Adjustable Comfort Posture+ User manual

For customer service call: 1-877-707-7533 1
User Manual
Posture+ Adjustable Base

For customer service call: 1-877-707-7533 2
IMPORTANT INFORMATION
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT. PROPER OPERATION OF
YOUR ADJUSTABLE BED IS NECESSARY TO ENSURE THE LONG LIFE AND DURABILITY YOU EXPECT FROM A
HIGH-QUALITY PRODUCT.
1. Electrical Safety
Please ensure you connect the base properly to the power supply. Any incorrect power connection may cause electric shock or fire.
FOR OPTIMAL SAFETY, YOUR ADJUSTABLE BED SHOULD BE PLUGGED INTO A SURGE PROTECTOR (not supplied with this
adjustable bed). Always unplug this adjustable bed frame from the electrical outlet before any cleaning or maintenance of the bed
frame. To safely disconnect, remove the plug from the outlet. Keep cord away from heated surface.
2. Moving Parts
Keep body parts clear of all moving parts to avoid injury while the product is in use. Keep moving parts clear of obstruction during
operation.
3. Indoor Use Only
This adjustable bed is designed exclusively for indoor use only.
4. Small Children and Pets Warning
This product is designed to be used by an adult. Children should not be allowed to operate this bed without adult supervision.
Immediately dispose of all packing materials as they can pose a smothering risk to small children and pets. Injury could occur if
children or pets are permitted to play on or under the bed.
5. Lubrication and Cleaning
This product is designed to be maintenance free. The lift motor(s) are permanently lubricated and sealed-no additional
lubrication is required. Do not apply lubricant to lift motor screws or any nylon nuts or the base may inadvertently shift
downward from the elevated position.
6. Lift Warning
Do not sit on the head or foot sections of the base while in the raised position or during lift or lowering cycles.
7. Moving After Installation
Do not place adjustable bed base vertically on its head or foot sections. This may cause injury to persons or damage to the base.
It is recommended that two or more people move this base due to its heavy weight.
8. Important Warranty Information
This bed is specifically designed to be maintenance free. Any opening or tampering with the control box, motor or hand controls (with
the exception of the battery compartment, if equipped) will void the warranty. Do not attempt to alter component wiring or adjust or
modify the structure of the product in any way or the warranty will be void. Only those authorized may conduct repairs or replace
parts on your adjustable bed.

For customer service call: 1-877-707-7533 3
Contents
Unpacking and Assembling Your Base:......................................................................................................... 4
Attaching the Legs to the Base: .................................................................................................................... 4
Inserting the Mattress Retention Bar:.......................................................................................................... 5
Using the Remote Control: ........................................................................................................................... 6
Synching Two Twin XL Bases: ....................................................................................................................... 7
Troubleshooting: .......................................................................................................................................... 8
Warnings:...................................................................................................................................................... 9
Warranty:.................................................................................................................................................... 10

For customer service call: 1-877-707-7533 4
Unpacking and Assembling Your Base:
1. Open the carton box. Layout the bed frame other as shown below.
2. Open all the leg boxes and cut the zip ties. Please note: Number of part boxes may
vary depending on the manufacturer.
Attaching the Legs to the Base:
1. Locate the box containing the bed legs, tighten the 4 corner legs as shown.
Adjustable Leg Height
Three Different Leg Heights to Fit Most Bed Frames
3 Inches, 6 Inches, and combined for 9 inches
3"
6"
9"
Corner Legs (4 PCS)
Corner Leg Bolts (4 PCS)

For customer service call: 1-877-707-7533 5
Inserting the Mattress Retention Bar:
1. Flip over the base taking extra care not to damage the legs. It is recommended that
because of the weight of the base that two people flip it over to prevent any injury.
2. Insert the mattress bar as shown:
Please note: The mattress retention rail is not to be used to lift the base.