Addlogix EV-2100 User manual

EV-2100 Quick Start Guide
Congratulations and thank you for your EV-2100 purchase. This guide will
help you start using your EV-2100 device as quickly as possible. A more
extensive User’s Manual is included on the enclosed CD.
Note:Color scheme may vary
Video Outputs: VGA and DVI
Audeo Outputs: 3.5mm stereo
Audio Cable: 3.5 stereo male – male
Power AudioVGA RJ45
InternetVue 2100:
Overall Requirements:
TV or projector with RGBHV HDB15 (VGA) or DVI-D video inputs
PC running:
– Windows XPorVista RC1
– Pentium 4 orM,1.8 GHz or faster; slower CPUs okay for viewing slow-moving
or static images
– 512MB RAM or more (1024MB RAM recommended for Vista)
– Wired (10/100)orwireless (802.11b/g) network connection; WEP,WPA/WPA-PSK
with TKIP or AES encryption supported
Make sure that theTV or projector and the EV-2100 is
unpowered.Connect the EV-2100 to yourTV or projector’s
associated AV inputs
Connect the power adapter to the EV-2100 power jack inputrst
(a),and then plug in the power adapter into and AC outlet
(b), Power on yourTV or projector and select the associated AV input.
2
(a)
(b)
DVI

Launch thePC2TV application by double-clicking the PC2TV iconon your
Windows’ desktop. Typically,the EV-2100 will connect automatically
unless there are additional receivers on the wired LAN or within wireless range.
If this happens,select the EV-2100 by its ID as shown in the previous step.
4
In about 30-60 seconds, the EV-2100 will be fully initialized,
and the followingimage will appear on your TV.
3
This validates the connection between the EV-2100 andthe TV
or projector. Next, you can begin the PC2TV software installation onto
your computer by inserting the CD into your PC’s CD-ROM drive.
Follow all onscreen instructions andprompts.
5
Notes:
•If you require wireless Internet access througha wireless router
or accesspoint with security (WEP,WPA,WPA-PSK/TKIP)
while connected to the EV-2100, you may be asked to provide
the Wireless Key. Write down your wirelesssettings below for
future reference.
Wireless key (if applicable)
Network Authentication Encryption
Open/ Shared WEP
WPA TKIP
WPA-PSK AES
For Internet access
using RJ45 wired Ethernet connection, please refer to the User’s Manual on the CD.
•PC2TV is a CPU-intensive application. To maximize audio/video
performance andquality, close all unnecessary programs. Conrm
that your notebook or laptop’s power adapter is fully plugged in
to ensure full CPU speed.
•PC2TV requires control over your PC’s networkingsubsystem
therefore the user musthave administrative privileges.
PC2TV is a trademark of Quartics, Inc. Windows is a registered trademark andVista is a trademark
of Microsoft Corporation in the United States and other countries. Other brand and product names
may be trademarks or registered trademarks of their respective holders.