Actiforce STEELFORCE PRO SLS SERIES User manual

English
Deutsch
Nederlands
SLS-IM0015-1EN-DE-NL
STEELFORCE PRO SLS SERIES
270 / 470 / 670
Assembly Manual
Read this manual thoroughly and store in a safe place.
Montageanleitung
Bitte sorgfältig lesen und sicher aufbewahren.
Montagehandleiding
Lees deze handleiding aandachtig door en bewaar deze goed.
ONCE PRINTED CONSIDER REFERENCE

2
English
Content
1 GENERAL ......................................................................................................................................................................... 5
1.1 Local value of the assembly/operating manual ......................................................................................................... 5
1.2 Intended use ......................................................................................................................................................................... 5
1.3 Improper use ......................................................................................................................................................................... 5
1.4 Grounding Instruction .......................................................................................................................................................... 5
1.5 Danger .................................................................................................................................................................................... 5
1.6 Content box .......................................................................................................................................................................... 6
2 SAFETY INFORMATION .................................................................................................................................................... 7
2.1 Symbols/warnings ................................................................................................................................................................ 7
2.2 Symbols used on the workstation frame ........................................................................................................................ 7
2.3 Maximum weight allowed on frame .............................................................................................................................. 7
2.4 Maximum weight allowed per column .............................................................................................................. 8
2.5 Organizational measures ................................................................................................................................................... 8
2.6 Informal safety measures ................................................................................................................................................... 8
2.7 Note for those assembling the workstation .................................................................................................................. 8
2.8 Transport and assembly ..................................................................................................................................................... 8
2.9 Use of the workstation frame ............................................................................................................................................ 8
2.10 Specific dangers .................................................................................................................................................................. 8
2.11 In an emergency .................................................................................................................................................................. 9
2.12 Maintenance and upkeep ............................................................................................................................................... 9
2.13 Cleaning.................................................................................................................................................................................. 9
2.14 Persistent risks ........................................................................................................................................................................ 9
3 ASSEMBLY ...................................................................................................................................................................... 10
3.1 Pre-assembly of the Crossbars ......................................................................................................................................... 10
3.1.1 Recommended Top Sizes .................................................................................................................................................. 10
3.2 Mounting the Feet .............................................................................................................................................................. 11
3.3 Mounting the Crossbar ...................................................................................................................................................... 11
3.4 Mounting the Top Support ............................................................................................................................................... 12
3.5 Adjustment of the Frame Width ...................................................................................................................................... 12
3.6 Mounting the Spacers ....................................................................................................................................................... 13
3.7 Mounting the Cable Clips ............................................................................................................................................13-14
3.8 Connecting the Electrical Components ..................................................................................................................... 15
3.9 Mounting the table top ..................................................................................................................................................... 16
3.10 Mounting the power supply underneath the table top . ......................................................................................... 16
3.11 Mounting Wire Clip .......................................................................................................................................................17-18
3.12 Clearance around the wall or moving parts 25mm of the table top ................................................................... 19
3.13 Frame Test without table top ......................................................................................................................................19-20
4 CORRECT POSITION OF SEAT......................................................................................................................................... 21
5 TECHNICAL SPECIFICATIONS ..................................................................................................................................22-24
6 OPERATION AND INDICATORS ..................................................................................................................................... 25
6.1 Indicators .............................................................................................................................................................................. 25
7 TROUBLESHOOTING ...................................................................................................................................................... 25
8 CUSTOMER SERVICE ...................................................................................................................................................... 26
9 MANUFACTURER ........................................................................................................................................................... 26
10 RECYCLING ................................................................................................................................................................... 26
10.1 Taking the workstation out of active duty ................................................................................................................... 26
10.2 Taking the workstation apart .......................................................................................................................................... 26
10.3 Recycling .............................................................................................................................................................................. 26
11 CERTIFICATIONS ............................................................................................................................................................ 71
ONCE PRINTED CONSIDER REFERENCE

3
Deutsch
Inhaltsverzeichnis
1 ALLGEMEINES .................................................................................................................................................................27
1.1 Bedeutung der Betriebs– und Montageanleitung .................................................................................................... 27
1.2 Sachgemäße Verwendung.............................................................................................................................................. 27
1.3 Sachwidrige Verwendung ................................................................................................................................................ 27
1.4 Erdungsvorschrift.................................................................................................................................................................. 27
1.5 Gefahr .................................................................................................................................................................................... 27
1.6 Lieferumfang ........................................................................................................................................................................ 28
2 SICHERHEITSHINWEISE ....................................................................................................................................................29
2.1 Symbol– und Hinweiserklärungen ................................................................................................................................... 29
2.2 Verwendete Symbole am Tischgestell .......................................................................................................................... 29
2.3 Zulässiges Gesamtgewicht auf dem Tischgestell........................................................................................................ 29
2.4 Zulässiges Gesamtgewicht pro Säule ............................................................................................................................ 30
2.5 Organisatorische Maßnahmen ....................................................................................................................................... 30
2.6 Empfohlene Sicherheitsmaßnahmen ............................................................................................................................. 30
2.7 Hinweise zur Montage ........................................................................................................................................................ 30
2.8 und Montage ....................................................................................................................................................................... 30
2.9 Benutzung des Tischgestells .............................................................................................................................................. 30
2.10 Besondere Gefahrenstellen .............................................................................................................................................. 30
2.11 Hinweise für den Notfall ..................................................................................................................................................... 31
2.12 Wartung und Instandhaltung ........................................................................................................................................... 31
2.13 Reinigung .............................................................................................................................................................................. 31
2.14 Restrisiken .............................................................................................................................................................................. 31
3 MONTAGE ......................................................................................................................................................................32
3.1 Vormontage der Traverse ................................................................................................................................................. 32
3.1.1 Empfohlene Tischplattenmaße ........................................................................................................................................ 32
3.2 Montage der Kufen ............................................................................................................................................................ 33
3.3 Montage der Traversen ..................................................................................................................................................... 33
3.4 Montage der Plattenträger .............................................................................................................................................. 34
3.5 Einstellen der Gestellbreite ................................................................................................................................................ 34
3.6 Montage der Abstandhalter ............................................................................................................................................ 35
3.7 Montage der Kabelhalterungen ............................................................................................................................... 35-36
3.8 Anschließen der elektrischen Bauteile .......................................................................................................................... 37
3.9 Montage der Tischplatte ................................................................................................................................................... 38
3.10 Montage des Netzteils unter der Tischplatte................................................................................................................ 38
3.11 Montage der Kabelclips .............................................................................................................................................. 39-40
3.12 Sicherheitsabstand zur Wand oder beweglichen Teilen von 25 mm um die Tischplatte ............................... 41
3.13 Test und Inbetriebnahme ohne Tischplatte ............................................................................................................ 41-42
4 ERGONOMISCHE SITZEINSTELLUNG ...............................................................................................................................43
5 TECHNISCHE DATEN ................................................................................................................................................. 44-46
6 BETRIEBSHINWEISE ..........................................................................................................................................................47
6.1 Fehlfunktionen ...................................................................................................................................................................... 47
7 FEHLERBEHEBUNG ...........................................................................................................................................................47
8 KUNDENDIENST ...............................................................................................................................................................48
9 HERSTELLER ......................................................................................................................................................................48
10 ENTSORGUNG ................................................................................................................................................................48
10.1 Außerbetriebnahme des Tischgestells ........................................................................................................................... 48
10.2 Tischgestell abbauen und ggf. zerlegen ...................................................................................................................... 48
10.3 Entsorgung ............................................................................................................................................................................ 48
11 ZERTIFIKATE ....................................................................................................................................................................71
ONCE PRINTED CONSIDER REFERENCE

4
Nederlands
Inhoudsopgave
1 ALGEMEEN ....................................................................................................................................................................49
1.1 Het belang van de montage– en bedieningshandleiding ..................................................................................... 49
1.2 Beoogd gebruik ................................................................................................................................................................... 49
1.3 Onjuist gebruik ..................................................................................................................................................................... 49
1.4 Aardingsinstructie ................................................................................................................................................................ 49
1.5 Gevaar ................................................................................................................................................................................... 49
1.6 Inhoud verpakking ............................................................................................................................................................. 50
2 VEILIGHEIDSINSTRUCTIES................................................................................................................................................51
2.1 Verklaring van symbolen en instructies ......................................................................................................................... 51
2.2 Gebruikte symbolen op het frame ................................................................................................................................. 51
2.3 Maximaal toegestaan gewicht op het frame ........................................................................................................... 51
2.4 Maximaal toegestaan gewicht per kolom ..................................................................................................... 52
2.5 Organisatorische maatregelen ....................................................................................................................................... 52
2.6 Informele veiligheidsmaatregelen ................................................................................................................................. 52
2.7 Vereisten aan de monteurs .............................................................................................................................................. 52
2.8 Transport en montage ....................................................................................................................................................... 52
2.9 Gebruik van het frame ...................................................................................................................................................... 52
2.10 Specifieke gevaren ............................................................................................................................................................ 52
2.11 Instructies voor noodgevallen ......................................................................................................................................... 53
2.12 Onderhoud en instandhouding ...................................................................................................................................... 53
2.13 Reiniging ................................................................................................................................................................................ 53
2.14 Overige risico’s ..................................................................................................................................................................... 53
3 MONTAGE .....................................................................................................................................................................54
3.1 Voormontage van de crossbar ....................................................................................................................................... 54
3.1.1 Aanbevolen bladmaat ...................................................................................................................................................... 54
3.2 Montage van de voeten .................................................................................................................................................. 55
3.3 Montage van de crossbar ................................................................................................................................................ 55
3.4 Montage van de bladdragers ......................................................................................................................................... 56
3.5 Instellen van de frame-breedte ...................................................................................................................................... 56
3.6 Montage van de afstandhouders .................................................................................................................................. 57
3.7 Montage van de kabelbinders.................................................................................................................................. 57-58
3.8 Aansluiten van de elektrische componenten ............................................................................................................. 59
3.9 Montage van het werkblad ............................................................................................................................................. 60
3.10 Montage van de handbediening. ................................................................................................................................. 60
3.11 Montage van de kabelclips ....................................................................................................................................... 61-62
3.12 Afstand van 25 mm tussen de muur of andere objecten en het werkblad .................................................. 63
3.13 Frame test zonder werklad ......................................................................................................................................... 63-64
4 CORRECTE ZITPOSITIE .....................................................................................................................................................65
5 TECHNISCHE SPECIFICATIES..................................................................................................................................... 66-68
6 BEDIENING EN GEBRUIKSAANWIJZINGEN ....................................................................................................................69
6.1 Gebruiksaanwijzingen ........................................................................................................................................................ 69
7 PROBLEEMOPLOSSINGEN .............................................................................................................................................69
8 KLANTENSERVICE ..........................................................................................................................................................70
9 FABRIKANT .....................................................................................................................................................................70
10 RECYCLING ...................................................................................................................................................................70
10.1 Buitenbedrijfstelling van het frame ................................................................................................................................. 70
10.2 Demontage van het frame .............................................................................................................................................. 70
10.3 Recycling ............................................................................................................................................................................... 70
11 CERTIFICATEN ................................................................................................................................................................71

5
1 General
1.1 Local value of the assembly/Operating Manual
The guiding principle for safe use and trouble-free operation of this workstation frame is knowledge
of basic safety information and regulations. This assembly/operating manual contains the most im-
portant information needed for assembling and operating the workstation frame safely. This assem-
bly/operating manual, in particular the safety information contained herein, must be observed by
any person building the frame and working on the finished surface. More importantly, the rules and
regulations applying to accident prevention in the locality in which the workstation frame is to be
used must be observed at all times.
1.2 Intended use
The workstation frame must be used only as a height-adjustable workstation for sitting/standing use in
offices or other enclosed areas. The frame must be used for this purpose only. The workstation frame
may be set up and operated solely in office environments. Do not use the workstation frame in the
home. Please observe the provisions of Section, Safety Information. This appliance is not intended for
use by persons (including children) who are required assistance, unless they have been given super-
vision or instruction concerning use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the workstation frame. Children may be
unaware of the dangers presented by the workstation frame if unsupervised. Any other use than the
above shall be deemed improper. The manufacturer can in no way be held liable for damage aris-
ing from improper use.
Intended use shall also include:
 Observation of all information from the assembly/operating manual and
 Prohibition of any sort of addition to/conversion of the workstation.
1.3 Improper use
 Never use the workstation frame to lift people or loads.
 Do not exceed the maximum load of the workstation frame.
 Do not use the workstation frame in the home; alternatively, use it only in offices.
 The workstation frame is only to be used with the power supply unit provided with the work-
station frame.
1.4 Grounding Instruction
This workstation frame must be grounded. Connect this workstation frame to a properly grounded
outlet only. If it should malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This workstation frame is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
For protective earth, the terminal is intended to connect with equipotential bonding of building
where the workstation frame is being setup. Terminals for the connection of external equipotential
bonding conductors shall allow the connection of conductors having nominal cross-sectional areas
of 2,5 mm2 to 6 mm2.
1.5 Danger
Improper connection of the workstation frame grounding conductor can result in a risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
WARNING: Any changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
English

6
Assembly requires 2 people!
1.6 Content Box
English
Items
8x
A
M8x50
8x
B
M6x16
8x
C
M10x35 4.5x20
28x
D
Hardware Kit
2x
3
2x
1 2x
2
2x
9
4x
10
1x
8
4x
6
4x 4
2x 7
1x
12
optional
4x 5
1x
11
**
optional
** Control Unit 11(a) :
I. SMART-e-2-actiforce-EU : Input: 220-240Vac, 50-60Hz, 2.5A; Output: 216VA / 24V
II. SMART-e-2-actiforce-US : Input: 120Vac, 60Hz, 5A; Output: 216VA / 24V
** Control Unit 11(b) :
I. COMPACT-e-2L-actiforce-EU : Input: 220-240Vac, 50-60Hz, 5A; Output: 288VA / 24V
II. COMPACT-e-2L-actiforce-US : Input: 120Vac, 60Hz, 10A; Output: 288VA / 24V
Table : 24VDC, 4A
Tools

7
2 Safety Information
2.1 Symbols/Warnings
The assembly/operating manual uses the following terms and signs to indicate dangers:
This symbol indicates an immediate threatening situation for any person’s life or health.
Failure to adhere to such information may have serious consequences for health, or
could even result in life-threatening injury or death.
This symbol indicates important information. Failure to adhere to such information
could lead to damage to the workstation.

2.2 Symbols used on the workstation frame
Do not place objects or parts of the body under the workstation frame or between
the cross members. This could cause serious injury or even result in death.
2.3 Maximum weight allowed on frame
Do not exceed the maximum permitted load of
(a) 80 kg including table top (Smart-e-2)
(b) 100 kg including table top (Compact-e-2)
on the workstation frame. Avoid unbalanced load, distribute the weight
evenly, otherwise overload may occur. Overloading a frame may cause
breakage and close by individuals may suffer serious injuries as a conse-
quence.
80 kg
20KG
Example (a) :
> 80 kg
English
Example (b) :
100 kg
> 100 kg
20KG
The entire weight should be
evenly distributed.

8
2.5 Organizational measures
 The workstation frame can best be assembled by two people. Turning the frame, once the
work surface has been fitted, is a task in particular which requires two people!
2.6 Informal safety measures
 Keep the assembly/operating manual in the place where the workstation frame is used at all
times.
 Make sure that all safety information on the table (see Section Symbols used on the workstation
frame) is legible, replacing the same if necessary.
2.7 Note for those assembling the workstation
 The workstation must be assembled/worked on by persons over the age of 16.
 The persons referred to above must have read and understood the assembly /operating man-
ual.
2.8 Transport and assembly
 The workstation frame must be moved by two persons only, and in such cases must be retract-
ed.
 Do not drag or pull the workstation frame over the floor.
 Assemble the workstation frame with the supplied tools only. They are the only tools which en-
sure that the screws can be tightened to the correct torque.
2.9 Use of the workstation frame
 Do not allow children to use the workstation frame unsupervised. Children may be unaware of
the dangers presented by the workstation frame. They would be in serious danger of injuring
themselves, possibly even with fatal consequences. Further adjustment must then be impossi-
ble as a safeguard against use by children.
 The workstation frame must only be used in appropriate areas.
 Do not use the workstation frame on an uneven surface. In such conditions it will not be steady.
 Never exceed the maximum load on the workstation frame.
2.10 Specific dangers
 When adjusting the height of the frame there is danger of injury. Make sure that there is no-one
else in the immediate surroundings of the frame.
 When assembling the workstation frame, make sure there is ample space to avoid collisions
(i.e. inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable
directions.
 Make sure there is ample space to avoid collisions if there are objects on the work surface such
as computers or computer peripherals.
 Make sure there is clearance of at least 25 mm from all other furniture, all around the
workstation frame.
English
2.4 Maximum weight allowed per column
Do not exceed the maximum permitted load of 50 kg (including table top) on a col-
umn. Overloading a frame may cause breakage and close by individuals may suffer
serious injuries as a consequence.
50 kg

9
2.11 In an emergency
 Stop using the workstation frame at once if you notice anything unusual (strange sounds etc.).
 Have the workstation frame repaired by specialists. Refrain from using the workstation frame
until it has been successfully repaired.
2.12 Maintenance and upkeep
 The workstation frame and its components are low-maintenance items and need no special
regular maintenance.
 Do not perform any repairs on the work surface or other components yourself.
 Do not alter the construction of the work surface or its frame.
 Any faulty components removed must be replaced with new, original components from the
manufacturer. Use only original replacement parts made by the manufacturer. Have any such
work carried out by a specialist, making reference to this Assembly/operating manual.
2.13 Cleaning
 Dust the workstation frame once a week with a dry cloth.
 Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fort-
night.
2.14 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage to
the workstation frame or to other items. The workstation frame must be used only:
 for the purpose for which it was intended.
 if it is completely safe to do so.
English

10
3 Assembly English
Before attempting assembly, read the Safety Information in Section 2.
To protect components and the floor from scratches, it is advisable to use a pad before
assembly. You can, for example, use the supplied cardboard by unfolding it.
C
1
 Do not tighten the set screws on the crossbars yet!
3.1 Pre-assembly of the Crossbars
Frame set-up Width / size table top Depth / size table top Table Top Thickness
110 cm 120 cm 80 cm 2.5 cm
130 cm 140 cm 80 cm 2.5 cm
150 cm 160 cm 80 cm 2.5 cm
170 cm 180 cm 80 cm 2.5 cm
3.1.1 Recommended Top Sizes
10
10
9

11
 2
3
3.2 Mounting the Feet
6
3
B
1 2x
A
A
3.3 Mounting the Crossbar
English
10
10
9

12
4
2
A
2
3.4 Mounting the Top Support
5
3.5 Adjustment of the Frame Width
Adjust the frame into the desired width. Tighten the set screws on the crossbar with
Allen key M3.
English

13
3.6 Mounting the Spacers
3.7 Mounting the Cable Clips
4
6
7
English
5

14
8
English
5

15
Keep in mind that the desk which you are assembling is height adjustable. The cables
of the electrical components must be able to freely follow the movement of the desk.
9
3.8 Connecting the Electrical Components
10
8
English
8
OPTIONAL
** 11
** 11
12
12

16
3.9 Mounting the table top
3.10 Mounting the power supply underneath the table top
11
28x
D
OPTIONAL
28x
D
12
English

17
Bond losse cable
together with cable clip.
Mount the wire clips for cable. Peel off paper backing
and stick to table top. Place wire into each wire clip.
3.11 Mounting the Wire Clip
13
7
5
English

18
14
7
OPTIONAL
Bond losse cable
together with cable clip.
5
English
Mount the wire clips for cable. Peel off paper backing
and stick to table top. Place wire into each wire clip.

19
25mm
(1”) 25mm
(1”)
25mm
(1”)
3.12 Clearance around the wall or moving parts 25mm of the table
Allow a minimum clearance of 25mm (1“) from the edge of a table top to a wall
or moving parts.
English
UP DOWN
Please make sure that the workstation frame can move freely and correct at all
times.
In case you need to disconnect cables from the electrical components always be
sure to disconnect power first.
In case the height adjustment is not operating normally, stop using the workstation
frame immediately and disconnect the power. Get in contact with customer service
for further advise
3.13 Frame test without table top
Reset Mode
The first time you put in the plug of the power supply into the socket the height adjustment can only
be operated in the reset-mode. As long as the reset-mode is enabled, the system can only move
downward. In order to use the system normally, please follow the next steps:
 Press and hold the down-button, the system slowly moves downward.
 Please move the system to the lowest position. This position will be used as reference-point (zero-
point).
 Keep the button pressed for a moment when the system has reached the lowest position. This
will end the reset-mode.
 The system can be operated normally now. Press and hold the up- or down-button to move the
system to the desired height. The system stops when you release the buttons.
15

20
Functions of the Memory Master (Optional)
UP
DOWN
SAVE
Save
Memory Buttons
UP/DOWN
Press and hold these buttons to adjust height into a desired position. If you release the button the
height adjustment will stop.
Saving a preferred height position
Adjust the frame to a desired position. Press SAVE.
The display will show:
Immediately press one of the memory buttons, The display “-” will be replaced by the number of the
button you have chosen. Two seconds later the power supply will confirm the setting with a double
click sound.
Memory Buttons
Press and hold these buttons to adjust height into a preferred position. When you release the button
the height adjustment will stop. When the frame reaches the preferred position the height adjustment
will slow down and stop.
Changing displayed height
This function only changes the displayed height but not the actual height. Press SAVE once.
Ass soon as the display shows:
Press and hold DOWN until the displayed height blinkingly reappears. You can now change the value
by pressing UP or DOWN. To conclude this process simply press save.
Reset Mode
The first time you put in the plug of the power supply into the socket the height adjustment can only
be operated in the reset-mode. As long as the reset-mode is enabled, the system can only move
downward. In order to use the system normally, please follow the next steps:
 Press and hold the down-button, the system slowly moves downward.
 Please move the system to the lowest position. This position will be used as reference-point (zero-
point).
 Keep the button pressed for a moment when the system has reached the lowest position. This will
end the reset-mode.
 The system can be operated normally now. Press and hold the up- or down-button to move the
system to the desired height. The system stops when you release the buttons.
System restart—initializing the reset-mode
In order to initialize reset it is generally necessary to lower the frame to its lowest position.
 Press “down-” buttons (about 10 seconds) until the sound “click” is heard.
 Proceed with the “Reset-mode” instructions listed above.
English