Adorama SLIDGO GO-X8 User manual
SLIDGO GO-X8
Folding E-scooter
User Manual
About the manual Content
●
Congratulations on your purchase of the E-scooter.
●
For your riding Safety, please read this user manual carefully before using
●
Learning all the safety warning and tips listed in this manual are essential
●
Please note "warnings“ and "tips" below prior to using
Warnings: Improper operation may result in personal injury.
Tips: Helpful advice & clues for the usage of E-scooter.
●
Should you have any concerns, please contact the supplier immediately.
●
Fully charge the battery for 12 hours before first use
Tips:
A.
Children below 14 years old should be accompanied by an adult.
B.
Please start the scoter in the slowest speed to ensure you are comfortable with the controls and feel of the
scooter
C.
Please read this manual carefully before you ride the electric scooter
D.
Be sure to follow the cleaning and maintenance guide after each use
WARNING!
IMPROPER USE OF THE SCOOTER AND/OR FAILURE TO READ THIS USER MANUAL MAY
LEAD TO SERIOUS BODILY INJURY. SELLER WILL TAKE NO RESPONSIBILITY FOR ANY INJURIES CAUSED
BY IMPROPER OR CARELESS USE.
1.
Safety Notes................................................................................................... 3-5
2.
Product Introduction .......................................................................................6-10
3.
How to ride ......................................................................................................11-12
4.
Battery Instruction ..........................................................................................13-14
5.
Parameter..................................................................................................... 15
6.
Maintenance ................................................................................................. 16
7.
Trouble shooting ............................................................................................17
8.
Packing List ..................................................................................................... 17
9.
Product Quality Certificate..............................................................................18
10.
Product Warranty Card .................................................................................. 18
-01- -02-
About the manual Content
●
Congratulations on your purchase of the E-scooter.
●
For your riding Safety, please read this user manual carefully before using
●
Learning all the safety warning and tips listed in this manual are essential
●
Please note "warnings“ and "tips" below prior to using
Warnings: Improper operation may result in personal injury.
Tips: Helpful advice & clues for the usage of E-scooter.
●
Should you have any concerns, please contact the supplier immediately.
●
Fully charge the battery for 12 hours before first use
Tips:
A.
Children below 14 years old should be accompanied by an adult.
B.
Please start the scoter in the slowest speed to ensure you are comfortable with the controls and feel of the
scooter
C.
Please read this manual carefully before you ride the electric scooter
D.
Be sure to follow the cleaning and maintenance guide after each use
WARNING!
IMPROPER USE OF THE SCOOTER AND/OR FAILURE TO READ THIS USER MANUAL MAY
LEAD TO SERIOUS BODILY INJURY. SELLER WILL TAKE NO RESPONSIBILITY FOR ANY INJURIES CAUSED
BY IMPROPER OR CARELESS USE.
1.
Safety Notes................................................................................................... 3-5
2.
Product Introduction .......................................................................................6-10
3.
How to ride ......................................................................................................11-12
4.
Battery Instruction ..........................................................................................13-14
5.
Parameter..................................................................................................... 15
6.
Maintenance ................................................................................................. 16
7.
Trouble shooting ............................................................................................17
8.
Packing List ..................................................................................................... 17
9.
Product Quality Certificate..............................................................................18
10.
Product Warranty Card .................................................................................. 18
-01- -02-
43
1 SafetyNotes
1.1
About safety
There's risk for any vehicle, including e-scooter. For your safety, please learn to ride safely and obey the
local
rules
Please check if the tire is damaged all connections are tight and secure.
Any conversion of the scooter is prohibited as it will change its performance or damage the structure
. This will
void your warranty and may cause injury.
Please do not operate your scooter if it has been immersed or with water
. This may cause damage to the electrical
system and braking mechanism.
1.2
Safety Precautions
To
avoid injury, you should be familiar with this manual and keep the scooter in good condition.
DO NOT ride with two or more people.
Baby
DO NOT ride if pregnant.
Wine
-03-
Safety equipment should include, helmet,
knee and elbow pads kneecap, elbow pads
and so on
.
DO NOT ride when it rains.
Max Load 250 Lbs.
DO NOT ride after drinking or taking
medicine.
-04-
43
1 SafetyNotes
1.1
About safety
There's risk for any vehicle, including e-scooter. For your safety, please learn to ride safely and obey the local
rules
Please check if the tire is damage d all connections are tight and secure.
Any conversion of the scooter is prohibited as it will change its performance or damage the structure. This will
void your warranty and may cause injury.
Please do not operate your scooter if it has been immersed or with water. This may cause damage to the electrical
system and braking mechanism.
1.2
Safety Precautions
To
avoid injury, you should be familiar with this manual and keep the scooter in good condition.
DO NOT ride with two or more people.
Baby
DO NOT ride if pregnant.
Wine
-03-
Safety equipment should include, helmet,
knee and elbow pads kneecap, elbow pads
and so on
.
DO NOT ride when it rains.
Max Load 250 Lbs.
DO NOT ride after drinking or taking
medicine.
-04-
65
2 Production Introduction
2.1
Overall View
Brake Accelerator / Throttle
Handle
Headlight
LED Display
Hook
Battery cover lock
DO NOT call or listen to music when you ride the e-scooter.
Be aware of your surroundings and avoid sudden
inclines, loose gravel, mud, snow, wet patches, and
uneven pavement
Lever
Folding ring
Battery
Charging port
Folding spanner
-05-
Avoid construction zones
DO NOT use on highways
Motor
Kickstand
Disc brake
Anti-slip pedal
Fender
Tail lights
-06-
65
2 Production Introduction
2.1
Overall View
Brake Accelerator / Throttle
Handle
Headlight
LED Display
Hook
Battery cover lock
DO NOT call or listen to music when you ride the e-scooter.
Be aware of your surroundings and avoid sudden
inclines, loose gravel, mud, snow, wet patches, and
uneven pavement
Lever
Folding ring
Battery
Charging port
Folding spanner
-05-
Avoid construction zones
DO NOT use on highways
Motor
Kickstand
Disc brake
Anti-slip pedal
Fender
Tail lights
-06-
87
Brake hand bar
Function button
2.2
Pre-assembly instructions
LED Display
Power switch
Speed
Fault display Multifunction
Gear
Instructions of Buttons
Throttle button Power
LED display
The unit display
1.
Pull up the lever while pressing
down the rear wheel fender.
2.
Fasten the folding spanner and
use the folder fixing ring to fix the
folder wrench.
3.
Fix the brake lever with M5
hex wrench.
4.
Tighten handlebars (Pay attention
to the direction of rotation when
tighten).
-07-
1.
Power Switch: Long press the power button to turnon/off.
2.
Function key:
A: Short press function key: Cycle to switch gears.
Beginner mode: Gear indicator is not displayed.
Normal mode: Gear indicator shows white.
Sports mode: Gear indicator shows red.
B: Shortly press the function key twice to turn on/off the headlights, and the taillights are always on.
3.
Accelerator: Press the acceleration button to start andaccelerate.
4.
Brake: Hold the brake handle to brake. Lightly step on the rear fender to assist the brakes.
5.
Cruise mode: Keep the current speed for 6 seconds to enter the cruise mode;
Exit the cruise mode when pressing accelerator again or brake.
5.
Adjusting the folding nut
properly according to the
shaking situation of lever.
-08-
87
Brake hand bar
Function button
2.2
Pre-assembly instructions
LED Display
Power switch
Speed
Fault display Multifunction
Gear
Instructions of Buttons
Throttle button Power
LED display
The unit display
1.
Pull up the lever while pressing
down the rear wheel fender.
2.
Fasten the folding spanner and
use the folder fixing ring to fix the
folder wrench.
3.
Fix the brake lever with M5
hex wrench.
4.
Tighten handlebars (Pay attention
to the direction of rotation when
tighten).
-07-
1.
Power Switch: Long press the power button to turnon/off.
2.
Function key:
A: Short press function key: Cycle to switch gears.
Beginner mode: Gear indicator is not displayed.
Normal mode: Gear indicator shows white.
Sports mode: Gear indicator shows red.
B: Shortly press the function key twice to turn on/off the headlights, and the taillights are always on.
3.
Accelerator: Press the acceleration button to start andaccelerate.
4.
Brake: Hold the brake handle to brake. Lightly step on the rear fender to assist the brakes.
5.
Cruise mode: Keep the current speed for 6 seconds to enter the cruise mode;
Exit the cruise mode when pressing accelerator again or brake.
5.
Adjusting the folding nut
properly according to the
shaking situation of lever.
-08-
109
2.3
Folding chart
2.4
How to uninstall / installthe battery
Disassembly
1.
Loosen the folder fixing ring. 2.Open the folder wrench.
3.
Fold the pole and fix the wrench.
1.
Pull the lock on the
battery case.
2.
Push the battery up
from the bottom.
3.
After pushing the
battery up,then pull
it out horizontally.
Install
4.
Gently press down to hook.
1.
Insert the battery
horizontally into the
pole.
2.
Push down until the
lock latch of the battery
box is tightened.
-09- -10-
109
2.3
Folding chart
2.4
How to uninstall / installthe battery
Disassembly
1.
Loosen the folder fixing ring. 2.Open the folder wrench.
3.
Fold the pole and fix the wrench.
1.
Pull the lock on the
battery case.
2.
Push the battery up
from the bottom.
3.
After pushing the
battery up,then pull
it out horizontally.
Install
4.
Gently press down to hook.
1.
Insert the battery
horizontally into the
pole.
2.
Push down until the
lock latch of the battery
box is tightened.
-09- -10-
1211
3 How to ride the scooter
Wear helmets and other protective
equipment before riding;
1.
Press the POWER button for 2 seconds.
4.
Press the throttle button slightly on your right
hand to start and rotate the handle to turn.
5.
Continuously press throttle to
speed up.
-11-
2.
Put one foot on the platform,
Push off the ground with your other foot.
3.
Balance both feet on your scooter
and enjoy your ride
.
6.
Grasp the brake handle to slow
down or stop.
7.
Safely dismount when the
scooter has come to a stop.
-12-
1211
3 How to ride the scooter
Wear helmets and other protective
equipment before riding;
1.
Press the POWER button for 2 seconds.
4.
Press the throttle button slightly on your right
hand to start and rotate the handle to turn.
5.
Continuously press throttle to
speed up.
-11-
2.
Put one foot on the platform,
Push off the ground with your other foot.
3.
Balance both feet on your scooter
and enjoy your ride
.
6.
Grasp the brake handle to slow
down or stop.
7.
Safely dismount when the
scooter has come to a stop.
-12-
1413
4 Battery Instruction
The instruction shows how to charge and maintain the battery, some safety notices and the specification. Please
use the battery properly according to this instruction to prolong the battery life and its performance.
4.1 Battery Parameters
4.3 Charging step
●
Open the charging port cover, Make sure the charging port is clean and dry.
●
Connect the charger with the battery and the other end with power (100V-240V;50/60Hz), make sure the charging
indicator is on.
●
When the charger indicator is red, it will charge normally. Otherwise, please check if the plug is connected properly.
●
When the charger indicator is green, charging is complete.
4.2 Battery Safety
Do not continue to use the battery when the following conditions occur:
The battery of the electric scooter should be used only with local law. Only for professionals to disassemble and maintain
the battery.
Odor or excessive heat; leak any substance; do not touch anything leaking from the battery.
Do not let children and animals touch the battery. Must unplug the charger before installing the battery or riding. In the
case of charging, it is very dangerous to do anything related to electric vehicles.
If you want the electric scooter to run most efficiently, the battery must be charged and used within the temperature range
indicated in the battery specifications.
Lithium batteries are considered dangerous and require local law to allow transportation.
The battery contains dangerous substances. Please do not open the battery. Do not insert anything into the battery.
Charging method:
Charging port
Tips:
Battery interface
-13-
It is forbidden to charge a lithium battery that has been over-discharged. A battery that has been over-discharged has
a safety hazard and can only be scrapped.
Tip: When the internal temperature of the battery exceeds 45 °C, the battery is protected.
Do not charge the battery at high temperature (45 ° C) or Charge the battery in a high temperature (40 ° C) environment. Only
use the original charging equipment to charge the electric scooter.
Connect the charger to the AC power firstly, then connect it to the battery when the green indicator light is
normally on.
After charging, cover the dustproof rubber to prevent something from entering the charging port and
causing battery failure.
-14-
Name
Parameter
Name
Parameter
Name
Parameter
Type Li-ion battery Working Temperature
0
℃-
35
℃
Store Time（-10℃-40℃） 3 months (full charge)
Charging Time 5-7 hours Charging Temperature
0
℃-
35
℃
Initial Volume 7.8Ah/10Ah
Voltage 36V Max Charging Voltage
42V
Max Charging Current 2A
1413
4 Battery Instruction
The instruction shows how to charge and maintain the battery, some safety notices and the specification. Please
use the battery properly according to this instruction to prolong the battery life and its performance.
4.1 Battery Parameters
4.3 Charging step
●
Open the charging port cover, Make sure the charging port is clean and dry.
●
Connect the charger with the battery and the other end with power (100V-240V;50/60Hz), make sure the charging
indicator is on.
●
When the charger indicator is red, it will charge normally. Otherwise, please check if the plug is connected properly.
●
When the charger indicator is green, charging is complete.
4.2 Battery Safety
Do not continue to use the battery when the following conditions occur:
The battery of the electric scooter should be used only with local law. Only for professionals to disassemble and maintain
the battery.
Odor or excessive heat; leak any substance; do not touch anything leaking from the battery.
Do not let children and animals touch the battery. Must unplug the charger before installing the battery or riding. In the
case of charging, it is very dangerous to do anything related to electric vehicles.
If you want the electric scooter to run most efficiently, the battery must be charged and used within the temperature range
indicated in the battery specifications.
Lithium batteries are considered dangerous and require local law to allow transportation.
The battery contains dangerous substances. Please do not open the battery. Do not insert anything into the battery.
Charging method:
Charging port
Tips:
Battery interface
-13-
It is forbidden to charge a lithium battery that has been over-discharged. A battery that has been over-discharged has
a safety hazard and can only be scrapped.
Tip: When the internal temperature of the battery exceeds 45 °C, the battery is protected.
Do not charge the battery at high temperature (45 ° C) or Charge the battery in a high temperature (40 ° C) environment. Only
use the original charging equipment to charge the electric scooter.
Connect the charger to the AC power firstly, then connect it to the battery when the green indicator light is
normally on.
After charging, cover the dustproof rubber to prevent something from entering the charging port and
causing battery failure.
-14-
Name
Parameter
Name
Parameter
Name
Parameter
Type Li-ion battery Working Temperature
0
℃-
35
℃
Store Time（-10℃-40℃） 3 months (full charge)
Charging Time 5-7 hours Charging Temperature
0
℃-
35
℃
Initial Volume 7.8Ah/10Ah
Voltage 36V Max Charging Voltage
42V
Max Charging Current 2A
1615
5 Specification
Item
10 inch
Product
Scooter Specification
Unfolded size
1083*420*1186mm
Folded size
1083*420*460mm
Height from pedal to ground
115mm
Net weight
15kg
Basic Information
Capacity
36V/7.8Ah or 10Ah
Moto power
36V/350W
Mileage per charge
30-45km
Max speed
20km/h
Max loading
100kg
Climbing angle
15°
Charger Specification
Input voltage
100-240Vac
Frequency
50-60Hz
Output voltage
42V
Output current
2A
Store temperature
-10℃-35℃
-15-
6 Maintenance
Maintenance considerations：
●
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
●
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
●
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
●
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
●
If the storage environment temperature is lower than 0
℃
, please don't charge electric scooter. Please put it in inside
environment temperature (above 10
℃
) and then charge, storage temperature is - 10
℃
to 35
℃.
●
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
●
In order to protect the user's safety, the user cannot take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
-16-
5 Specification
Item 10 inch
Product
Scooter Specification
Unfolded size
1083*420*1186mm
Folded size
1083*420*460mm
Height from pedal to ground
115mm
Net weight
15kg
Basic Information
Capacity
36V/7.8Ah or 10Ah
Moto power
36V/350W
Mileage per charge
30-45km
Max speed
20km/h
Max loading
100kg
Climbing angle
15°
Charger Specification
Input voltage
100-240Vac
Frequency
50-60Hz
Output voltage
42V
Output current
2A
Store temperature
-10℃-35℃
-15-
6 Maintenance
Maintenance considerations：
●
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
●
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
●
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
●
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
●
If the storage environment temperature is lower than 0
℃
, please don't charge electric scooter. Please put it in inside
environment temperature (above 10
℃
) and then charge, storage temperature is - 10
℃
to 35
℃.
●
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
●
In order to protect the user's safety, the user cannot take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
-16-
5 Specification
Item 10 inch
Product
Scooter Specification
Unfolded size
1083*420*1186mm
Folded size
1083*420*460mm
Height from pedal to ground
115mm
Net weight
15kg
Basic Information
Capacity
36V/7.8Ah or 10Ah
Moto power
36V/350W
Mileage per charge
30-45km
Max speed
20km/h
Max loading
100kg
Climbing angle
15°
Charger Specification
Input voltage
100-240Vac
Frequency
50-60Hz
Output voltage
42V
Output current
2A
Store temperature
-10℃-35℃
-15-
6 Maintenance
Maintenance considerations：
●
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
●
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
●
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
●
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
●
If the storage environment temperature is lower than 0
℃
, please don't charge electric scooter. Please put it in inside
environment temperature (above 10
℃
) and then charge, storage temperature is - 10
℃
to 35
℃.
●
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
●
In order to protect the user's safety, the user cannot take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
-16-
5 Specification
Item 10 inch
Product
Scooter Specification
Unfolded size
1083*420*1186mm
Folded size
1083*420*460mm
Height from pedal to ground
115mm
Net weight
15kg
Basic Information
Capacity
36V/7.8Ah or 10Ah
Moto power
36V/350W
Mileage per charge
30-45km
Max speed
20km/h
Max loading
100kg
Climbing angle
15°
Charger Specification
Input voltage
100-240Vac
Frequency
50-60Hz
Output voltage
42V
Output current
2A
Store temperature
-10℃-35℃
-15-
6 Maintenance
Maintenance considerations：
●
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
●
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
●
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
●
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
●
If the storage environment temperature is lower than 0
℃
, please don't charge electric scooter. Please put it in inside
environment temperature (above 10
℃
) and then charge, storage temperature is - 10
℃
to 35
℃.
●
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
●
In order to protect the user's safety, the user cannot take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
-16-
5 Specification
Item
10 inch
Product
Scooter Specification
Unfolded size
1083*420*1186mm
Folded size
1083*420*460mm
Height from pedal to ground
115mm
Net weight
15kg
Basic Information
Capacity
36V/7.8Ah or 10Ah
Moto power
36V/350W
Mileage per charge
30-45km
Max speed
20km/h
Max loading
100kg
Climbing angle
15°
Charger Specification
Input voltage
100-240Vac
Frequency
50-60Hz
Output voltage
42V
Output current
2A
Store temperature
-10℃-35℃
-15-
6 Maintenance
Maintenance considerations：
●
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
●
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
●
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
●
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
●
If the storage environment temperature is lower than 0
℃
, please don't charge electric scooter. Please put it in inside
environment temperature (above 10
℃
) and then charge, storage temperature is - 10
℃
to 35
℃.
●
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
●
In order to protect the user's safety, the user cannot take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
-16-
5 Specification
Item 10 inch
Product
Scooter Specification
Unfolded size
1083*420*1186mm
Folded size
1083*420*460mm
Height from pedal to ground
115mm
Net weight
15kg
Basic Information
Capacity
36V/7.8Ah or 10Ah
Moto power
36V/350W
Mileage per charge
30-45km
Max speed
20km/h
Max loading
100kg
Climbing angle
15°
Charger Specification
Input voltage
100-240Vac
Frequency
50-60Hz
Output voltage
42V
Output current
2A
Store temperature
-10℃-35℃
-15-
6 Maintenance
Maintenance considerations：
●
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
●
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
●
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
●
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
●
If the storage environment temperature is lower than 0
℃
, please don't charge electric scooter. Please put it in inside
environment temperature (above 10
℃
) and then charge, storage temperature is - 10
℃
to 35
℃.
●
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
●
In order to protect the user's safety, the user cannot take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
-16-
1615
5 Specification
Item 10 inch
Product
Scooter Specification
Unfolded size
1083*420*1186mm
Folded size
1083*420*460mm
Height from pedal to ground
115mm
Net weight
15kg
Basic Information
Capacity
36V/7.8Ah or 10Ah
Moto power
36V/350W
Mileage per charge
30-45km
Max speed
20km/h
Max loading
100kg
Climbing angle
15°
Charger Specification
Input voltage
100-240Vac
Frequency
50-60Hz
Output voltage
42V
Output current
2A
Store temperature
-10℃-35℃
-15-
6 Maintenance
Maintenance considerations：
●
Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
●
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you do the
maintenance for it.
Warning
●
It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage of the
electronic devices in the host.
Storage
●
Please charge your electric scooter before storage, for preventing the battery from discharging too long time. Please ensure
charge at least once every three months.
●
If the storage environment temperature is lower than 0
℃
, please don't charge electric scooter. Please put it in inside
environment temperature (above 10
℃
) and then charge, storage temperature is - 10
℃
to 35
℃.
●
Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric scooter
to prevent from the dust.
Warning
●
In order to protect the user's safety, the user cannot take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
-16-
1817
7 Trouble shooting
Please contact the sales office or the dealer with no hesitate for repair when the electric scooter fails to ride normally.
9 Product Quality Certificate
This product is qualified by passing QC inspection and allowed to be sold on the market
.
The warranty card It takes effect upon manufacturer’s seal and passing with serial number
)
regular sales invoice is
effective maintenance certificate
.
Please keep the warranty card properly
.
Release date
:
QC Qualified Seal
:
10 Product Warranty Card
User Files
8 Packing List
Electric scooter packing list：
E-scooter:
Charger:
Manual
Screws & Wrench: 1set
Please contact us with no hesitate if there is any breakage or missing when you open package. We will replace it for you as
soon as possible.
Have a nice day!
-17-
We shall provide warranty service due to non-artificial quality problems.
1. One year warranty to the main body including handlebar stem, Motor, Charger...
2. Battery is 6 months warranty period,
3. Plastic Decorative cover, rubble Handlebar, rear wheel is not in the scope of warranty.
4.AlI of damage by man—made (open the housing, tear off the sticker, unmorally using),or losing this card we will not
guarantee.
Description of adverse phenomena
Solution
unable starting up
Check to see if the battery is powered
cannot charge
1.
Check whether the plug board has electricity；
2.
Check the charger whether connect AC plug
(the light whether is on);
3.
Check the plug of the charger and the charging port
of the whole scooter have been inserted correctly.
No horn
、
no blue tooth signal
Check the Bluetooth switch whether turn on.
User Name
Sex
Age
Address
Telephone
Zip
Purchase Site
Purchase Price
Serial Number
Commodity And
Specifications
The User Signature
Dealers Signature
Table of contents
