ADS Technologies Instant Music RDX-150 User manual

User Guide
Nero SoundTrax
Ahead Software AG

Information on copyright and trade marks
The Nero SoundTrax user manual and all its contents are protected by copyright
and are the property of Ahead Software. All rights reserved. This user manual
contains material that is protected by internationally valid copyright. This manual
may not - in whole or in part - be copied, transmitted or otherwise reproduced
without the express written permission of Ahead Software AG.
All trade names and trademarks are the property of the respective owners.
Ahead Software rejects any claims that transcend the legal guarantee rights.
Ahead Software AG does not undertake any liability for the correctness of the
content of the Nero SoundTrax user manual. The contents of the software
supplied, as well as of the Nero SoundTrax user manual, may be changed
without prior warning.
The trademarks mentioned here are only listed for information purposes.
Copyright © 2003 Ahead Software AG
REV 1.0

Nero SoundTrax Contents •3
Contents
1Information about Nero SoundTrax ................................................. 4
1.1 Nero SoundTrax ............................................................................... 4
2Working with Nero SoundTrax ......................................................... 6
2.1 Inserting an audio file ...................................................................... 6
2.2 Creating crossfades....................................................................... 10
2.3 Buttons............................................................................................ 11
2.4 Recording audio clips.................................................................... 12
2.5 Wizards ........................................................................................... 14
2.5.1 Recording from records.................................................................... 14
2.5.2 Recording from cassettes................................................................. 18
3Index................................................................................................. 22

Nero SoundTrax Information about Nero SoundTrax •4
1 Information about Nero SoundTrax
1.1 Nero SoundTrax
Nero SoundTrax is a professional program for the production of audio CDs.
Using Nero SoundTrax you can:
 Record audio clips
 Add your own audio material
 Mix different audio clips
 Add audio effects and crossfading
 Write your audio project to a CD without leaving Nero SoundTrax, as Nero
SoundTrax uses the Nero API.
Instead of simply putting audio files together on a CD as you have in the past,
you now have the option of mixing or changing the contents of the audio files. Of
course, you can also create tracks, set index marks and insert pauses.
Using the integrated Karaoke filter, you can remove the vocals from songs and
add your own rendition of the vocals. You can then write the results to CD and
amaze your friends.
Last but not least, Nero SoundTrax allows you to create complex music
productions using several audio tracks, which can be played at the same time to
produce a new file on CD.
Nero SoundTrax is seamlessly integrated with Nero Wave Editor, which means
that all the audio effects available in Nero Wave Editor can also be used in Nero
SoundTrax. The effects range from the echo in studio quality recordings to
amusing voice modifications. Additional audio effects, which are available as
DirectX or VST plug-ins, can be added to Nero SoundTrax, if the large range of
existing effects does not fulfill all your requirements.
You can export or import audio clips in all the formats supported by Nero. Nero
SoundTrax also allows you to cut and loop the clips. If you want to make more
extensive changes, you can open Nero Wave Editor simply by double-clicking
and use its fine tuning functions. After you close Nero Wave Editor, the changes
are checked and the file is immediately imported into Nero SoundTrax.

Nero SoundTrax Information about Nero SoundTrax •5
You can create gentle crossfades between clips by dragging the clips over one
another and blending them to make one song. You can choose between different
types of crossfading and even stretch the length of a clip, if this produces a better
rhythmical crossfade. Both Nero SoundTrax and Nero Wave Editor are non-
destructive which means that all the processes can be carried out very quickly,
and the results cancelled or repeated as often as you want to, without
overloading your hard disk.
The preparations for burning the audio CD are made in the project window itself.
In the same way as you add clips to a project, you can also include tracks, index
marks or pauses. You can add the title and artist information by double-clicking
and when you're happy with the results, you simply click on the burn button in the
toolbar to start the process of burning the CD. It's as easy as using Nero itself,
because Nero SoundTrax is based on the revised burn engine of Nero 6.0,
which burns error-free CDs quickly, and easily.
The Nero SoundTrax wizards are automated processes, which allow you to
carry out frequent tasks such as copying records or audio-cassettes onto CD
quickly and easily. The wizard guides you through the individual steps in the
process, from recording right through to burning the CD. Tracks are identified
automatically and separated from one another. The wizard also automates the
noise reduction feature from Nero Wave Editor and cleans up the recording
automatically. This allows you to remove hissing, crackling, clicks and pops in a
matter of seconds.

Nero SoundTrax Working with Nero SoundTrax •6
2 Working with Nero SoundTrax
2.1 Inserting an audio file
1. Start Nero SoundTrax by clicking on Start > Programs > Ahead Nero > Nero
SoundTrax.

Nero SoundTrax Working with Nero SoundTrax •7
2. From the 'Insert' menu, choose 'Audio File' and select a file. The file is inserted
in the first track.
3. From the 'Insert' menu, choose 'New Track' and a new track will be created.

Nero SoundTrax Working with Nero SoundTrax •8
4. Select the second track, and from the 'Insert' menu, choose 'Audio File' and
select a file. The file is inserted in the second track. Depending on the
positions of the different clips, a range of options is available. In the example
below, the clips are played at the same time.
5. To change the starting position of a clip, select the clip and drag it to the
position where you want it to start.

Nero SoundTrax Working with Nero SoundTrax •9
6. If you right-click on a clip, a pop-up menu appears, which, amongst other
things, allows you to open Nero Wave Editor, so that you can modify the clip
quickly and easily.
7. If you are happy with the results, you can export the new track, which consists
of two clips, and save it as a new file. To do this, choose 'Export to Audio
Track' from the 'File' menu, enter the name of the new file in the dialog box
which appears and click on the 'Save' button.
You can also create more than two tracks.

Nero SoundTrax Working with Nero SoundTrax •10
2.2 Creating crossfades
1. Start Nero SoundTrax and insert two clips in one track, by choosing 'Audio
File' from the 'Insert' menu. In the example below, the two clips are played one
after another and between the end of the first clip and the start of the second
clip is a pause.
2. Select the second clip and drag it as far as you want into the first clip. The
area where the two clips overlap is colored in red.

Nero SoundTrax Working with Nero SoundTrax •11
3. Place the mouse pointer on the overlap between the two clips and right-click.
In the pop-up menu which appears, choose the method you want to use for
crossfading between the two clips.
As well as choosing the crossfade, you can also match the tempo of the two
clips. Choose the 'Match Tempos' command, choose the number of BPM (beats
per minute) and select the option you want for the crossfade.
2.3 Buttons
The play buttons in the Nero SoundTrax interface allow you to access your
audio clips quickly and easily.
Button Function
Starts the recording console
Plays the selected clips
Plays all clips
Plays all the selected clips and starts again at the beginning of the
selection once it has reached the end. This continues until you click
the Stop button.
Stops playing.
Jumps to the previous clip

Nero SoundTrax Working with Nero SoundTrax •12
Fast forward
Fast rewind
Jumps to the next clip
2.4 Recording audio clips
1. Choose 'Record' from the 'Audio' menu to start the recording console. Enter a
name for the file you want to create and specify whether you want to record
the clip in stereo and what the resolution should be.
2. Choose the input device for the clips and click on the button to start the
recording.

Nero SoundTrax Working with Nero SoundTrax •13
3. Click on the 'Keep' button to accept the recording and close the dialog box.
The clip is automatically imported into the project and displayed in the project
window.

Nero SoundTrax Working with Nero SoundTrax •14
2.5 Wizards
The Nero SoundTrax wizards allow you to take music from records and
cassettes and burn it quickly and easily onto CD. The integrated filters help you
to make the best of your recordings, for example if there are scratches on the
record.
2.5.1 Recording from records
1. Choose 'Wizards' from the 'Tools' menu and select 'LP to CD Wizard' to start
the recording console.
2. Choose the input device by clicking on the button on the dropdown list and
selecting the device. Specify the input level for the recording by moving the
slider. You can obtain the best quality recording by keeping the recording level
mainly in the yellow area. Click on the red record button to start recording.

Nero SoundTrax Working with Nero SoundTrax •15
3. Choose the maximum noise level in the pauses between the tracks, by turning
the 'Silence Threshold' knob to the required number of decibels. Choose the
minimum duration of pauses between the tracks and tracks themselves by
entering a value in the corresponding field. Then click on the 'Detect' button to
divide the recording into different tracks using the settings you have selected.
4. Use the sliders to specify the level of the noise suppression filter (Denoiser),
the scratch removal filter (Declicker) and the crackle removal filter
(Decrackler). Click on the 'Preview' button to play the recording and see if you
are happy with the results.

Nero SoundTrax Working with Nero SoundTrax •16
5. Finally define which action(s) are to be carried out and click on the ‘Finish’
button to start these actions and close the window.
Highlight the required checkbox if files are to be burnt and/or Nero Cove
r
Designer is to be started.
Open a window in which the burn settings are
selected.
Start the Nero Cover Designer.
Highlight the required options field according to whether you want a pause
between tracks or whether you want tracks to crossfade. Both options allow you
to specify the relevant length in seconds and milliseconds.
This pastes a pause in between the tracks.
Enables crossfading of tracks.

Nero SoundTrax Working with Nero SoundTrax •17

Nero SoundTrax Working with Nero SoundTrax •18
2.5.2 Recording from cassettes
1. Choose 'Wizards' from the 'Tools' menu and select 'Cassette to CD Wizard' to
start the recording console.
2. Choose the input device by clicking on the button on the dropdown list and
selecting the device. Specify the input level for the recording by moving the
slider. You can obtain the best quality recording by keeping the recording level
mainly in the yellow area. Click on the red record button to start recording.

Nero SoundTrax Working with Nero SoundTrax •19
3. Choose the maximum noise level in the pauses between the tracks, by turning
the 'Silence Threshold' to the required number of decibels. Choose the
minimum duration of pauses between the tracks and tracks themselves by
entering a value in the corresponding field. Then click on the 'Detect' button to
divide the recording into different tracks using the settings you have selected.

Nero SoundTrax Working with Nero SoundTrax •20
4. Use the slider to specify the level of the noise suppression filter (Denoiser).
Click on the 'Preview' button to play the recording and see if you are happy
with the results.
5. Finally define which action(s) are to be carried out and click on the ‘Finish’
button to start these actions and close the window.
Highlight the required checkbox if files are to be burnt and/or Nero Cove
r
Designer is to be started.
Open a window in which the burn settings are
selected.
Start the Nero Cover Designer.
Highlight the required options field according to whether you want a pause
between tracks or whether you want tracks to crossfade. Both options allow you
to specify the relevant length in seconds and milliseconds.
This pastes a pause in between the tracks.
Enables crossfading of tracks.