Acme Furniture BD00613 User manual

*** Thank you for purchasing this quality product. Be sure to check all packing materials
carefully for small parts whichmay have come loose inside the carton during shipment. Identify
and count all parts and compare with parts list below.
*** Assemble producton a flat, soft surface such as a carpet or cloth to prevent scratching the
finish. Read all instruction and study the drawings carefully before starting the assembly
process.
IMPORTANT: Do not tighten bolts completely until all
bolts are completely lined up and inserted into holes
Item No: #BD00613
ASSEMBLY INSTRUCTIONS
PAGE1 OF 9

PARTS LIST HARDWARE LIST
NO. PARTNAME Q'TyDIAGRAM NO. PARTNAME Q'TyDIAGRAM
FrontGuardrail
Headboard(Left)
Headboard(Right)
GuardrailSupport
LowerBack Rail
BottomFrame
SupportRail
DrawerSupport Rail
LadderStep
LadderRail (Left Side)
LadderRail (Right Side)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
3pcs
1pc
1pc
5pcs
2Sets
Bolt6.3 x 80mm
Bolt6.3 x 100mm
HalfRound Nut 6.3 x 22 x 10mm
WoodDowel 10 x 40 (mm)
A
B
C
D
E
F
G
H
86pcs
12sets
3pcs
1pc
10pcs
Screw4 x 30 (mm)
4pcs
Bolt6.3 x 35mm
Bolt7 x 100mm
6pcs
TOOLREQUIRED:
Cross-headScrewdriver (Not provided)
I
PAGE2 OF 9
BackGuardrail
SlastKit (14pcs/set)
DrawerFront Panel
15 DrawerRight Panel
16 DrawerLeft Panel
17 DrawerBottom Panel
18 DrawerBack Panel
19 Slide
3pcs
3pcs
3pcs
3pcs
3pcs
3pcs
J1pc
AllenKey (M4)
Bolt6.3 x 55mm 2pcs
Bolt7 x 50mm
Bolt7 x 50mm
13pcs
5
3
1
4
2
67
89
10
11
12
13
14
15
18
17
19
16
K2pcs
Screw4 x 20 (mm)

Carton Part Hardware
Disignation
#BD00613 is packed in 2 cases
PAGE3 OF 9
Headboard (Left)
Headboard (Right)
1
2
Front Guardrail
Guardrail Support
LowerBack Rail
Bottom Frame
Support Rail
Drawer Support Rail
Ladder Step
Ladder Rail (Left Side)
Ladder Rail (Right Side)
Back Guardrail
Slast Kit (14pcs/set)
Drawer Front Panel
Drawer Right Panel
Drawer Left Panel
Drawer Bottom Panel
Drawer Back Panel
Slide
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Bolt6.3x 80mm
Bolt
HalfRoun
6.3x100mm
dNut6.3 x 22 x 10mm
WoodDowel10 x 40 (mm)
Screw4x 30 (mm)
Bolt6.3x 35mm
Bolt7x 100mm
AllenKey(M4)
Bolt6.3x 55mm
Bolt7x 50mm
Bolt7x 50mm
Screw4x 15 (mm)
#BD00613-1
#BD00613-2

PAGE4 OF 9
STEP 2:
GUARDRAILS ASSEMBLY
STEP 1:
2 pcs
D
INSERT UPPER FRONT / BACK RAIL INTOTHE HEADBOARDS ASSEMBLY
1 pc
F
B
J
B
E
J
8 sets
B
3 pcs
E
7 pcs
I
B
J
B
3
5
2
4
3
1
J
F
J
D
I
I

LOWER BACK RAILASSEMBLY
STEP 3:
BOTTOMFRAME / SUPPORT RAIL AND DAWER SUPPORT RAIL ASSEMBLY
STEP 4:
4 sets
B
2 pcs
I
I
B
J
B
6
H
J
6 pcs
H
98
7
PAGE5 OF 9

PAGE6 OF 9
STEP 5:
STEP 6:
THE BOTTOM FRAME INTO THE BED ASSEMBLY
x10
G
J
12
10
11
LADDER ASSEMBLY
C
A
4 pcs
2pcs
A
I
I
7
8
J
C
4 pcs

PAGE7 OF 9
STEP 7:
A
56 pcs
A
STEP 8:
PUT LADDER ON BED ASSEMBLY
COMPLETED TWIN SLATS KITASSEMBLY
2 pcs
H
K
2 pcs
K
J
H
2 pcs

PAGE8 OF 9
STEP 9:
STEP 10:
DRAWERASSEMBLY
PUT DRAWER IN TO THE BEDASSEMBLY
x 3
10 pcs
A
A
A
A
A
A
14
15
18
17
19
16

PAGE9 OF 9
STEP 11:
Tohelp prevent serious or fatal injuries from entrapment or falls:
WARNING !!!
1.Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
notremove warning label from bed.
2.Use only mattress which is 39" WIDE AND 75" LONG ON UPPER BUNK.
3.Ensure thickness of upper mattress does not exceed 6” and top surface of mattress is at least 5” below the
upperedge of guardrails.
4.Do not allow children under 6 years to use the upper bunk.
5.Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free
fromdamage, and that all connectors are tight.
6.Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7.Always use ladder for entering and leaving upper bunk.
8.Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
9.Use of a night-light may provide added safety precaution for a child using the upper bunk.
10.Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to a-wall, the
guardrailthat runs the full length of the bed should be placed against the wall to prevent entrapment between
thebed and the wall.
11.The use of water or sleep flotation mattresses is prohibited.
STRANGULATIONHAZARD:
12.Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example,
butnot limited to, hooks, belts and jump ropes.
13.Prohibit more than one person on upper bunk.
14.Maximum total weight not to exceed-150 lbs on the upper bunk, and maximum 200 lbs on lower bunk.
15.Keep these instructions for future reference.
ASSEMBLYIS COMPLETED