
ADEZZ®
WE PRODUCE GARDEN PRODUCTS FOR PROFESSIONALS
WE PRODUCE GARDEN PRODUCTS FOR PROFESSIONALS
1/5
Fibreglass Planters
Product description
The upper edge of these planters is reversed twice, which gives these
planters a splendid timeless appearance. The planters are manufac-
tured with high-quality reinforced Fibreglass. Because the reinforce-
ment has been extended into the corners, these corners cannot tear
out. The planter is coloured through the entire material and will there-
fore retain its colour. As standard all breglass planters are supplied in
RAL 7021 (high gloss RAL 9016).
General information
Our planters consist out of:
• Double folded top edge
• Material thickness: 3 mm
• Reinforcements against deformation
• 5 year warranty (descending)
Options
• Wheels (not all models)
• Coating in 7 RAL-colours
• Overow pipe
Colours
Stock colours
• Fibreglass: RAL 7021
• Fibreglass glossy: RAL 9016
Fibreglass planters are also available in
RAL colours: 7006 | 7016 | 7035 | 9005 |
9010 | 9016 (10% colour surcharge).
Specifications
Points of attention
• All packaging materials must immediately be removed from the products.
• Note! Always drill drainage holes in the bottom of the planter, use (if present) the raised parts of the bottom of the planter.
• Watertight planters are not suitable for pond application.
• Our planters are not suitable to be moved once lled.
Maintenance
• Clean at least 2x per year. Rinse the planter with clean tap water to remove dirt (Do not use a high-pressure cleaner!) Spray
the ADEZZ BIO cleaner/protector on the outside of the planter (100% biodegradable). This ensures all dirt is drawn out of the
pores. Rinse with clean tap water again. After this apply the ADEZZ BIO cleaner/protector again on the planter to protect your
planters against dirt.
Note! Do not use a high-pressure cleaner or abrasive sponge.
• Adezz maintenance products are available (page 5).
Important