ACPro AWH18QE-D3DND6A/I User manual

AC Pro P-Series 30-42K
Service Manual
Models
AWH18QE-D3DND6A/I
AWH18YE-D3DNA1A/O
AWH24QE-D3DND6L/I
AWH24YE-D3DNA1A/O
(Refrigerant R410A)

We reserve the right to correct any clerical errors.
Copyright 2018 AC pro.

1Technical Information
1.FUNCTION AND CONTROL
6.1 REMOTE CONTROLLER INTRODUCTION
Buttons on Remote Controller
15
Technical Information
Service Manual
6. Function and Control
6.1 Remote Controller Introduction
1
2
3
4
5
6
7
8
9
10
11
12
button
button
X-FAN button
QUIET button
SLEEP button
TEMP button
I FEEL button
13
14
15
16
TURBO button
LIGHT button
button
TIMER ON/
TIMER OFF button
CLOCK button
1
2
3
4
ON/OFF button
FAN button
+/- button
MODE button
ON/OFF button
FAN button
+/- button
MODE button
/
1
3
1
13
5
4
3
7
9
6
8
12
14
11
2
4
16
15
10
2
1
(before opening cover (after opening cover
Send signal
Turbo mode
8ć(46 ) heating function
Set temperature
Set time
X-FAN function
TIMER ON /TIMER OFF
Child lock
Up & down swing
Left & right swing
Set fan speed
Light
Temp. display type
: Set temp.
: Outdoor ambient temp.
: Indoor ambient temp.
Sleep mode
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel
Healthy mode
Scavenging functions
Quiet
Ɖ
This is a general remote controller. Some
models have this function while some do
not. Please refer to the actual models.
Buttons on Remote Controller
Introduction for Icons on Display Screen
1
2
3
4
5
6
7
8
9
10
11
12
button
button
X-FAN button
QUIET button
SLEEP button
TEMP button
I FEEL button
13
14
15
16
TURBO button
LIGHT button
button
TIMER ON/
TIMER OFF button
CLOCK button
1
2
3
4
ON/OFF button
FAN button
+/- button
MODE button
ON/OFF button
FAN button
+/- button
MODE button
/
1
3
1
13
5
4
3
7
9
6
8
12
14
11
2
4
16
15
10
2
1
(before opening cover (after opening cover
Send signal
Turbo mode
8ć(46 ) heating function
Set temperature
Set time
X-FAN function
TIMER ON /TIMER OFF
Child lock
Up & down swing
Left & right swing
Set fan speed
Light
Temp. display type
: Set temp.
: Outdoor ambient temp.
: Indoor ambient temp.
Sleep mode
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel
Healthy mode
Scavenging functions
Quiet
Ɖ
This is a general remote controller. Some
models have this function while some do
not. Please refer to the actual models.
Introduction for Buttons on Remote Controller
Note:
● After putting through the power, the air conditioner will give out a sound.Operation indictor " " is ON (red indicator). After that, you can
operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon " " on the display of remote controller will blink once and
the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.
● Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off and light
functions are set, the corresponding icons will be displayed on the display of remote controller at the same time); Under on status, the
display will show the corresponding set function icons.
1. ON/OFF button
Press this button, the unit will be turned on, press it once more, the unit will be turned off. Sleep function will be canceled, while unit off.
Medium fanLow fan High fan
Medium-low fan Medium-high fan
ATUO
AUTO COOL DRY FAN HEAT
Medium fanLow fan High fan
Medium-low fan Medium-high fan
ATUO
AUTO COOL DRY FAN HEAT
Introduction for Buttons on Remote Controller Note:
After putting through the power, the air conditioner will give out a sound.Operation indictor “

16 Technical Information
Service Manual
2. FAN button
Press this button, Auto, Low, Medium-low, Medium, Medium-high, High speed can be circularly selected. After powered on, Auto fan speed
is default. Under DRY mode, Low fan speed only can be set up.
3. MODE button
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default while power on. Under Auto mode, the
temperature will not be displayed;Under Heat mode, the initial value is 28°C( 82°F);Under other modes, the initial value is 25°C(77°F).
4. +/- button
● Presetting temperature can be increased.
Press this button,the temperature can be set up, continuously press this button and hold for two seconds, the relative contents can quickly
change,until unhold this button and send the order that the °C(°F) signal will be displayed all the time.The temperature adjustment is
unavilable under the Auto mode, but the order can be sent by if pressing this button.Temperature of Celsius degree setting:16-30;for
Fahrenheit degree setting:61-86.
● Presetting temperature can be decreased.
Press this button, the temperature can be set up, continuously press this button and hold for two seconds, the relative contents can quickly
change,until unhold this button and send the order that the°C(°F) signal will be displayed all the time.The temperature adjustment is
unavailable under the Auto mode,but the order can be sent by if pressing this button.
5. TURBO button
Under Cool or Heat mode,press this button can turn on or turn off the Turbo function.After the Turbo function turned on, the signal of Turbo
will display. The signal will be automatically cancelled if changing the mode or fan speed.
6. button
Press this button to set left & right swing angle cycling as below:
7. button
Press this button to set swing angle,which circularly changes as below:
This remote controller is universal. If it receives threes kinds of following status,the swing angle will remain origial.
If guide louver is stopped when it is swinging up and down,it will remain its present position.
indicates guide louver swings back and forth in the ve places,as shown in the gure.
8. CLOCK button
Press this button, the clock can be set up,signal blink and display.Within 5 seconds, the value can be adjusted by pressing + or - button,
if continuously press this button for 2 seconds above,in every 0.5 seconds, the value on ten place of Minute will be increased 1.During
blinking,repress the Clock button or Conrm button,signal will be constantly displayed and it denotes the setting succeeded. After
powered on, 12:00 is defaulted to display and signal will be displayed. If there is signal be displayed that denotes the current time
value is Clock value, otherwise is Timer value.
9. TIMER ON/TIMER OFF button
● Timer On setting: Signal “ON”will blink and display,signal will conceal,the numerical section will become the timer on setting status.
During 5 seconds blink,by pressing + or - button to adjust the time value of numerical section,every press of that button,the value will be
increased or decreased 1 minute.Hold pressing + or - button,2 seconds later,it quickly change,the way of change is: During the initial 2.5
seconds,ten numbers change in the one place of minute,then the one place is constant,ten numbers change in the ten splace of minute at
2.5 seconds speed and carry. During 5s blink,press the Timer button,the timer setting succeeds.The Timer On has been set up,repress the
timer button,theTimer On will be canceled. Before setting theTimer,please adjust the Clock to the current actual time.
● One press this key to enter into TIMER OFF setup, in which case the TIMER OFF icon will blink. The method of setting is the sameas for
Technical Information
TIMER ON. 2
Note: It’s Low fan speed
under Dry mode.
(only for cooling and heating unit.
As for cooling only unit, it won’t
have any action when it receives
the signal of heating operation.)
Medium fanLow fan High fa
n
Medium-low fan Medium-high fan
ATUO
AUTO COOL DRY FAN HEAT
Medium fanLow fan High fan
Medium-low fan Medium-high fan
ATUO
AUTO COOL DRY FAN HEAT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OF
F
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF

3
Technical Information
17
Technical Information
Service Manual
10. TEMP button
Press this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on indoor unit’s
display. The setting on remote controller is selected circularly as below:
no display
When selecting " " with remote controller or no display, temperature indicator on indoor unit displays set temperature; When selecting
" " with remote controller,temperature indicator on indoor unit displays indoor ambient temperature; When selecting " " with remote
controller, temperature indicator on indoor unit displays outdoor ambient temperature. 3s later it will return to the setting temprature or it
depends on the other received signal within 3s.
Attention: When displaying the outdoor ambient, the displaying range is 32-99°F and 0-60°C.When it goes beyond the range, it keeps the
threshold data (the smallest—0°C or 32°F and the largest 99°F or 60°C).
Warm tips: When operating buttons on the cover please make sure the cover is closed completely.
11. / button(This function is only available for some models)
Press this button to achieve the on and off of healthy and scavenging functions in operation status.Press this button for the rst
time to start scavenging function;LCD displays“ ”.Press the button for the second time to start healthy and scavenging functions
simultaneously;LCD displays“ ”and “ ” .Press this button for the third time to quit healthy and scavenging functions simultaneously.
Press the button for the fourth time to start healthy function; LCD display“ ” .Press this button again to repeat the operation above.
12. I FEEL button
Press this button once, to turn on the I FEEL function, then the gure of "I FEEL" will be displayed, after every press of other function
button, every 200ms to send I FEEL once, after this function started,the remote control will send temperature to the main un it in every 10
minutes.When repress this button, this function will be turned off.
13. LIGHT button
Press this button at unit On or Off status,Light On and Light Off can be set up.After powered on, Light On is defaulted.
14. X-FAN button
Pressing X-FAN button in COOL or DRY mode,the icon is displayed and the indoor fan will continue operation for 2 minutes in order
to dry the indoor unit even though you have turned off the unit.After energization, X-FAN OFF is defaulted.X-FAN is not available in
AUTO,FAN or HEAT mode.
15. QUIET button
Press this button,the Quiet status is under the Auto Quiet mode (display" " and “Auto”signal ) and Quiet mode(display " " singal) and
Quiet OFF(there is no signal of " " displayed),after powered on,the Quiet OFF is defaulted. Under the Quiet mode (Display " "signal),
the fan speed is not available.
16. SLEEP button
●Press this button, can select Sleep 1 ( ), Sleep 2 ( ),Sleep 3 ( ) and cancel the Sleep, circulate between these, after
electried, Sleep Cancel is defaulted.
●Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for one hour, the main unit setting temperature will increase
1°C(1ºF~2ºF), 2 hours,setting temperature increased 2°C(3ºF~4ºF), the unit will run at this setting temperature; In Heat mode: sleep status
after run for one hour, the setting temperature will decrease 1°C(1ºF~2ºF), 2 hours, setting temperature will decrease 2°C(3ºF~4ºF), then
the unit will run at this setting temperature.
●Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep temperature curve.
In Cool mode:
(1) When setting the initial temperature 16~23°C(61ºF~74ºF), after turned on Sleep function, the temperature will be increased 1°C(1ºF~2ºF)
in every hour,after 3°C(5ºF~6ºF) the temperature will be maintained, after 7hours,the temperature will be decreased 1°C(1ºF~2ºF), after
that the unit will keep on running under this temperature;
(2) When setting the initial temperature 24~27°C(75ºF~81ºF), after turned on Sleep function, the temperature will be increased 1°C(1ºF~2ºF)
in every hour,after 2°C(3ºF~4ºF) the temperature will be maintained, after 7hours,the temperature will be decreased 1°C(1ºF~2ºF) , after
that the unit will keep on running under this temperature;
(3) When setting the initial temperature 28~29°C(82ºF~85ºF), after turned on Sleep function, the temperature will be increased 1°C(1ºF~2ºF)
in every hour, after 1°C(1ºF~2ºF) the temperature will be maintained, after 7hours,the temperature will be decreased 1°C(1ºF~2ºF) , after
that the unit will keep on running under this temperature;
(4) When setting the initial temperature 30°C(86ºF), under this temperature setting, after 7hours, the temperature will be decreased
1°C(1ºF~2ºF), after that the unit will keep on running under this temperature;
In Heat mode:
(1) Under the initial presetting temperature 16°C(61ºF), it will run under this setting temperature all along.
(2) Under the initial presetting temperature17~20°C(62ºF~68ºF), after Sleep function started up, the temperature will decrease 1°C(1ºF~2ºF)
in every hour, after 1°C(1ºF~2ºF) decreased, this temperature will be maintained.
(3) Under the initial presetting temperature 21~27°C(69ºF~81ºF), after Sleep function started up, the temperature will decrease
1°C(1ºF~2ºF) in every hour,after 2°C(3ºF~4ºF) decreased, this temperature will be maintained.
(4) Under the initial presetting temperature 28~30°C(82ºF~86ºF), after Sleep function started up, the temperature will decrease
1°C(1ºF~2ºF) in every hour, after 3°C(5ºF~6ºF) decreased, this temperature will be maintained.

4
17
Technical Information
Service Manual
10. TEMP button
Press this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on indoor unit’s
display. The setting on remote controller is selected circularly as below:
no display
When selecting " " with remote controller or no display, temperature indicator on indoor unit displays set temperature; When selecting
" " with remote controller,temperature indicator on indoor unit displays indoor ambient temperature; When selecting " " with remote
controller, temperature indicator on indoor unit displays outdoor ambient temperature. 3s later it will return to the setting temprature or it
depends on the other received signal within 3s.
Attention: When displaying the outdoor ambient, the displaying range is 32-99°F and 0-60°C.When it goes beyond the range, it keeps the
threshold data (the smallest—0°C or 32°F and the largest 99°F or 60°C).
Warm tips: When operating buttons on the cover please make sure the cover is closed completely.
11. / button(This function is only available for some models)
Press this button to achieve the on and off of healthy and scavenging functions in operation status.Press this button for the rst
time to start scavenging function;LCD displays“ ”.Press the button for the second time to start healthy and scavenging functions
simultaneously;LCD displays“ ”and “ ” .Press this button for the third time to quit healthy and scavenging functions simultaneously.
Press the button for the fourth time to start healthy function; LCD display“ ” .Press this button again to repeat the operation above.
12. I FEEL button
Press this button once, to turn on the I FEEL function, then the gure of "I FEEL" will be displayed, after every press of other function
button, every 200ms to send I FEEL once, after this function started,the remote control will send temperature to the main un it in every 10
minutes.When repress this button, this function will be turned off.
13. LIGHT button
Press this button at unit On or Off status,Light On and Light Off can be set up.After powered on, Light On is defaulted.
14. X-FAN button
Pressing X-FAN button in COOL or DRY mode,the icon is displayed and the indoor fan will continue operation for 2 minutes in order
to dry the indoor unit even though you have turned off the unit.After energization, X-FAN OFF is defaulted.X-FAN is not available in
AUTO,FAN or HEAT mode.
15. QUIET button
Press this button,the Quiet status is under the Auto Quiet mode (display" " and “Auto”signal ) and Quiet mode(display " " singal) and
Quiet OFF(there is no signal of " " displayed),after powered on,the Quiet OFF is defaulted. Under the Quiet mode (Display " "signal),
the fan speed is not available.
16. SLEEP button
●Press this button, can select Sleep 1 ( ), Sleep 2 ( ),Sleep 3 ( ) and cancel the Sleep, circulate between these, after
electried, Sleep Cancel is defaulted.
●Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for one hour, the main unit setting temperature will increase
1°C(1ºF~2ºF), 2 hours,setting temperature increased 2°C(3ºF~4ºF), the unit will run at this setting temperature; In Heat mode: sleep status
after run for one hour, the setting temperature will decrease 1°C(1ºF~2ºF), 2 hours, setting temperature will decrease 2°C(3ºF~4ºF), then
the unit will run at this setting temperature.
●Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep temperature curve.
In Cool mode:
(1) When setting the initial temperature 16~23°C(61ºF~74ºF), after turned on Sleep function, the temperature will be increased 1°C(1ºF~2ºF)
in every hour,after 3°C(5ºF~6ºF) the temperature will be maintained, after 7hours,the temperature will be decreased 1°C(1ºF~2ºF), after
that the unit will keep on running under this temperature;
(2) When setting the initial temperature 24~27°C(75ºF~81ºF), after turned on Sleep function, the temperature will be increased 1°C(1ºF~2ºF)
in every hour,after 2°C(3ºF~4ºF) the temperature will be maintained, after 7hours,the temperature will be decreased 1°C(1ºF~2ºF) , after
that the unit will keep on running under this temperature;
(3) When setting the initial temperature 28~29°C(82ºF~85ºF), after turned on Sleep function, the temperature will be increased 1°C(1ºF~2ºF)
in every hour, after 1°C(1ºF~2ºF) the temperature will be maintained, after 7hours,the temperature will be decreased 1°C(1ºF~2ºF) , after
that the unit will keep on running under this temperature;
(4) When setting the initial temperature 30°C(86ºF), under this temperature setting, after 7hours, the temperature will be decreased
1°C(1ºF~2ºF), after that the unit will keep on running under this temperature;
In Heat mode:
(1) Under the initial presetting temperature 16°C(61ºF), it will run under this setting temperature all along.
(2) Under the initial presetting temperature17~20°C(62ºF~68ºF), after Sleep function started up, the temperature will decrease 1°C(1ºF~2ºF)
in every hour, after 1°C(1ºF~2ºF) decreased, this temperature will be maintained.
(3) Under the initial presetting temperature 21~27°C(69ºF~81ºF), after Sleep function started up, the temperature will decrease
1°C(1ºF~2ºF) in every hour,after 2°C(3ºF~4ºF) decreased, this temperature will be maintained.
(4) Under the initial presetting temperature 28~30°C(82ºF~86ºF), after Sleep function started up, the temperature will decrease
1°C(1ºF~2ºF) in every hour, after 3°C(5ºF~6ºF) decreased, this temperature will be maintained.
18 Technical Information
Service Manual
●Sleep 3- the sleep curve setting under Sleep mode by DIY:
(1) Under Sleep 3 mode, press "Turbo" button for a long time, remote control enters into user individuation sleep setting status, at this
time, the time of remote control will display "1hour ", the setting temperature "88" will display the corresponding temperature of last setting
sleep curve and blink (The rst entering will display according to the initial curve setting value of original factory);
(2) Adjust "+" and "-" button, could change the corresponding setting temperature, after adjusted, press "Trubo "button for conrmation;
(3) At this time, 1hour will be automatically increased at the timer postion on the remote control, (that are "2hours" or "3hours" or "8hours "),
the place of setting temperature "88" will display the corresponding temperature of last setting sleep curve and blink;
(4) Repeat the above step (2)~(3) operation, until 8hours temperature setting nished, sleep curve setting nished, at this time, the remote
control will resume the original timer display;temperature display will resume to original setting temperature.
●Sleep3- the sleep curve setting under Sleep mode by DIY could be inquired:
The user could accord to sleep curve setting method to inquire the presetting sleep curve, enter into user individuation sleep setting
status, but do not change the temperature, press "Turbo" button directly for conrmation.
Note: In the above presetting or enquiry procedure, if continuously within10s, there is no button pressed, the sleep curve setting status will
be automatically quit and resume to display the original displaying. In the presetting or enquiry procedure, press "ON/OFF" button, "Mode"
button, "Timer" button or "Sleep" button, the sleep curve setting or enquiry status will quit similarly.
17. About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.
(1)Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for about 2 min. at
low speed. In this period, press X-FAN button to stop indoor fan directly.
(2)Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
18. About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room
temp. automatically to select the suitable running method and to make ambient comfortable.
19. About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the ambient temp. approachs the preset temp.
as soon as possible.
20. About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote controlleris locked, the icon will be displayed on it, in
which case, press any button, the mark will icker for three times. If the keyboard is unlocked, the mark will disappear.
21. About swing up and down
(1)Press swing up and down button continuously more than 2s,the main unit will swing back and forth from up to down, and then loosen
the button, the unit will stop swinging and present position of guide louver will be kept immediately.
(2)Under swing up and down mode, when the status is switched from off to
OFF
OFF
, if press this button again 2s later,
OFF
OFF
status will switch
to off status directly; if press this button again within 2s,the change of swing status will also depend on the circulation sequence stated
above.
22. About swing left and right
(1)Press swing left and right button continuously more than 2s,the main unit will swing back and forth from left to right, and then loosen the
button, the unit will stop swinging and present position of guide louver will be kept immediately.
(2)Under swing left and right mode, when the status is switched from off to
OFF
OFF
, if press this button again 2s later,
OFF
OFF
status will switch
to off status directly; if press this button again within 2s,the change of swing status will also depend on the circulation sequence stated
above.
23. About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch °C and °F.
24. Combination of " TEMP" and "CLOCK" buttons : About Energy-saving Function
Press “TEMP” and “CLOCK” simultaneously in COOL mode to start energy-saving function.Nixie tube on the remote controller displays “SE”.
Repeat the operation to quit the function.
25. Combination of " TEMP" and "CLOCK" buttons : About 8°C(46ºF) Heating Function
Press “TEMP” and “CLOCK” simultaneously in HEAT mode to start 8°C(46ºF) Heating Function.Nixie tube on the remote controller
displays" "and a selected temperature of “8°C” (46°F if Fahrenheit is adopted). Repeat the operation to quit the function.
26. About Auto Quiet function
When auto quiet function is selected:
(1)Under cooling mode: indoor fan operates at notch 4 speed. 10 minutes later or when indoor ambient temperature≤28°C(82ºF), indoor
fan will operate at notch 2 speed or quiet mode according to the comparison between indoor ambinet temperature and set temperature.
(2)Under heating mode: indoor fan operates at notch 3 speed or quiet mode according to the comparison between indoor ambient
temperature and set temperature.
(3)Under dry, fan mode: indoor fan operates at quiet mode.
(4)Under auto mode: the indoor fan operates at the auto quiet mode according to actual cooling, heating or fan mode.
27. About Sleep function
Under the Fan and Auto mode, the Sleep function cannot be set up, under Dehumidify mode, only Sleep 1 can be selected.Select and
enter into any kind of Sleep mode, the Quiet function will be attached and stared, different Quiet status could be optional and turned off.

5Technical Information
19
Technical Information
Service Manual
battery
Cover of battery box
remove
reinstall
1
4
3 1
2
4
2
3
5
battery
Cover of battery box
remove
reinstall
1
4
3 1
2
4
2
3
5
battery
Cover of battery box
remove
reinstall
1
4
3 1
2
4
2
3
5
Operation Guide
28.WIFI Function
Replacement of Batteries in Remote Controller
1. General operation
(1)After powered on, press ON/OFF button, the unit will start to run. (Note: When it is powered on, the
guide louver of main unit will close automatically.)
(2)Press MODE button, select desired running mode.
(3)Pressing + or - button, to set the desired temperature (It is unnecessary to set the temp. at AUTO
mode.)
(4)Pressing FAN button, set fan speed, can select AUTO FAN,LOW, MEDIUM-LOW, MEDIUM, MEDIUM-
HIGH and HIGH.
(5)Pressing and button, to select the swing.
2. Optional operation
(1)Press SLEEP button, to set sleep.
(2)Press TIMER ON and TIMER OFF button, can set the scheduled timer on or timer off.
(3)Press LIGHT button, to control the on and off of the displaying part of the unit (This function may be not
available for some units).
(4)Press TURBO button, can realize the ON and OFF of TURBO function.
1. Press the back side of remote controller marked with " ",as shown in the g,and then push out the
cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar are
correct.
3. Reinstall the cover of battery box.
Note:
● During operation, point the remote control signal sender at the receiving window on indoor unit.
● The distance between signal sender and receiving window should be no more than 8m, and there
should be no obstacles between them.
● Signal may be interfered easily in the room where there is uorescent lamp or wireless telephone;
remote controller should be close to indoor unit during operation.
● Replace new batteries of the same model when replacement is required.
● When you don’t use remote controller for a long time, please take out the batteries.
● If the display on remote controller is fuzzy or there’s no display, please replace batteries.
Press "MODE" and "TURBO" button simultaneously to turn on or turn off WIFI function. When WIFI function is turned on, the
" " icon will be displayed on remote controller; Long press "MODE" and "TURBO" buttons simultaneously for 10s, remote
controller will send WIFI reset code and then the WIFI function will be turned on. WIFI function is defaulted ON after energization
of the remote controller.(This function only applicable for some models. )

6
1.2 GREE +APP OPERATION MANUAL
For the ultimate in convenience, selected AC Pro Heat Pump and Air Conditioner models feature a
built-in intelligent WiFi capability and GREE+ SmartPhone app. This allows you to operate the unit
through your smartphone anywhere a WIFI network can be found. The GREE+ app is compatible with
devices using standard Android or iOS operating systems.
Download the Gree + app directly to your phone from the
Apple Store or Google Play Store. When the GREE+ app has
successfully downloaded to your phone, close the Apple Store or
Google Play Store app.
iOS System supports iOS 7.0 and above.
Android System supports Android 4.0 and above.
Remote Controls with a “WIFI” button: turn ON the Gree system. Press
and hold the “WIFI” button for 1 second until the unit beeps for the
second time and the WIFI icon appears on the display. Repeat the
procedure to turn WIFI mode OFF.
Remote controls without a “WIFI” button: press and hold both the
“Mode” and “Turbo” buttons for 10 seconds until the unit beeps for the
second time and the WIFI icon appears on the display. Repeat the
procedure to turn WIFI mode OFF.
Control the comfort - With your smartphone!
Operating System Requirements for Your Smartphone
Adding the Gree + App to Your Phone
Registering your AC Pro Unit to Wifi System
Step 1: Turn on the Units wifi interface
For the ultimate in convenience, selected Gree Heat Pump and Air Conditioner models feature a built-in intelligent
WIFI capability and GREE+ SmartPhone app.This allows you to operate the unit through your smartphone anywhere a
WIFI network can be found.The GREE+ app is compatible with devices using standard Android or iOS operating systems.
Operating System Requirements for your smartphone:
iOS System supports iOS 7.0 and above.
Android System supports Android 4.0 and above.
Adding the GREE+ app to your phone.
STEP 1.
SELECT AND DOWNLOAD THE GREE+ app.
Scan QR code at right to open the GREE+ app selection page.
From the GREE+ app selection page, choose either the Apple
Store for iOS or Google Play Store for Android Operating Systems
to download the GREE+ app to your phone.
STEP 2.
ADD THE APP TO YOUR PHONE.
Download the GREE+ app directly to your phone from the
Apple Store or Google Play Store. When the GREE+ app has
successfully downloaded to your phone, CLOSE the Apple Store or
Google Play Store app.
Control the comfort – with your smartphone!
SMARTPHONE CONTROLS
Get GREE + App
Apple Store
Operating System
Selection Page
Google Play Store
2
For the ultimate in convenience, selected Gree Heat Pump and Air Conditioner models feature a built-in intelligent
WIFI capability and GREE+ SmartPhone app.This allows you to operate the unit through your smartphone anywhere a
WIFI network can be found.The GREE+ app is compatible with devices using standard Android or iOS operating systems.
Operating System Requirements for your smartphone:
iOS System supports iOS 7.0 and above.
Android System supports Android 4.0 and above.
Adding the GREE+ app to your phone.
STEP 1.
SELECT AND DOWNLOAD THE GREE+ app.
Scan QR code at right to open the GREE+ app selection page.
From the GREE+ app selection page, choose either the Apple
Store for iOS or Google Play Store for Android Operating Systems
to download the GREE+ app to your phone.
STEP 2.
ADD THE APP TO YOUR PHONE.
Download the GREE+ app directly to your phone from the
Apple Store or Google Play Store. When the GREE+ app has
successfully downloaded to your phone, CLOSE the Apple Store or
Google Play Store app.
Control the comfort – with your smartphone!
SMARTPHONE CONTROLS
Get GREE + App
Apple Store
Operating System
Selection Page
Google Play Store
2
For the ultimate in convenience, selected Gree Heat Pump and Air Conditioner models feature a built-in intelligent
WIFI capability and GREE+ SmartPhone app.This allows you to operate the unit through your smartphone anywhere a
WIFI network can be found.The GREE+ app is compatible with devices using standard Android or iOS operating systems.
Operating System Requirements for your smartphone:
iOS System supports iOS 7.0 and above.
Android System supports Android 4.0 and above.
Adding the GREE+ app to your phone.
STEP 1.
SELECT AND DOWNLOAD THE GREE+ app.
Scan QR code at right to open the GREE+ app selection page.
From the GREE+ app selection page, choose either the Apple
Store for iOS or Google Play Store for Android Operating Systems
to download the GREE+ app to your phone.
STEP 2.
ADD THE APP TO YOUR PHONE.
Download the GREE+ app directly to your phone from the
Apple Store or Google Play Store. When the GREE+ app has
successfully downloaded to your phone, CLOSE the Apple Store or
Google Play Store app.
Control the comfort – with your smartphone!
SMARTPHONE CONTROLS
Get GREE + App
Apple Store
Operating System
Selection Page
Google Play Store
2
STEP 1.
TURN ON THE UNIT’S WIFI INTERFACE.
Remote Controls with a “WIFI” button: turn ON the Gree system. Press and hold the “WIFI”
button for 10 seconds until the unit beeps for the second time and the WIFI icon appears
on the display. Repeat the procedure to turn WIFI mode OFF.
Remote controls without a “WIFI” button: press and hold both the “Mode” and “Turbo”
buttons for 10 seconds until the unit beeps for the second time and the WIFI icon
appears on the display. Repeat the procedure to turn WIFI mode OFF.
Registering your Gree unit on the Gree Universal WIFI System.
SMARTPHONE CONTROLS
3
Remote with WIFI button
Remote without WIFI button
STEP 1.
TURN ON THE UNIT’S WIFI INTERFACE.
Remote Controls with a “WIFI” button: turn ON the Gree system. Press and hold the “WIFI”
button for 10 seconds until the unit beeps for the second time and the WIFI icon appears
on the display. Repeat the procedure to turn WIFI mode OFF.
Remote controls without a “WIFI” button: press and hold both the “Mode” and “Turbo”
buttons for 10 seconds until the unit beeps for the second time and the WIFI icon
appears on the display. Repeat the procedure to turn WIFI mode OFF.
Registering your Gree unit on the Gree Universal WIFI System.
SMARTPHONE CONTROLS
3
Remote with WIFI button
Remote without WIFI button

7Technical Information
Locate the GREE+ icon on your phone.Tap the icon to launch the app.
The GREE+ Login screen will be displayed.
For first-time users, select the “Sign Up” button to create an
account and register your AC Pro unit on the WIFI System.
On the Sign Up screen, you should
-Create a User Name
-Enter your email address
-Create a password
-Select region (i.e., North America)
Then tap “Sign Up” button.
For future reference, record the user name, email address and password used to set up your account.
User Name: _________________________________________________________________________________
Email Address: _______________________________________________________________________________
Password: ___________________________________________________________________________________
Step 2: Launch the GREE+ app on your smartphone.
Step 3: Sign up for Gree Universal WIFI access.
STEP 2.
LAUNCh ThE GREE+ APP ON YOUR SMARTPhONE.
Locate the GREE+ icon on your phone. Tap the icon to launch the app.
STEP 3.
SIGN UP FOR GREE UNIVERSAL WIFI ACCESS.
The GREE+ Login screen will be displayed.
For first-time users, select the “Sign Up” button to create an
account and register your Gree unit on the Gree Universal
WIFI System.
On the Sign Up screen, you should
-Create a User Name
-Enter your email address
-Create a password
-Select region (i.e., North America)
Then tap “Sign Up” button.
SMARTPhONE CONTROLS
4
For future reference, record the user name, email address and password used to set up your account.
User Name: _________________________________________________________________________________
Email Address: _______________________________________________________________________________
Password: ___________________________________________________________________________________
Login Screen 1st Time Sign Up Screen

8
The GREE+ Login screen will be displayed.
This is the local WIFI network the AC Pro unit will be connected to and
communicating through. From the My Home screen, tap the “+”
button to add your WIFI network. Select your home or office WIFI
network and enter the WIFI network password. If you want GREE+
to remember your network password, check the box (optional).
Tap the “Search for Device” button.
GREE+ will search your WIFI network for AC Pro units.
When a AC Pro unit is found, it will automatically be registered on
the WIFI system. GREE+ will display the device
name (ex., AC5bcf) of your AC Pro unit.
Tap the back “<” button to return to the My Home screen.
Your unit will be displayed on the My Home screen.
Turn your unit “ON” and “OFF” by tapping the
circle button.
For a full screen display, tap the unit display.
Step 4: Add yourWIFI network to the GREE+ app.
Step 5: Add your AC Pro unit to the GREE+ app.
Step 6: Return to the Home Screen
STEP 6.
RETURNING TO ThE hOME SCREEN.
Tap the back “<” button to return to the My Home screen.
Your Gree unit will be displayed on the My Home screen.
Turn your Gree unit “ON” and “OFF” by tapping the
circle button.
For a full screen display, tap the Gree unit display.
STEP 4.
ADD YOUR WIFI NETWORk TO ThE GREE+ APP.
This is the local WIFI network the Gree unit will be connected to and
communicating through. From the My Home screen, tap the “+”
button to add your WIFI network. Select your home or office WIFI
network and enter the WIFI network password. If you want GREE+
to remember your network password, check the box (optional).
Tap the “Search for Device” button.
STEP 5.
ADD YOUR GREE UNIT TO ThE GREE+ APP.
GREE+ will search your WIFI network for Gree units.
When a Gree unit is found, it will automatically be registered on
the Gree Universal WIFI system. GREE+ will display the device
name (ex., AC5bcf) of your Gree unit.
WIFI Network Screen
Registration Confirmation
Screen
SMARTPhONE CONTROLS
5
Unit “OFF” My Home Screen Unit “ON” Full ScreenUnit “ON” My Home Screen
STEP 6.
RETURNING TO ThE hOME SCREEN.
Tap the back “<” button to return to the My Home screen.
Your Gree unit will be displayed on the My Home screen.
Turn your Gree unit “ON” and “OFF” by tapping the
circle button.
For a full screen display, tap the Gree unit display.
STEP 4.
ADD YOUR WIFI NETWORk TO ThE GREE+ APP.
This is the local WIFI network the Gree unit will be connected to and
communicating through. From the My Home screen, tap the “+”
button to add your WIFI network. Select your home or office WIFI
network and enter the WIFI network password. If you want GREE+
to remember your network password, check the box (optional).
Tap the “Search for Device” button.
STEP 5.
ADD YOUR GREE UNIT TO ThE GREE+ APP.
GREE+ will search your WIFI network for Gree units.
When a Gree unit is found, it will automatically be registered on
the Gree Universal WIFI system. GREE+ will display the device
name (ex., AC5bcf) of your Gree unit.
WIFI Network Screen
Registration Confirmation
Screen
SMARTPhONE CONTROLS
5
Unit “OFF” My Home Screen Unit “ON” Full ScreenUnit “ON” My Home Screen
STEP 6.
RETURNING TO ThE hOME SCREEN.
Tap the back “<” button to return to the My Home screen.
Your Gree unit will be displayed on the My Home screen.
Turn your Gree unit “ON” and “OFF” by tapping the
circle button.
For a full screen display, tap the Gree unit display.
STEP 4.
ADD YOUR WIFI NETWORk TO ThE GREE+ APP.
This is the local WIFI network the Gree unit will be connected to and
communicating through. From the My Home screen, tap the “+”
button to add your WIFI network. Select your home or office WIFI
network and enter the WIFI network password. If you want GREE+
to remember your network password, check the box (optional).
Tap the “Search for Device” button.
STEP 5.
ADD YOUR GREE UNIT TO ThE GREE+ APP.
GREE+ will search your WIFI network for Gree units.
When a Gree unit is found, it will automatically be registered on
the Gree Universal WIFI system. GREE+ will display the device
name (ex., AC5bcf) of your Gree unit.
WIFI Network Screen
Registration Confirmation
Screen
SMARTPhONE CONTROLS
5
Unit “OFF” My Home Screen Unit “ON” Full ScreenUnit “ON” My Home Screen
STEP 6.
RETURNING TO ThE hOME SCREEN.
Tap the back “<” button to return to the My Home screen.
Your Gree unit will be displayed on the My Home screen.
Turn your Gree unit “ON” and “OFF” by tapping the
circle button.
For a full screen display, tap the Gree unit display.
STEP 4.
ADD YOUR WIFI NETWORk TO ThE GREE+ APP.
This is the local WIFI network the Gree unit will be connected to and
communicating through. From the My Home screen, tap the “+”
button to add your WIFI network. Select your home or office WIFI
network and enter the WIFI network password. If you want GREE+
to remember your network password, check the box (optional).
Tap the “Search for Device” button.
STEP 5.
ADD YOUR GREE UNIT TO ThE GREE+ APP.
GREE+ will search your WIFI network for Gree units.
When a Gree unit is found, it will automatically be registered on
the Gree Universal WIFI system. GREE+ will display the device
name (ex., AC5bcf) of your Gree unit.
WIFI Network Screen
Registration Confirmation
Screen
SMARTPhONE CONTROLS
5
Unit “OFF” My Home Screen Unit “ON” Full ScreenUnit “ON” My Home Screen

9Technical Information
Tap the “Settings” button to open the settings screen.
From the settings screen, you can customize the unit
name, lock the device and check your version of Firmware.
Set a custom name for your Gree unit for easy and quick
identification (ex., Living Room, Den, Bedroom).To change the
device name, tap on the current device name and then type
in a new name.
Privacy Lock Mode prevents unauthorized access to the unit
controls and prevents unauthorized users from tampering with
system settings.Turn Lock on and off by sliding the Device Lock
button to the right or left to lock or unlock.
Repeat the “Registering your AC Pro unit on the WIFI System” section
above for each new device.
Tap the “Save” button.
Tap the “<” button to return to this screen.
Customize the GREE+ app on your smartphone.
Step 1: Settings
Step 2: Customize
Step 3: Turn On/Off Privacy Lock Mode
Add up to four units to the GREE+ app on your smartphone.
Step 4: Return to Full Screen Display.
Step 5: Return to my home screen.
STARTUP AND OPERATION
Settings Screen
Customize the GREE+ app on your smartphone.
STEP 1.
SETTINGS
Tap the “Settings” button to open the settings screen.
From the settings screen, you can customize the Gree unit
name, lock the device and check your version of Firmware.
STEP 2.
CUSTOMIZE
Set a custom name for your Gree unit for easy and quick
identification (ex., Living Room, Den, Bedroom). To change the
device name, tap on the current device name and then type
in a new name.
STEP 3.
TURN ON/OFF PRIVACY LOCK MODE.
Privacy Lock Mode prevents unauthorized access to the unit
controls and prevents unauthorized users from tampering with
system settings. Turn Lock on and off by sliding the Device Lock
button to the right or left to lock or unlock.
STEP 4.
RETURN TO FULL SCREEN DISPLAY.
Tap the “Save” button.
STEP 5.
RETURN TO MY HOME SCREEN.
Tap the “<” button to return to this screen.
Home Screen
6
STARTUP AND OPERATION
Settings Screen
Customize the GREE+ app on your smartphone.
STEP 1.
SETTINGS
Tap the “Settings” button to open the settings screen.
From the settings screen, you can customize the Gree unit
name, lock the device and check your version of Firmware.
STEP 2.
CUSTOMIZE
Set a custom name for your Gree unit for easy and quick
identification (ex., Living Room, Den, Bedroom). To change the
device name, tap on the current device name and then type
in a new name.
STEP 3.
TURN ON/OFF PRIVACY LOCK MODE.
Privacy Lock Mode prevents unauthorized access to the unit
controls and prevents unauthorized users from tampering with
system settings. Turn Lock on and off by sliding the Device Lock
button to the right or left to lock or unlock.
STEP 4.
RETURN TO FULL SCREEN DISPLAY.
Tap the “Save” button.
STEP 5.
RETURN TO MY HOME SCREEN.
Tap the “<” button to return to this screen.
Home Screen
6
Single Unit Screen
Add up to four Gree units to the GREE+ app on your smartphone.
Repeat the “Registering your Gree unit on the Gree Universal WIFI System” section
above for each new device.
STARTUP AND OPERATION
7
72°F
68°F
Multiple Units Screen
Single Unit Screen
Add up to four Gree units to the GREE+ app on your smartphone.
Repeat the “Registering your Gree unit on the Gree Universal WIFI System” section
above for each new device.
STARTUP AND OPERATION
7
72°F
68°F
Multiple Units Screen

10
Select “Auto”, “Cool”, “Dry”, “Fan” or “Heat” by sliding the
mode icon right or left on the smartphone display. The modes
will be displayed as follows:
Room temperature setting can be adjusted between 61°F to
86°F by scrolling to the room temperature icon right or left
on the smartphone display.
See Remote Controller instructions for detailed operation of
these modes.
OPERATING MODE
ADJUSTTEMPERATURE SETTING
STARTUP AND OPERATION
8
72°F
68°F
ADJUST TEMPERATURE SETTING
Room temperature setting can be adjusted between 61°F to
86°F by scrolling to the room temperature icon right or left
on the smartphone display.
Cool Mode
Temperature Setting
OPERATING MODE
Select “Auto”, “Cool”, “Dry”, “Fan” or “Heat” by sliding the
mode icon right or left on the smartphone display.The modes
will be displayed as follows:
See Remote Controller instructions for detailed operation of
these modes.
Heat Mode
STARTUP AND OPERATION
8
72°F
68°F
ADJUST TEMPERATURE SETTING
Room temperature setting can be adjusted between 61°F to
86°F by scrolling to the room temperature icon right or left
on the smartphone display.
Cool Mode
Temperature Setting
OPERATING MODE
Select “Auto”, “Cool”, “Dry”, “Fan” or “Heat” by sliding the
mode icon right or left on the smartphone display.The modes
will be displayed as follows:
See Remote Controller instructions for detailed operation of
these modes.
Heat Mode

11 Technical Information
Initially, the GREE+ app will display temperatures in °F.
To switch the display to °C, tap the °F icon on the smartphone
Screen. Repeat the procedure to switch the display back to °F.
Fan mode can be adjusted by sliding the fan icon right or left on the
smartphone screen.The fan modes will be displayed as follows:
See Remote Controller instructions for detailed operation
FAHRENHEIT °F/CELSIUS °C SCREEN
Fan Modes
FAN MODES
Fan mode can be adjusted by sliding the fan icon right or left on the
smartphone screen.The fan modes will be displayed as follows:
See Remote Controller instructions for detailed operation.
Fan Mode Screens
STARTUP AND OPERATION
9
FAhRENhEIT °F/CELSIUS °C SCREEN
Initially, the GREE+ app will display temperatures in °F.
To switch the display to °C, tap the °F icon on the smartphone
Screen.Repeat the procedure to switch the display back to °F.
Fahrenheit °F/Celcius °C Screen
FAN MODES
Fan mode can be adjusted by sliding the fan icon right or left on the
smartphone screen.The fan modes will be displayed as follows:
See Remote Controller instructions for detailed operation.
Fan Mode Screens
STARTUP AND OPERATION
9
FAhRENhEIT °F/CELSIUS °C SCREEN
Initially, the GREE+ app will display temperatures in °F.
To switch the display to °C, tap the °F icon on the smartphone
Screen.Repeat the procedure to switch the display back to °F.
Fahrenheit °F/Celcius °C Screen
FAN MODES
Fan mode can be adjusted by sliding the fan icon right or left on the
smartphone screen.The fan modes will be displayed as follows:
See Remote Controller instructions for detailed operation.
Fan Mode Screens
STARTUP AND OPERATION
9
FAhRENhEIT °F/CELSIUS °C SCREEN
Initially, the GREE+ app will display temperatures in °F.
To switch the display to °C, tap the °F icon on the smartphone
Screen.Repeat the procedure to switch the display back to °F.
Fahrenheit °F/Celcius °C Screen

12
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
When operating in humid areas, the unit has a DRY COIL function
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature on by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn off.
This function is not included with your system.
OPEN SPECIAL FUNCTIONS
X-FAN MODE
Ventilate
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions

13 Technical Information
Turn the indoor unit display on by tapping the “Function”
button and then the “Light” button.Tap again to turn it back off.
Energy Saving mode will automatically select the optimal compressor
and fan speeds to allow for energy savings while operating in Cooling
or Heating modes. The compressor and fan will automatically slow
down as the room temperature reaches the set point. Turn the Energy
Saving on and off by tapping the “Function” button and then
the “SE” $ button.
Freeze Guard mode (or vacation mode) will automatically
maintain room temperature above 46°F. Turn Freeze Guard on
and off by tapping the “Function” button and then the “46°F”
heating button. Freeze Guard can only be activated in heat mode.
UNIT DISPLAY LIGHT ON/OFF
ENERGY SAVING MODE
FREEZE GUARD (46°F Heating)
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
UNIT DISPLAY LIGhT ON/OFF
Turn the indoor unit display ON by tapping the “Function”
button and then the “Light” button.Tap again to turn it back OFF.
Unit Screen Control
Energy Saving Mode
SPECIAL FUNCTION GROUP
FREEzE GUARD (46°F hEATING)
Freeze Guard mode (or vacation mode) will automatically
maintain room temperature above 46°F.Turn Freeze Guard ON
and OFF by tapping the “Function” button and then the “46°F”
heating button.Freeze Guard can only be activated in heat mode.
Freeze Guard Mode
12
°F
ENERGY SAVING MODE
Energy Saving mode will automatically select the optimal compressor
and fan speeds to allow for energy savings while operating in Cooling
or Heating modes.The compressor and fan will automatically slow
down as the room temperature reaches the set point.Turn the Energy
Saving ON and OFF by tapping the “Function” button and then
the “SE” button.
$
Unit Screen OFF Unit Screen ON
UNIT DISPLAY LIGhT ON/OFF
Turn the indoor unit display ON by tapping the “Function”
button and then the “Light” button.Tap again to turn it back OFF.
Unit Screen Control
Energy Saving Mode
SPECIAL FUNCTION GROUP
FREEzE GUARD (46°F hEATING)
Freeze Guard mode (or vacation mode) will automatically
maintain room temperature above 46°F.Turn Freeze Guard ON
and OFF by tapping the “Function” button and then the “46°F”
heating button.Freeze Guard can only be activated in heat mode.
Freeze Guard Mode
12
°F
ENERGY SAVING MODE
Energy Saving mode will automatically select the optimal compressor
and fan speeds to allow for energy savings while operating in Cooling
or Heating modes.The compressor and fan will automatically slow
down as the room temperature reaches the set point.Turn the Energy
Saving ON and OFF by tapping the “Function” button and then
the “SE” button.
$
Unit Screen OFF Unit Screen ON
UNIT DISPLAY LIGhT ON/OFF
Turn the indoor unit display ON by tapping the “Function”
button and then the “Light” button.Tap again to turn it back OFF.
Unit Screen Control
Energy Saving Mode
SPECIAL FUNCTION GROUP
FREEzE GUARD (46°F hEATING)
Freeze Guard mode (or vacation mode) will automatically
maintain room temperature above 46°F.Turn Freeze Guard ON
and OFF by tapping the “Function” button and then the “46°F”
heating button.Freeze Guard can only be activated in heat mode.
Freeze Guard Mode
12
°F
ENERGY SAVING MODE
Energy Saving mode will automatically select the optimal compressor
and fan speeds to allow for energy savings while operating in Cooling
or Heating modes.The compressor and fan will automatically slow
down as the room temperature reaches the set point.Turn the Energy
Saving ON and OFF by tapping the “Function” button and then
the “SE” button.
$
Unit Screen OFF Unit Screen ON
UNIT DISPLAY LIGhT ON/OFF
Turn the indoor unit display ON by tapping the “Function”
button and then the “Light” button.Tap again to turn it back OFF.
Unit Screen Control
Energy Saving Mode
SPECIAL FUNCTION GROUP
FREEzE GUARD (46°F hEATING)
Freeze Guard mode (or vacation mode) will automatically
maintain room temperature above 46°F.Turn Freeze Guard ON
and OFF by tapping the “Function” button and then the “46°F”
heating button.Freeze Guard can only be activated in heat mode.
Freeze Guard Mode
12
°F
ENERGY SAVING MODE
Energy Saving mode will automatically select the optimal compressor
and fan speeds to allow for energy savings while operating in Cooling
or Heating modes.The compressor and fan will automatically slow
down as the room temperature reaches the set point.Turn the Energy
Saving ON and OFF by tapping the “Function” button and then
the “SE” button.
$
Unit Screen OFF Unit Screen ON

14
Turn the Vertical (Up & Down) Swing Louvers on and off by tapping the
“Function” button and then the “Vertical Swing Louver” button.
To adjust the discharge air direction, tap on the Up & Down button under
the icon to bring up the Swing Louver Setting screen.Then, tap the
desired vertical air discharge direction.
Sleep mode will automatically adjust room temperature during your
sleep time.This slight change in temperature will not affect your
comfort level due to the natural effects that sleeping has on the body,
but it will save on energy consumption and lower your electric bill.
For more information, see Sleep Modes in the remote controller
instructions.Turn Sleep Mode ON and OFF by tapping the “Function”
button and then the “Sleep” Button
VERTICAL SWING LOUVERS
SLEEP MODE
Note: Multiple air directions can be selected by sliding across the screen icons
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
SPECIAL FUNCTION GROUP
VERTICAL SWING LOUVERS
Turn the Vertical (Up & Down) Swing Louvers ON and OFF by tapping the “Function”
button and then the “Vertical Swing Louver” button.
To adjust the discharge air direction, tap on the Up & Down button under the icon to bring up
the Swing Louver Setting screen.Then, tap the desired vertical air discharge direction.
NOTE: Multiple air directions can be selected by sliding across the screen icons.
Vertical Swing Louvers
13
SPECIAL FUNCTION GROUP
VERTICAL SWING LOUVERS
Turn the Vertical (Up & Down) Swing Louvers ON and OFF by tapping the “Function”
button and then the “Vertical Swing Louver” button.
To adjust the discharge air direction, tap on the Up & Down button under the icon to bring up
the Swing Louver Setting screen.Then, tap the desired vertical air discharge direction.
NOTE: Multiple air directions can be selected by sliding across the screen icons.
Vertical Swing Louvers
13
SLEEP MODE
Sleep mode will automatically adjust room temperature during your
sleep time.This slight change in temperature will not affect your
comfort level due to the natural effects that sleeping has on the body,
but it will save on energy consumption and lower your electric bill.
For more information, see Sleep Modes in the remote controller
instructions.Turn Sleep Mode ON and OFF by tapping the “Function”
button and then the “Sleep” Button
Sleep Mode
SPECIAL FUNCTION GROUP
15

15 Technical Information
The Gree unit contains between 1 to 4 different Sleep mode functions depending on the model.To
select a Sleep Mode, tap the “Sleep” title under the Sleep icon to open the Sleep Setting screen.
From the Sleep Setting screen, you can select a desired sleep function. You can select the Expert,
Nap,Tradition or DIY Sleep functions by tapping the buttons at the bottom of the screen.
SLEEP MODE SETTINGS
SLEEP MODE
Sleep mode will automatically adjust room temperature during your
sleep time.This slight change in temperature will not affect your
comfort level due to the natural effects that sleeping has on the body,
but it will save on energy consumption and lower your electric bill.
For more information, see Sleep Modes in the remote controller
instructions.Turn Sleep Mode ON and OFF by tapping the “Function”
button and then the “Sleep” Button
Sleep Mode
SPECIAL FUNCTION GROUP
15
SPECIAL FUNCTION GROUP
16
SLEEP MODE SETTINGS
The Gree unit contains between 1 to 4 different Sleep mode functions depending on the model.To select
a Sleep Mode, tap the “Sleep” title under the Sleep icon to open the Sleep Setting screen.
From the Sleep Setting screen, you can select a desired sleep function.You can select the Expert, Nap,
Tradition or DIY Sleep functions by tapping the buttons at the bottom of the screen.
Sleep Setting Screen
SPECIAL FUNCTION GROUP
16
SLEEP MODE SETTINGS
The Gree unit contains between 1 to 4 different Sleep mode functions depending on the model.To select
a Sleep Mode, tap the “Sleep” title under the Sleep icon to open the Sleep Setting screen.
From the Sleep Setting screen, you can select a desired sleep function.You can select the Expert, Nap,
Tradition or DIY Sleep functions by tapping the buttons at the bottom of the screen.
Sleep Setting Screen

16
SPECIAL FUNCTION GROUP
18
TRADITION SLEEP MODE
DIY SLEEP MODE
DIY Sleep Mode Screen
Tradition Sleep Mode Screen
SPECIAL FUNCTION GROUP
18
TRADITION SLEEP MODE
DIY SLEEP MODE
DIY Sleep Mode Screen
Tradition Sleep Mode Screen
SPECIAL FUNCTION GROUP
17
EXPERT SLEEP MODE
NAP SLEEP MODE
Nap Sleep Mode Screen
Expert Sleep Mode Screen
EXPERT SLEEP MODE TRADITION SLEEP MODE
NAP SLEEP MODE DIY SLEEP MODE

17 Technical Information
Timer mode will automatically turn the unit ON or OFF on a selected day and time to save on energy
consumption and lower your electric bill.
Program Timer Mode by tapping the “Function” button and then the “Timer” button.This
will bring up the Preset List screen.The Preset List will be empty the first time using Timer Mode.
Afterwards, this screen will be a quick reference to the daily Timer program.To create a Timer program,
tap the “Plus Sign” button at the bottom of the screen to launch the Add Preset screen.
TIMER MODE
SPECIAL FUNCTION GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage.Tap the “Function”
icon to open the Special Function window.
VENTILATE
This function is not included with your system.
Ventilate Mode
X-FAN MODE
When operating in humid areas, the unit has a DRY COILfunction
called X-Fan.This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil.Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button.Tap again to turn OFF.
X-Fan Mode
10
Special Functions
TIMER MODE
Timer mode will automatically turn the unit ON or OFF on a selected day and time to save on energy consumption and
lower your electric bill.
Program Timer Mode by tapping the “Function” button and then the “Timer” button.This will bring up the
Preset List screen.The Preset List will be empty the first time using Timer Mode.Afterwards, this screen will be a quick
reference to the daily Timer program.To create a Timer program, tap the “Plus Sign” button at the bottom of the
screen to launch the Add Preset screen.
SPECIAL FUNCTION GROUP
19
Need
ImaGe
TIMER MODE
Timer mode will automatically turn the unit ON or OFF on a selected day and time to save on energy consumption and
lower your electric bill.
Program Timer Mode by tapping the “Function” button and then the “Timer” button.This will bring up the
Preset List screen.The Preset List will be empty the first time using Timer Mode.Afterwards, this screen will be a quick
reference to the daily Timer program.To create a Timer program, tap the “Plus Sign” button at the bottom of the
screen to launch the Add Preset screen.
SPECIAL FUNCTION GROUP
19
Need
ImaGe
TIMER MODE
Timer mode will automatically turn the unit ON or OFF on a selected day and time to save on energy consumption and
lower your electric bill.
Program Timer Mode by tapping the “Function” button and then the “Timer” button.This will bring up the
Preset List screen.The Preset List will be empty the first time using Timer Mode.Afterwards, this screen will be a quick
reference to the daily Timer program.To create a Timer program, tap the “Plus Sign” button at the bottom of the
screen to launch the Add Preset screen.
SPECIAL FUNCTION GROUP
19
Need
ImaGe

18
In the Add Preset screen, the unit can be programmed to turn ON and OFF on specific days of the week
and time of day.
Select the specific days of the week the unit will turn ON or OFF by tapping the buttons at the bottom of
the screen.
In the Add Preset screen, the unit can be programmed to turn ON and OFF on specific days of the week and time of day.
Select the specific days of the week the unit will turn ON or OFF by tapping the buttons at the bottom of the screen.
SPECIAL FUNCTION GROUP
20
In the Add Preset screen, the unit can be programmed to turn ON and OFF on specific days of the week and time of day.
Select the specific days of the week the unit will turn ON or OFF by tapping the buttons at the bottom of the screen.
SPECIAL FUNCTION GROUP
20