ACTiSYS IR103SL Manual

ACT-IR103SL & IR8203L, v0.1.1-030208 IrFM POS Adapter & Protocol IC
© Copyright 2002-2003, ACTiSYS Page 1 of 1 ACTiSYS Confidential
Corp.
48511 Warm Springs Blvd., Suite 206, Fremont, CA 94539 Tel: [phone],
Fax: [phone], Website: http:\\www.actisys.com, E-mail: [email protected]
IrFM POS Adapter and Protocol IC
ACT-IR103SL & IR8203L
(v0.1.1-030208)
(c) Copyright ACTiSYS Corp. 2002-2003
February 08, 2003

ACT-IR103SL & IR8203L, v0.1.1-030208 IrFM POS Adapter & Protocol IC
© Copyright 2002-2003, ACTiSYS Page 2 of 2 ACTiSYS Confidential
IrFM POS Adapter and Protocol IC
(ACT-IR103SL & IR8203L, V0.1.1-030208)
Revision History
Revision Date Comment
Rev. 0.1.0 01/20/2003 First Draft
Rev. 0.1.1 02/08/2003 Added IR103SLi/IR8203L photo

ACT-IR103SL & IR8203L, v0.1.1-030208 IrFM POS Adapter & Protocol IC
© Copyright 2002-2003, ACTiSYS Page 3 of 3 ACTiSYS Confidential
Table of Contents
Revision History........................................................................................................................ 2
A) IrFM POS Adapter and Protocol IC, IR103SL & IR8203L ........................................... 4
B) Benefits of IR103SL & IR8203L ........................................................................................ 4
C) Features of IR103SL & IR8203L....................................................................................... 4
D) IrFM Protocol Partition Block Diagram........................................................................... 4
E) IrFM POS Adapter and Protocol IC Photo ...................................................................... 5
About IrFM:.............................................................................................................................. 6
About ACTiSYS Corp..............................................................................................................6

ACT-IR103SL & IR8203L, v0.1.1-030208 IrFM POS Adapter & Protocol IC
© Copyright 2002-2003, ACTiSYS Page 4 of 4 ACTiSYS Confidential
IrFM POS Adapter and Protocol IC
ACT-IR103SL & IR8203L
A) IrFM POS Adapter and Protocol IC, IR103SL & IR8203L
IrFM POS Front End Adapter is a sub-assembly designed specifically to handle the
lower level IrDA protocol layers for IrFM POS. It is a ready to use, assembled and
tested hardware/firmware sub-assembly that handles IrPHY, IrLAP (including Fast
Connect), IrLMP (including IAS for IrFM OBEX), and TinyTP. Physically, it can be as
external RS232 adapter (IR103SL), internal PCB (IE103SLi), or protocol IC (IR8203L).
B) Benefits of IR103SL & IR8203L
1) Speed up the IrDA IrFM certification process.
2) Speed up time to market for IrFM POS.
3) Lower the non-recurring cost of developing IrFM POS.
4) Lower the incremental cost of producing IrFM POS.
5) Lower the maintenance cost of IrFM POS.
6) Relieves the hosting IrFM POS from handling Fast Connection.
(Newly published by IrDA, January 15, 2003).
7) Relieves the hosting IrFM POS from handling the Transceiver hardware specifics.
8) Relieves the hosting IrFM POS from handling time critical requirements of IrLAP.
9) Enables easy POS emulation to test PTD (Personal Trusted Device).
C) Features of IR103SL & IR8203L
1) Simple wired serial interface to the hosting IrFM POS.
2) Automatically handles Fast Connection. (Newly published by IrDA, January 15, 2003)
without burdening the hosting IrFM POS.
3) Efficiently and automatically handles the minimum turnaround, maximum turnaround,
and all time critical requirements.
4) Compliant to IrDA requirements for IrPHY and IrLAP layers.
5) Very low component count. Small and modular in construction.
6) Low cost, low power.
D) IrFM Protocol Partition Block Diagram
1) IR8203L/IR103L/IR103Li includes; IrLAP with Fast Connect, IrLMP, IAS,
Tiny TP and IrFM OBEX Transport.
2) This IrFM POS external adapter, internal PCB, or controller IC interfaces
with host POS system through wired serial with flow control.

ACT-IR103SL & IR8203L, v0.1.1-030208 IrFM POS Adapter & Protocol IC
© Copyright 2002-2003, ACTiSYS Page 5 of 5 ACTiSYS Confidential
3) What’s left, and the only practical way to partition, is to implement in host POS
system; IrFM OBEX, Core IrFM Protocol, Core IrFM Services and Proprietary
Services, and IrFM Application program. These are show below:
E) IrFM POS Adapter and Protocol IC Photo
An example of the ready made/pre-tested IrDA/FastConnect internal PCB,
ACT-IR103SLi and IrFM protocol processor IC, ACT-IR8203L are shown below:

ACT-IR103SL & IR8203L, v0.1.1-030208 IrFM POS Adapter & Protocol IC
© Copyright 2002-2003, ACTiSYS Page 6 of 6 ACTiSYS Confidential
About IrFM:
The Infrared Financial Messaging (IrFM) “Point & Pay” Specification v1.0 was
published on Jan. 15, 2003 for free download from IrDA website (www.irda.org). It
utilizes existing financial services infrastructures to process wireless payment
transactions (credit, debit and smart cards, checks, and loyalty cards) at the point of
sale (POS). It easily and inexpensively enables existing POS devices (card readers,
ATMs, kiosks, gas pumps, turnstiles, toll booths, etc.) to receive and send consumer
payment information and approvals wirelessly between POS and handheld devices. It is
built upon proven IrDA standards for cell phones, PDAs and terminal adapters. It also
provides a compatibility path for RF technologies; e.g. Bluetooth, WAP, 3GPP.
Changes in existing IrDA Standards was necessary in order to provide much faster
connect time capability for express payment environments such as mass transit
turnstiles, toll booths and vending machines (less than 0.2 seconds). These
modifications (IrLAP Fast Connect) have now been incorporated into this recently
released IrFMv1.0 Standard, an improvement that will provide significant overall IrDA
user benefits. At the same time, requirements for vouchers, loyalty programs and
coupons were also being added.
About ACTiSYS Corp.
ACTiSYS Corp., has been offering wireless connectivity hardware and software
solutions for the mobile applications since 1990. We offered the IR wireless printing and
PC data transfer two-in-one adapter for PDAs in 1991. We are the leading supplier of
IrDA adapters for PC-RS232, USB, motherboard, and parallel and serial printers.
We also offer IrDA protocol processor, and external RS232 adapter and internal PCB
for embedded systems. We supply the effective IrDA BER (Bit Error Rate) handheld
tester and is one of the five IrDA certification centers approved by IrDA Test Council.
ACTiSYS was one of the early members of IrDA since 1992. Our executives were
elected by the IrDA member companies to be chair of Technical committee, and
Test/Interoperability committee. We continue develop unique IR and RF solutions for
vertical markets as well as volume products for the consumer market. The company is
privately funded and is headquartered in Fremont, California. Visit www.actisys.com for
more information.