Adjustable Comfort AFFORDAMATIC 2.0 User manual

ADJUSTABLE
COMFORT
AFFORDAMATIC 2.0
ASSEMBLY INSTRUCTIONS

ADJUSTABLE
COMFORT
ASSEMBLY INSTRUCTIONS
STEP 1: Carefully open the carton and remove
all boxes then lay out the top and the bottom
of the base as one unit as shown. Cut all zip
ties and remove.
STEP 2: To attach the corner bed legs, rotate
the end bolts into the holes in the corner
brackets.
STEP 3: Put remaining legs on the base and
tighten. When ready to flip the base over, make
sure you do not use the legs as leverage as they
may damage the legs and/or base.
STEP 4: Insert the mattress retainer bar into
the grommets as shown.
For customer service call 1-877-707-7533
or email [e-mail]
SYNCING ONE REMOTE:
Each base comes factory synced to its own remote. If not
synced follow these instructions:
Step 1: On the remote press and hold the “head down” button
and the “foot up” button at the same time for 10 seconds
Step 2: Push the button on the side of the control box under-
neath the bed where it indicates reset coding. Do not press
and hold the side button, just press and release.
Step 4: Once you hear a beep that will indicate that the
remote is synced