ACTiSYS IR220LDB-LA User manual

¾Uses IrDA®-v1.0, RAW IR communication standard.
¾Connects to microcontroller, UART, or EasyLog module.
¾Half duplex communications.
¾10-way pin header.
¾Supports 9600 bps (Other data rates are available by request).
¾IR pulse: 1.63 μS.
¾No IrDA protocols supported, supports only Raw IR.
¾Compatible with LASCAR’s PANEL-IR PCBA module.
¾RoHS compliant.
Serial Data to RAW SIR Interface PCBA
Serial Data to RAW SIR Interface PCBA
Serial Data to RAW SIR Interface PCBA
ACT-IR220LDB-LA, Compatible with LASCAR PANEL , Compatible with LASCAR PANEL- -IR module IR module
* All trademarks, logos, organization & company names and product model names are owned
by of the respective organizations and companies.

ACT-IR100MU SIR-USB Printer Adapter
Serial Data to RAW SIR Interface PCBA
Serial Data to RAW SIR Interface PCBA
Serial Data to RAW SIR Interface PCBA
921 Corporate Way
Fremont, CA 94539-6118, U.S.A.
Tel: [phone], Fax: [phone]
E-mail: [e-mail]
Web Site: http://www.actisys.com
Specifications Spec
•Compatibility:
Fully compliant with IrDA®-v1.0, Raw IR specification
•Communication speed and distance:
9600 bps (Other data rates are available); 1 cm -158 cm
•Power source:
Obtains power from host system
•Power consumption:
Active current: < 60 mA; standby current: < 15 mA
•Dimension / weight:
38 mm (L) X 18 mm (W) X 12.5 mm (H) / 61 g
•Operating / storage temperature:
0° C to +60° C / -20° C to +85° C
ACT-IR220LDB-LA, Compatible with LASCAR PANEL , Compatible with LASCAR PANEL- -IR module IR module
•Pin function definition
PIN No. Function Remarks
1~3; 6~8 N/C No connection. Do not connect anything to these pins.
40 V 0 V power supply.
5V+ 5 V power supply.
9RxD Receive data – received data appears on this pin.
10 TxD Transmit data – applies data to be transmitted to this pin.
If the PCBA is solely used for receiving data then TxD
should be connected to V+ via a 47kΩ
resistor