Acme Furniture Raegan 91245 User manual

ITEM NO.91245 TV STAND
A
B
C
TOP FRAME
1PC
MIDDLE FRAME
1PC
BOTTOM FRAME
1PC
D
E
F
ACRYLIN STRETCHER
8PCS
GLASS
3PCS
1
2
3
BOLT 1/4" X 1/2"
16PCS
LEVELER
4PCS
GLASS PAD
18PCS
4
5
6
L BRACKET
4PCS
WALL ANCHOR
2PCS
SCREW
2PCS
7
8
9
PLASTIC STRAP
2PCS
ALLEN WRENCH
1PC
ASSEMBLY INSTRUCTIONS

*** Do not tighten screws & bolts until the entire unit is completely assembled. ***
STEP 1
Attach acrylic stretcher (D)
to top frame (A) and middle
frame (B) by using bolt (1).
Add L bracket (4) when
using bolt (1) to attach
acrylic stretcher (D) to top
frame (A) as shown.
STEP 2
Attach acrylic stretcher (D)
to the assembled unit and
bottom frame (C) by using
bolt (1), and attach leveler
(2) to bottom frame (C) as
shown.

STEP 3
Attach glass pads (3) to
each frames (A, B, C), and
place the glass (E) on the
assembled unit as shown.
STEP 4
Select a location where you
want the TV stand mounted.
Mark on the wall the two
locations where the wall
anchor (5) will be placed.
Drill a hole for each anchor
slightly smaller than the size
of screw (6). Push the
anchor (5) as far as it will go
with your finger. Tap gently
with a hammer until the
anchor is in. Then align the
L bracket (4) to the anchor
and insert a screw (6) to
secure.
Wall
32”

STEP 5
Insert each end of the
plastic strap (7) into L
bracket (4), then secure and
tighten.
Wall