ADAPT SOLUTIONS SPEEDY-LIFT User manual

1
SPEEDY-LIFT

2
USER GUIDE
To get into your vehicle
The SPEEDY-LIFT is a product like no other. Speed and ease are the foundations of its design.
Follow the next few steps:
After transferring out of your wheelchair, open the sliding door to your vehicle and retrieve the hand held pendant.
Press and hold the OUT button until the SPEEDY-LIFT has reached its lowest point outside of the vehicle then release
the button.
Simply roll your wheelchair up to the SPEEDY-LIFT, press and hold the IN button and watch the SPEEDY-LIFT do the
rest.
Once your wheelchair is in the vehicle, release the IN button, replace the hand held pendant. You can now close the
door and get on your way.

3
USER GUIDE
To get out of your vehicle
Follow the next few steps:
Open the sliding door of your vehicle and retrieve the hand held pendant.
Press and hold the OUT button and watch the SPEEDY-LIFT do the rest.
Once your wheelchair is outside of the vehicle, roll it away from the SPEEDY-LIFT.
Press and hold the IN button until the SPEEDY-LIFT is fully stowed and then release the button.
Place the hand held pendant inside the vehicle and close the door.
WARNING
DO NOT USE A WHEELCHAIR EXCEEDING 95 LBS.
WARNING: This product can expose you to chemicals including benzene, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

4
MANUAL BACKUP SYSTEM
Your new SPEEDY-LIFT is equipped with a manual backup system that will allow your lift to be stowed manually. Please
contact your dealer for full diagnostic and needed repairs.
1. Locate the release handle on the side of the SPEEDY-LIFT. *CAUTION: The SPEEDY-LIFT up / down function is
spring loaded. Place your hand on the top of the unit before lowering the release handle.
2. Press and hold down the release handle and push the SPEEDY-LIFT back into the vehicle.

5
BRACKET DESIGNED FOR A MANUAL FOLDABLE WHEELCHAIR
Remove either ‘pin’ from the end of the upper cylindrical tube and slide it out from within the bracket. For the lower cylindrical
tube, you must remove both ‘pins’. Once you have done that, slide the cylindrical tube to the left or right until the one side is
free, then simply slide out the other side. Your wheelchair is now ready to be folded.

6
3 YEAR LIMITED WARRANTY
SPEEDY-LIFT
Adapt Solutions # 1 Ltd. (Adapt Solutions), warrants to the original purchaser of a SPEEDY-LIFT that the equipment is free
from defects in material and workmanship for a period of three years from date of purchase.
During the first year of the warranty, Adapt Solutions will supply the replacement parts as well as a pre-set monetary amount
(determined by Adapt Solutions) for the repair if a defect in materiel or workmanship is discovered. After the initial year of this
warranty, only parts and components are covered. This warranty does not cover labour and other services after the initial
year. Freight and other related repair charges will be the responsibility of the original purchaser.
The only remedy for a defect in one of Adapt Solutions products shall be the repair or the replacement, at the discretion of
Adapt Solutions, of the defective part or component. If repair or replacement is not commercially practical or cannot be
timely made, Adapt Solutions may decide to refund the purchase price of the equipment instead of repairing or replacing
the original equipment.
In no event shall Adapt Solutions be responsible for indirect, incidental or consequential damages, whether such damages
arise from claims based on contract, warranty, tort (including negligence), strict liability or product liability.
All implied warranties, including any warranty of merchantability or fitness for a particular purpose, are limited in their duration
to the length of the warranty stated above for the affected component.
This warranty is to the original purchaser only, and excludes product damage due to installation error, product misuse,
product abuse, accidents, physical damage, damage in shipment, modifications not made by Adapt Solutions, or repairs
undertaken by anyone other than authorized distributors.

7
TO OBTAIN WARRANTY PARTS OR REIMBURSEMENT
You must follow these procedures:
1. Obtain warranty authorization by calling your local Adapt Solutions dealer or Adapt Solutions directly at 1-866-641-0419.
2. Return the faulty Adapt Solutions component/equipment, freight prepaid, to the address provided by your Adapt
Solutions dealer or Adapt Solutions with proof of purchase indicating the date purchased.
Adapt Solutions will pay for shipping back to the purchaser within the continental United States and Canada if a defect in
materiel or workmanship is discovered. Return freight and repair charges will be the responsibility of the purchaser if the
problem is not covered by warranty.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state/ province to
province. Adapt Solutions specifically does not authorize any person to extend the time or scope of this warranty.
For further information regarding this limited warranty, please contact us by calling 1-866-641-0419 or by writing at the following
address:
Adapt Solutions/Warranty Department
145 Damase-Breton
St-Lambert-de-Lauzon, Québec
G0S 2W0 Canada

8
WARRANTY REGISTRATION
Adapt Solutions #1 Ltd located in St-Lambert-de-Lauzon, Québec, Canada, warrants this product to be free from any
manufacturer’s defect and workmanship for a period of three years from the date of purchase. This product has to be
installed by an authorized dealer and has to be operated properly to be warranted. This warranty is limited to the original
purchaser and does not cover defects on the vehicle. The warranty registration must be completed and returned within 30
days of purchase. This warranty does not cover abnormal wear or damages resulting from an accident, misuse, neglect of
if the product has been altered in any way or aspect. Defective parts must be returned by an authorised dealer, who will
have received a prior return authorization from Adapt Solutions #1 Ltd. All warranted parts shall be sent to Adapt Solutions
#1 Ltd prepaid. Parts will be replaced or repaired at Adapt Solutions #1 Ltd.
Date installed:______________________________________
Dealer:_____________________________________________
Dealer signature:____________________________________
TO KEEP FOR YOUR RECORDS
(Place serial number here)