Advance Tabco SU-16 Installation instructions

CHECK FOR CONCEALED DAMAGE
FILE CLAIM WITH DELIVERING FREIGHT CARRIER
Disassembly Instructions For Cleaning
SU-16/SU-16UM Glass Rinsers

Dirty glasses should never be rinsed by a glass rinser. Glasses
should always be washed, rinsed and sanitized in a glass
washing machine or manually in a 3-4 bay sink prior to using the glass
rinser. This prevents the spread germs and/or viruses and prevents
debris from collecting/clogging the glass rinser pan or drain.
STEP 1:
Remove the outer grate:
Using a small screwdriver, gently
pry out the outer grate. Do not
force to prevent bending of the
grate (Figure 1).
Disassembling The SU-16/SU-16UM Glass Rinser
2
IMPORTANT - PLEASE READ
(Figure 1)

STEP 4:
Clean with proper cleaning/
sanitation products (Figure 4).
Reverse steps to reassemble.
NOTE: Be sure to activate and
rinse a few times to remove
extra chemicals and cleaning
agents.
STEP 2:
Remove the inner grate:
Place s small screwdriver through
a hole in the grate, into the drain
hole of the rinser to hold the
grate in place and prevent it from
spinning (Figure 2).
STEP 3:
While holding the screwdriver in
position, use a 18 mm or 3/4”
adjustable wrench to turn the
spray head counter-clockwise to
loosen and remove (Figure 3).
3
(Figure 2)
(Figure 3)
(Figure 4)

Hauppauge, New York 11788 ©ADVANCE TABCO SEPTEMBER 2021
For Further Assistance
Contact Customer Service at:
800-645-3166
or
[email protected]