Acesori PowerPack5 Technical manual

PowerPack5
soricea TM
User Guide & Warranty
Thank you for choosing Acesori. Please follow
both sides of this user guide to ensure proper use.
Acesori is pleased to cover your Acesori accessory for a period of
one (1) year from the date of purchase. Please contact us any time within
that year for any technical assistance with your Acesori item.
Email: suppor[email protected] Website: www.acesori.com
Warranty Information
See website for full warranty conditions
Charging The PowerPack: Plug the small end of the included MicroUSB
cable into the “Input” port on the PowerPack.The other end of this cable,
plug into a USB power source such as a USB power adapter or computer
USB port.When properly connected, the LED light on the PowerPack will
turn on and display its battery level; as shown in the diagram on the
reverse side of this guide.The charging time will vary, however a typical full
charge takes approximately 8 hours.
Charging Your Device: You will need the cable that came with your
phone, tablet or other device. Plug one end of that cable into your own
device and the other end (USB) into the “Output” port on the PowerPack.
Once properly connected, the LED indicator light will turn on and display
the battery level remaining in the PowerPack.Your device will begin
charging.
Display Current Battery Level: To display the current battery level of
the PowerPack, simply give it a light “Shake.” Make sure no cables or
devices are connected to the PowerPack before shaking .
�

ACESORI.COM
Charging Panel
soricea PowerPack5
Indicator Light
USB Output
MicroUSB
Input
100%
75%
50%
25%
to
to
to
to
76%
51%
26%
1%
LED Battery Level Light
Important Notice
1. Fully charge the PowerPack before its first use.
2. It is normal for the PowerPack to be warm during the charging process.
3. Keep the PowerPack clean and dry without using any chemical cleaners.
4. Do not let children handle the PowerPack.
5. Do not puncture, disassemble, crush or dampen the PowerPack.
6. Do not leave the PowerPack in a high temperature environment for
extended periods of time.
7, Do not input non-compliant voltage into the PowerPack.
8. To extend the life of the battery, fully charge the PowerPack once every
four months and store in a cool, dry place.
9. Follow local and state regulations for recycling this device; and other
laws governing its use.
PowerPack Diagram
OutputInput