ACTi Q75 User manual

Outdoor Multi-Imager Dome
Hardware Manual
Q75
2020/08/13

www.acti.com
Hardware Manual
2
Table of Contents
Precautions.............................................................4
Safety Instructions .................................................................................... 6
Introduction.............................................................7
List of Models............................................................................................. 7
Package Contents...................................................................................... 8
Physical Description ................................................................................. 9
Mounting Options.....................................................................................11
Precautions...............................................................................................11
Before Installation.................................................12
Open the Dome Cover............................................................................. 12
Insert the Memory Card (Optional)......................................................... 12
Installation Procedures........................................13
Mounting the Camera with Wall Mount.................................................. 13
Mounting the Camera Directly on the Surface...................................... 16
Remove the Mount Kit........................................................................... 16
Mount the Camera................................................................................ 17
Waterproof the Cable Connections........................................................ 19
How to Use the Cable Gland................................................................. 19
Connect to Network................................................................................. 22
Other Cable Connections.....................................23
How to Connect a Power Adapter (Optional) ........................................ 24

www.acti.com
Hardware Manual
3
How to Connect Digital Input / Digital Output Devices......................... 25
Connecting DI/DO Devices................................................................... 25
How to Connect Audio Devices.............................................................. 27
How to Attach the RJ-45 Connector....................................................... 28
Accessing the Camera .........................................30
Configure the IP Addresses.................................................................... 30
Access the Camera.................................................................................. 34

www.acti.com
Hardware Manual
4
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
- Do not use the camera in unstable lighting conditions.
- Never use the camera close to gas or oil leak.
- Never face the camera to strong light for long periods of time.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instructions given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.

www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is
not installed and used in accordance with the instruction manual, it may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the interference at
their own expense.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.

www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments or accessories not recommended by the video product manufacturer as
they may cause hazards.
Water and Moisture
Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a dry
place protected from weather.
Servicing
Do not attempt to service this video product yourself. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions:
1) When the power-supply cord or plug is damaged.
2) If liquid has been spilled or objects have fallen into the video product.
3) If the inner parts of the video product have been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.

www.acti.com
Hardware Manual
7
Introduction
List of Models
This hardware manual contains the following model:
Q75
20MP Outdoor Multi-Imager Panoramic Dome with D/N, Adaptive IR,
Extreme WDR, SLLS, 4 Fixed Lenses, 4 pcs 5MP Sensors

www.acti.com
Hardware Manual
8
Package Contents
Check if the following items come with the camera package. If any of them is missing, please
contact your local sales agents or the Customer Help Desk (CHD).
Camera
Cable Gland
Screw Pack
Rubber Ring
Wrench
Drill Template
QIG& Warranty Card
Drill Template
QIG &
Warranty
Card

www.acti.com
Hardware Manual
9
Physical Description
No.
Item
Description
1
Digital Output
This connector connects to digital output device, such as alarm, etc. Digital
Output (DO) devices are used for applications like motion detection, event
triggering, alarm notifications, etc. See How to Connect Digital Input /
Digital Output Devices on page 25 for information.
2
Digital Input
This connector connects to a digital input device, such as a panic button,
etc. Digital Input (DI) devices are used for applications like motion
detection, event triggering, alarm notifications, etc. See How to Connect
Digital Input / Digital Output Devices on page 25 for information.
3
Power Input
This jack connects to the power adapter and power cord to supply power to
the camera. See How to Connect a Power Adapter on page 24.
4
Audio Output
This jack connects to an audio output device, such as a speaker. See How
to Connect Audio Devices on page 27.
5
Reset Button
The reset button is used to restore the factory default settings of the
camera, including the administrator’s password.
To reset the camera, do the following: Press and hold the reset button for at
least 10 seconds. The camera may take a few second to start resetting.

www.acti.com
Hardware Manual
10
No.
Item
Description
6
Audio Input
This jack connects to an audio input device, such as a microphone with
built-in amplifier. See How to Connect Audio Devices on page 27.
NOTE: Make sure that the connected audio input device has a built-in
amplifier. Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.
7
Ethernet Port
The Ethernet port connects to a network using a standard Ethernet cable.
8
Memory Card
Slot
Insert a memory card for local recording. See Insert the Memory Card
(Optional) on page 12.