ACTiSYS ACT-IR100SD OBEX Server User manual

Intelligent SIR RS232 Adapter
Intelligent SIR RS232 Adapter
Intelligent SIR RS232 Adapter
ACT-IR100SD / ACT-IR100SDi
¾Supports mandatory IrDA®layer: IrPHY, IrLAP, IrLMP and IAS.
¾Supports upper layers TinyTP, IrCOMM, IrLPT, and OBEX transport.
¾Supports host baud rate from 1.2 kbps to 115.2 kbps, which is changeable by
PC utility; IrDA baud rate from 9.6 kbps to 115.2 kbps, which is flexible, setting by
IrDA devices.
¾Supports both IrDA Primary and Secondary mode, changing mode via a PC
utility.
¾No driver is needed.
¾IR frame and Host buffer are 2048 bytes separately.
¾Supply voltage 6.0 V to 12V.
¾Power consumption: 20 mA standby, 50 mA active.
¾Supports 3 wires host interface (Tx, Rx and GND).
¾Interface to Host:
- Full-duplex asynchronous serial (TXD, RXD)
- Hardware flow control (RTS, CTS)
-Optional line status for link control (DTR, DSR)
-Other unused inputs (RI, CD)
¾Internal PCBA available (Model # ACT-IR100SDi)
All trademarks, logos, company and product names are owned by the respective companies &
organizations

Specifications
•Infrared Transmitting Range :
Typical 158 cm; Maximum 200 cm
•DC Supply Voltage :
6 V ~ 12 V ; Typical 7.5 V
•Operating Temperature Range ：
0o C ~ 60o C
•DC Current (Standby Mode) ：
40 mA
•DC Current (Active Mode) :
•RS232 Signal Threshold Level ：
±3 V ~ ±12 V; Typical ±6 V
Typical 50 mA; Maximum 150 mA
Spec
Intelligent SIR RS232 Adapter
Intelligent SIR RS232 Adapter
Intelligent SIR RS232 Adapter
921 Corporate Way, Fremont, CA 94539
Tel: [phone], Fax: [phone]
E-mail: [email protected], http://www.actisys.com
ACT-IR100SD / ACT-IR100SDi
All trademarks, logos, company and product names are owned by the respective companies &
organizations.
Specifications