ADOS-TECH IRVI Contour IR User manual
!
Contour IR
Infrared cameras
Manual
Content
Content 2.........................................................................................
Safety requirements 3......................................................................
About 4............................................................................................
Exposure and Sensitivity 4...............................................................
Operation 5......................................................................................
The Maintenance instruction 5.........................................................
Spectral sensitivity 7.......................................................................
Power density 8...............................................................................
Technical information 9....................................................................
Warranty 11......................................................................................
www.ir-viewers.com
2
Safety requirements
•The customer is responsible for light source safety while
using a camera as a standalone device or integrated into
system.
•The customer must consider protective measures if
necessary.
•While assembling or operating camera, do not stare at the
direct laser (or other source) light even with safety goggles.
•This device will not protect you from direct or high light
radiation. Use camera with caution and appropriate
attenuation
•Electrical safety requirements must be complied while
operating this device.!
www.ir-viewers.com
3
About
The near infrared CONTOUR-IR camera is designed for
observation, registration and recording radiation in near infrared
zone in 400-1700 nm spectral region emitted by infrared sources
such as GaAs IR LED, diode or solid-state lasers as well as for
use in infrared microscopy, infrared luminescence, examination
of documents, forensics, art restoration and etc.
The camera is based on a high-sensitive low-noise silicon CCD
sensor and two-photon absorption phenomenon. Superior image
quality is obtained with micro lens system and special coating
layer on a silicon.
Exposure and Sensitivity
It has four-stage automatic gain system. Exposition time
depends from the level of light exposure within the range from 10
µs up to 20 ms. The sensitivity of the camera increases
automatically.
For low power infrared illumination observation decrease any
external light background to increase noise to signal contrast.
Use cut-off or interference filters for better contrast.
www.ir-viewers.com
4
Operation
CAUTION! Do not use direct laser radiation on a sensor.
CAUTION! Use the attenuators and beam splitters to decrease
of laser radiation.
On the panel of the camera (Fig. 1) are:
1. Socket for power input 12V, 5.0 х2.1mm plug.
2. Video output.
3. Objective with IR cut-off filter.
4. Tripod connection ¼inch
The Maintenance instruction
•Keep device away from mechanical damage and moisture.
•Protect the lenses from dirt. If necessary, clean them with
clean soft cloth; remove oiled spots or deposit with cotton
wool slightly wetted in alcohol.
•Use stabilised certified AC/DC 110-220V/12V adapter (not
included).!
www.ir-viewers.com
5
Technical information
Spectral sensitivity
400-1700nm
Sensor size
1/3 inches, 6.0mm x
4,96mm
Max. resolution
570 TV lines
Resolution at max.
Sensitivity
135 TV lines
Lens
F1.4/26mm, CS-mount
Field of view
10°
Focusing range
0.2m (or 0.1m)* to inf
Ratio signal-to-noise
48 dB
Gamma
0.45
Video output
CCIR Standart composite
video
Range of exposure
10µs - 20ms
Power supply
DC 10… 14V, 150mA
Temperature range
+5… +40°C
Weight
0,23 kg
Dimensions
50x58x90 mm
* with distance ring
www.ir-viewers.com
9
Standard kit includes:
•IR camera;
•distance ring;
•IR cut-off filter;
•manual;
•case.
Accessories available upon request;
•Iris diaphragm
•Neutral density filter for lens 1X(3-5% @ 1064nm)
•Neutral density filter for lens 2X(3-5% @ 1064nm)
•Microscope adapter
•Lens 2X (F1.8/50mm)
•Lens 1X(F1.4/26mm)
•Distance ring
•C-mount ring for any CCD lenses!
www.ir-viewers.com
10
Warranty
Infrared viewing device CONTOUR-IR meets specifications of
the manufacturer and declared operation.
The warranty period of the device is 24 months from the date it
was sold to the consumer.
Claims not accepted, and warranty repair are not made,
because of the improper use or incorrect service and
maintenance of product instructions. The company shall not
accept warranty claim:
- non-authorised alteration,
- disassembling device,
- mechanical or any external damages,
- if 2 year warranty term has expired.
Serial No.
Version No.
Spectral range
Date of Issue
www.ir-viewers.com
11
Other manuals for IRVI Contour IR
2
Table of contents
Other ADOS-TECH Thermographic Camera manuals
