ACU-RITE 00829 User manual

Instruction Manual
Weather Forecast Station
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
..... 2
.... 3
Setup .................................... 4
Sensor Setup ......................... 4
........................ 5
®.................. 6
...... 6
............. 7
Using the Forecast Station ...... 8
..................... 9
Care & Maintenance.............10
...........................10
®..11
........................12
FCC Information ...................12
Customer Support .................13
..............................13
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Visit www.acurite.com/support

and retain it for future reference.
Unpacking Instructions
Package Contents
2. Outdoor Sensor
1
2
3
4
5
OUTDOOR SENSOR
1. Integrated Hanger
2. Wireless Signal Indicator
3. Battery Compartment
4. A-B-C Switch
5. Battery Compartment Cover
2
Display with Tabletop Stand
PRODUCT REGISTRATION
Register online to receive 1-year warranty protection
www.acurite.com/product-registration
IMPORTANT PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

15
13
12
11
10
8
9
1
14
2
4
3
5
6
7
17 16
DISPLAY
1. Current Outdoor Temperature
2. Heat index, Dew Point or
Frost Point
3. Display Low Battery Indicator
4. Current Indoor Temperature
5. Auto or Manual Pressure Mode
Indicates pressure mode preference;
arrow indicates direction the pressure
is trending.
Auto Pressure Mode
Manual Pressure Mode
6. Moon Phase
7. DOWN Button
For setup preferences.
8. UP Button
For setup preferences.
9. SET Button
For setup preferences.
10. 12 to 24 Hour Weather Forecast
from the outdoor sensor to generate
11. Learning Mode Icon
12. Current Indoor Humidity
13. Current Outdoor Humidity
14. Outdoor Sensor Signal Strength
15. Sensor Low Battery Indicator
16. Date
17. Intelli-Time
®
Clock
3

SETUP
Sensor Setup
1
2
Set the A-B-C Switch
Install or Replace Batteries
2 Install Batteries
compartment for part 2.
compartment.
1 A-B-C Switch
set to match
A B C
4

Display Setup
1 Set the A-B-C Switch
and the sensor in order for the 2 Install or Replace
Batteries
compartment cover.
compartment.
cover.
A B C
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
5

Intelli-Time® Clock
Set the Time, Date & Units
Press the “
”
or “
6

Placement for Maximum Accuracy
Display Placement
Outdoor Sensor Placement
Important Placement Guidelines
TV 3
(330 feet maximum)
(.91 m)
AT
LEAST
APART
(100 meters)
Setup is Complete
7

OPERATION
Using the Weather Forecast Station
Learning Mode
Weather Forecast
RAIN/SNOW
MIX LIKELY
(windy)
(Lightning=Stormy)
SNOW
LIKELY
LIGHT RAIN
LIKELY CLOUDY PARTLY CLOUDY SUNNY
View the complete list of icons atwww.AcuRite.com/acurite-icons
Barometric Pressure
-
-
Moon Phase
WAXING 1ST WAXING FULL WANING 3RD WANING NEW
CRESCENT QUARTER GIBBOUS GIBBOUS QUARTER CRESCENT
High & Low Records
“
8

“
Troubleshooting
No outdoor sensor
reception
Outdoor
temperature
showing dashes
Inaccurate forecast
Inaccurate
temperature
or humidity
sources or vents (see page 7).
moisture sources (see page 7).
9

Display screen
not working
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.acurite.com/support
Care & Maintenance
Display Care
Outdoor Sensor Care
Calibration
Calibrate Temperature & Humidity
”
3. Press the “ ” or “
4. Press the “ ” icon
10