable.
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure
the shape of the plug matches the shape of the socket it is inserted into, and
that none of the pins are bent or otherwise damaged.
Switching the Power
First, switch the power on to the monitor, then switch the power on to the computer. When you
see the LED on the power button go blue, this indicates the computer is ready for use. Allow
about 10 seconds for the video signal to appear. If you do not see the blue light LED on the power

Adjusting display settings
External Controls
©
<b
POWER
Power on/off
Blue: power on
Orange: in sleep mode
©
MENU
OSD
Function
Press to view OSD.
If OSD is active, press to exit a selection in OSD.
©
/\
UP/ PLUS
If OSD is active, press to select or adjust OSD options. If OSD is
inactive, press once, then press the buttons marked A or V to
adjust the volume.
©
V
DOWN/
MINUS
If OSD is active, press to select or adjust OSD options. If OSD is
inactive, press once, then press the buttons marked /\ or v to
adjust the volume.
©
AUTO
AUTO
If OSD is active, press to enter a selection in OSD. If OSD is
6

OSD options
Please refer to "External Controls" on Page 6.
To adjust the OSD settings:
1. Press the MENU button to open the OSD main menu.
Warm (Reddish white)
Cool (Bluish white)
User : You can adjust the colors red, green and blue to the
intensity you desire.
clear and sharp.
akes the picture
Clock:
If there are any vertical stripes seen on the background of the
screen this renders them less noticeable by minimizing their size.
It also changes the size of the horizontal screen.
H-Position:
This adjusts the horizontal screen position.
This adjusts the vertical screen l position.

Volume: Adjusts the volume.
Mute : on /off
^ Options
Auto Config. :
System runs auto-configuration.
Reset:
Recall to default settings.
Information:
This shows brief information on the screen.
Settings
Language:
Select the OSD menu language from
English, French, German, Italian, Spanish, Simplified Chinese,
Traditional Chinese, Japanese and Russian.
OSD H. Position
OSD V. Position
OSD Time-out
This changes the position of the OSD window on the screen and
staying time.

Troubleshooting
be solved in "Troubleshooting" section.
9

General specifications
LCD Panel
Display 17-inch Flat panel active-matrix TFT LCD
Max resolution SXGA 1280x1024 pixels
Pixel Pitch 0.264 mm
Color 16.2M
Brightness 400 cd/m 2 (Typical)
Contrast Ratio 500:1 (Typical)
Response Time Sms (Typical)
View Angle of Horizontal 140°
View Angle of Vertical 130°
External Controls
Power Button ON/OFF
Control Buttons
MENU/ a / v /AUTO
OSD Function
Picture
Contrast / Brightness /Color Temp. /Focus / Clock / H-Position /
V-Position
Audio Volume /Mute
Options Auto config. / Information / Reset
Settings Language / OSD H-Position / OSD V-Position / OSD time-out
Video Interface
Video Analog 0.7V
Sync TTL (+/ -)
Audio 2Wx 2
Plug&Play DDC2B
Power
Power Source 100—240V AC, 50/60 Hz
Power consumption during
normal operation
50W, approx.
Power consumption during
<2W
Dimension and Weight
Dimension (W II - D) 415X424.7X190.6 mm (with stand)
Weight (Net' Gross) 5.2/7.3 kg
Lamp Disposal
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF
/£T\ ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE
(Hg ) ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG . FOR LAMP SPECIFIC DISPOSAL
' INFORMATION CHECK WWW.LAMPRECYCLE.ORG .
10