Acnodes APS901 Series User manual

Industrial Panel Mount Monitor
APS901X
15” / 17” / 19” Panel Mount LCD
S t a i n l e s s S t e e l C h a s s i s
I P 6 5 R a t ed F r o n t B e z e l
Industrial
Monitors
User Manual
All rights reserved. Product description and product specifications are subject to change without notice.
For lastest product information, please visit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA91710 Tel: [phone] Fax: [phone]
© Copyright 2015 Acnodes Corp.

Warning!
Disclaimer
This information in this document is subject to change without notice. In no event shall Acnodes Corp. be
liable for damages of any kind, whether incidental or consequential, arising from either the use or misuse
of information in this document or in any related materials.
Electric Shock Hazard –Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual. It may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class Acomputing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.

Table of Contents
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Chapter 1 Getting Started
1.1 Features………………………………………………………….…..…..…4
1.2 Specifications…………………………………………....……………...…..4
1.3 Dimensions…………………………………...………………………….…6
1.4 Brief Description...................................................................................9
1.5 Display Mode………………………………………………………………10
Chapter 2 OSD
2.1 Front Panel Controls………….………………………………….…..…….11
2.2 OSD Controls………………………………………………………………..11
2.3 Main Menu…..……………………………………………………………..12
2.4 AD Board OSD Functions…………..…………………………………14
Figures
Figure 1.1: Dimensions of APS9015…,……..…………..…...…………..6
Figure 1.2: Dimensions of APS9017..………..………..…..……………..7
Figure 1.3: Dimensions of APS9019.….……..……..……..……………..8
Figure 1.4: Front View…..….………………………………………………….9
Figure 1.5: Rear View…………………..……………………………………...9
Figure 1.6: VESA mounting of the APS901X…………………………...15

Chapter1
1.1 Features
●Stainless Steel Display
●Five edges panel NEMA 4/IP 65 rated
●Resistive touch screen (optional)
●VESA mount
●VGA Input, with optional DVI, Video or S-Video input
●Supports wide-ranging resolutions from 640x480 to up to 1600x1200 with auto phase and auto
position
1.2 Specifications
Display
Model No.
APS9015
APS9017
APS9019
Display
15”
17”
19”
Luminance
400 cd/m²
380 cd/m²
450 cd/m²
Viewing Angle
140(H)x125(V)
170(H)x160(V)
170(H)x160(V)
Resolution
1024x768,
16.2Mcolors
1280x1024,
16.7M colors
1280x1024,
16.7M colors
Backlight
Lifetime
CCFLtube x 4
50,000hrs
CCFLtube x 4
50,000hrs
CCFLtube x 4
50,000hrs
Touch Screen
Resistive antiglare
Resistive antiglare
Resistive antiglare
OSD
Controls/Indicators
Automatic screen, setup (OSD), brightness, contrast, horizontal/verticalposition, image
lock, color balance, video information, power on and sync detected
OS Compatibility
Win 95/98, XP, 2000, NT 4.0, QNX, Linux
Power Input
DC 12V, Optional 11~32V/DC
Environment
Operating Temperature: 0~50˚C (32˚~122˚F)
Storage Temperature: -20~60˚C (-4˚~140˚F)
Relative Humidity: 10~90% @40˚C non-condensing, without touch screen
Vibration: 1g peak, 5~500Hz (at random)
Shock: 15G peak acceleration (11msec. duration)/operation
Ratings: Five edges panel NEMA 4/IP 65 rated
Certifications: Meet CE/FCC Class A
Model No.
APS9015
APS9017
APS9019
Construction
Stainless Steel chassis

Dimensions
398x53x316mm
(Wx Dx H / mm)
432x57.4x358
(Wx Dx H / mm)
470x60x388.6
(Wx Dx H / mm)
Mounting
VESA Mount
75x75
VESAMount
100x100

1.3 Dimensions
Figure 1.1: Dimensions of the APS9015

Figure 1.2 Dimensions of the APS9017

Figure 1.3: Dimensions of the APS9019

1.4 Brief Description
The APS901X features an excellent viewing ability for monitoring and control applications. It is
available with resistive touch screen that is easy to use and maintain.
The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is
panel-mounted in a NEMA rated cabinet or enclosure.
Figure 1.4: Front View of the APS901X
Figure 1.5: Rear View of the APS901X

1.5 Display Mode
Display Mode
Hori. Sync (KHz)
Vert. Sync. (Hz)
VGA 640 x 480
31
60
38
72
38
75
SVGA 800 x 600
35
56
38
60
48
72
47
75
XGA 1024 x 768
48
60
56
70
60
75
SXGA
1152 x 864
68
75
1280 x 1024
64
60
80
75

Chapter2
2.1 On Screen Display Controls
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
2.2 OSD Controls
To make any adjustment, select the following:
1. Press (Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item with the ( /or +/-) key.
4. Press (Menu) and then adjust the quality with the (
/ or +/-) key.

2.3 Main Menu
In the Position, there are the following:
z H. Position
z V. Position
z Back
For Image setting, check out the following:
z Clock
z Phase
z Gamma
z Sharpness
z Back
For Color, check out the following:
z Contrast
z Brightness
z ColorAdjust
z ColorTemp
z Back
In the Main menu, there are the following items:
z Color
z ImageSetting
z Position
z OSDMenu
z Language
z Misc
z Exit

In the Misc menu, there are:
z SignalSource
Select VGA: Analogue VGA Input
Select DVI: Digital DVI-D Input
Select AV: Composite Video Input
Select SV: S-Video Video Input
z Reset
z Back
In the Language menu, there are:
z
English
z Frances
z Germany
z Spanish
z TraditionalChinese
z SimplifiedChinese
z Japanese
In the OSD menu, there are:
z OSD H. Pos.
z OSD V. Pos.
z OSDTimer
z Back

Cable Not Connected
2.4 AD Board OSD Functions
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)
the buttons until the AC power cord is connected and the “RGB” appears on the top left
corner of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the button and don’t let them go) until the AC power cord is
connected. Please don’t let your fingers go until the AC power cord is connected again and the
wording of “RGB” appears on the top left corner of your screen, and wait for 3 second. Under the
non-signal entry situation, if is seen, exit is thus successfully made.
When the Burn-in Mode is Unable to Eradicate…
1.) If the “RGB”is still on the top left corner of the screen, press to enter “Miscellaneous” and
choose “Reset”, and then Yes, and press . When the screen goes black, disconnect power and
repeat the above steps.
2.) If the “RGB” is not found, disconnect the AC power cord first. Then press the buttons
(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When
“RGB” appears, repeat the above steps.
3.) Functions of OSD Keys
Auto Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator

Appendix
VESA Mounting
The APS901X display monitor can be VESA-mounted as an option. Just carefully mount the arm onto
the rear of the unit by fastening the given four screws as shown in Figure A.
Figure 1.6: VESA mounting of the APS901X