Advantage 15721000 User manual

Bagless Cyclone Back Pack
Vacuum Cleaner
Instruction Manual
Model 15721000 & 15721000 GL Export
CAUTION - read this Instruction Manual
before using the machine.
read this Instruction Manual.
.
Manufactured
Rugged Industries Pty Ltd
E: [e-mail]
P: [phone]
33 Antoine Street
Rydalmere NSW 2116 Australia
www.ruggedindustries.com.au

Pg 1
TABLE of CONTENTS
No Topic Pg No Topic Pg
1 MODELS 1 11 CLEANING THE MOTOR FILTER 7
2 GUIDE TO YOUR MACHINE 1 12 CARRYING AND CORD STORAGE 7
3 GENERAL ARRANGEMENT 2 13 TROUBLE SHOOTING GUIDE 8
4 GENERAL SAFETY INSTRUCTIONS 3 14 SPECIFICATIONS 8
5 ASSEMBLING YOUR MACHINE 4 15 PARTS DIAGRAM 9
6 ADJUSTING AND WEARING 4 16 PARTS LIST 10
7 VACUUMING APPLICATIONS 5 17 WIRING DIAGRAM 10
8 ONBOARD CONVENIENCE 6 18 ADVANTAGE WARRANTY 11
9 EMPTYING THE BIN 6 19 WARRANTY REGISTRATION 11
10 CLEANING THE BIN 7
1. MODELS
Part No. Description Country of Use
15721000 Advantage Australia, New Zealand
15721000 GL Advantage 220 V a.c. IEC countries
2. GUIDE TO YOUR MACHINE
1
Button Bin Release
20
Housing Motor Assembly
2
Handle
21
Switch ON/OFF
3
Lever Lock
22
Tool Holder
4
Carabiner
23
Pad Waist
5
Inlet
24
Pad Back
6
Poppet Valve
25
Pad Shoulder
7
Hinge
26
Hose Assembly
8
Cord Coupling
27
Cord Extension
8A
Cord Coupling IEC
28
Bent End Piece
9
Power Inlet
29
Suction Regulator
10
Socket Extension Cord
30
Wands 2 Piece
11
Cord Restraint
31
Dusting Brush
12
Exhaust
32
Upholstery Tool
13
Lid Bin
33
Tool Caddy
14
Grommet IEC
34
Floor Tool EZ2GO
15
Tank Assembly
35
Crevice Tool
16
Lever Bin Release
36
Combination Floor Tool (Optional)
17
Lid Bin Catch
37
Turbine Brush (Optional)
18
Cover Filter
38
Duster Microfibre
19
Filter Motor

Pg 2
1
3
11
13
6
2
8
4
18
17
16
15
19
27
20
20
7
10
21
0
3. GENERAL ARRANGEMENT
9
12
11
7
8A
Model 15721000 GL
10A, 14
9
12
13
22
20
0
23
0
0
24
25
28
29
30
34
31
32
33
35
37
38
26
5
36

Pg 3
4. GENERAL SAFETY INSTRUCTIONS
Read this manual and follow the instructions before using the machine.
1. This machine is intended for commercial use, for example in hotels, schools, hospitals, factories, shops, offices, and
Rental Businesses.
2. This machine can be used for domestic use.
3. Warning. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
4. Warning. (Europe) This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
5. Warning. (Europe) Cleaning and user maintenance shall not be made by children without supervision
6. Warning. Children should be supervised to ensure that they do not play with the appliance.
7. Warning. This machine is for dry use only.
8. Warning. This machine is not suitable for picking up hazardous dust.
9. Warning. Do not leave unattended when it is plugged into the electricity supply.
10. Warning. Do not unplug with wet hands.
11. Warning. Do not pull on cord to unplug.
12. Warning. Do not pull or carry by cord.
13. Warning. Keep cord away from heated surfaces
14. Warning. Do not use to vacuum flammable, combustible, explosive, toxic or dangerous substances, or use in areas
where they may be present.
15. Warning. Do not vacuum anything that is burning such as cigarettes, matches or hot ash
16. Warning. If the appliance is not working, has been dropped, damaged, left outdoors, or dropped into water, return it
to Rugged Industries Pty Ltd or authorized Service Agent for service
17. Warning. Do not hose down internal parts of the machine.
18. Warning. Switch OFF and unplug from electricity supply when not in use and before cleaning or servicing.
19. Caution. This machine is for indoor use only.
20. Caution. This machine shall be stored indoors only.
21. Caution. Do not leave this machine in the sun.
22. Caution. Use only with approved extension cord.
23. Caution. Ensure that cord is not jammed or trapped during vacuuming. Extend the cord completely but do not
stretch or tug on the cord.
24. Caution. With the extension cord unplugged, wind cord from machine end to prevent cord knuckling, and drape over
the frame for storage.
25. Caution. Do not vacuum hard objects such as glass, gravel, and metal objects.
26. Caution. Fine dust such as powders, chalk dust can only be vacuumed in small amounts. Do not vacuum large
powder spills.
27. Caution. Do not put any objects into openings.
28. Caution. Do not use with any openings blocked.
29. Caution. Do not fill past “Max” level marked on the Bin Wall. DO NOT OVER FILL
30. Caution. Do not vacuum plastic bags or large paper objects that block the mesh filter.
31. Caution. Use Duster provided to remove fluff, hair, lint, or anything that reduces air flow off the Mesh Filter.
32. Caution. Vacuum Motor Filter after emptying bin to prevent air flow loss.
33. Caution. Do not use with Tank Assembly detached from Motor Housing Assembly, or without filters in place.
34. Caution. Use only with Rugged Industries recommended parts and attachments
35. Caution. This machine has been fitted with a suction relief Poppet Valve, which activates on hose or nozzle
blockage. In the event of any blockage, turn the machine OFF, and clear the blockage before restarting.
36. Caution. Advantage has been fitted with a safety thermostat that will automatically SHUT DOWN the machine in the
event of hose blockage or clogged filter. In the event of SHUT DOWN turn the power OFF at the machine, clear the
blockage and clean the filter. The thermostat will reset in approximately 15 minutes.
37. Caution. Do not use detergents, cleaning agents, polish for cleaning any part of the Advantage vacuum cleaner
38. Caution. Transport the Advantage in the upright position only.
SAVE THESE INSTRUCTIONS

Pg 4
5. ASSEMBLING THE MACHINE
1Each machine is supplied with 2 x stainless steel metal wands, 1 x Hose Assembly, 1 x EZ2GO Floor Tool,
1 x Dusting Brush, 1 x Upholstery Tool, 1 x Tool Caddy, 12 x Motor Filters. 1 Motor Filter is fitted, and the other is
positioned behind the Tank as a spare. An additional two packets of 5 are included for spare replacement.
2The machine is configured for right handed operators. You can change to left handed configuration by turning the
tank assembly 180°. Release the Tank Lock at the top of the machine to change configuration or to remove the tank.
3Insert Hose Assembly to Inlet Bayonet and turn anticlockwise to secure bayonet fitting
4Connect wand with Tool Caddy to the Bent End Piece.
5Connect the 2 wands together to create one length.
6Connect the Tool attachment of your choice to the wand.
6 ADJUSTING AND WEARING
1.
Loosen both Shoulder Pads
2. Lift Advantage onto Shoulder sliding
one arm through the shoulder harness.
Slide other arm through the second
shoulder harness
4. Secure Waist Pad around waist to suit
your personal comfort.
3. Tighten Shoulder Pad to suit your
personal comfort
5. Wear the Advantage as illustrated

Pg 5
7. VACUUMING APPLICATIONS
1.
The EZ2GO™ floor tool has been designed for both hard and
soft floors. Its low profile allows easy access to low recesses, under
desks, tables, chairs and furniture.
2. When vacuuming loose fabric or light floor mats, adjust the
Suction Regulator slider to the desired level to relieve the vacuum
suction.
3. Advantage is supplied
with a Tool Caddy and on
board tool holder on the
Waist Pad. Whatever your
preference you can carry a
full complement of tools for
any vacuuming task you
encounter.
6. The Crevice Tool is used for
crevice and corner cleaning,
upholstery or spot cleaning.
4. The adjustable Dusting Brush is used
for upholstery, corners, blinds, desk tops
and cleaning cornices.
5.
The Upholstery Tool is used for upholstery
cleaning and narrow gaps.
8. The optional Turbine Brush is used for large areas,
easier hair pick up or when improved productivity and
efficiency are required.
7. Using the optional Combination
Floor Tool you sweep and vacuum at
the same time. This tool is suited for
cleaning irregular surfaces, e.g. tiles,
safety floors, timber floors and
carpet. The foot operated button
extends the bristle for hard floors and
retracts for use on carpet. It is extra
wide for improved productivity.

Pg 6
8. ON BOARD CONVENIENCE
9. EMPTYING THE BIN
2. When on the go, or vacuuming
dusty areas, a spare filter can be
carried behind the back pad.
1. The Smart Cord restraint eliminates cord
strain, and provides easy access for cord
replacement.
3. Simply unclip the Micro-fibre Duster
from the Carabiner to clean the Bin and
return after use.
4. Carry your favourite tools on the Waist Pad
5. The Motor Filter is located above the
motor. Simply unscrew the Cover and
service or replace the filter as needed.
6. All back padding use tools free
assembly. Replace parts when worn.
1. Uncouple the Bayonet Fitting on the Vacuum
Hose. (Turn clockwise)
2. Turn the Lever Lock 180ºto lock and unlock
tank.
3. Press the Bin Release
Button to empty bin.

Pg 7
10.CLEANING THE BIN
11. CLEANING THE MOTOR FILTER
12. CARRYING AND CORD STORAGE
2. Located under the Tank Assembly and above the
Motor Housing Assembly. Remove the Filter Cover
twisting in an Anti-Clockwise direction. Remove the
soiled filter and replace with a clean filter.
1. Vacuum the soiled filter using the Bent End Piece working from
the centre to the edges. Vacuum the soiled side 75% of the time and
the white side 25% of the time. A 30second vacuum restores the filter
to 90% of its original condition. Store the refurbished filter behind the
back padding for re-use. Replace the filter when worn. The filter may
also be washed for a thorough clean. Press squeeze the filter to
remove water, do not wring dry. Use only when filter is dry.
1. Remove dirt lodged on the Filter Mesh by
wiping with the Duster. Filter holes must be
visible all times for good filtration.
2. Remove fluff from seals and cavities
shown.
1.
Turn power OFF at the machine
and Power Point. Unplug cord from
Power Point and wind from machine
end. Drape cord over the Frame.
2. Wrap Waist Pad ends
around to the front of the
machine and lock together.
3.
Ensure Lever Lock is engaged.
Lift the machine from the front by the
Handle to carry. Always transport
the machine in an upright position.

Pg 8
13. TROUBLE SHOOTING GUIDE
Problem
Possible Cause
Solution
Machine does not operate
•
Not plugged into power point
•
Plug into Power socket
•No power at the power point
•Move to a functional power point.
•
Machine switch or power switch OFF
•
Turn switch ON
•
Faulty Cord or Coupling Cord
•
Replace Cord
•
Faulty Switch or Motor
•
Contact Service Centre
Loss of Suction
•Blockage
•Check for blockage and clear
•
Suction Regulator open
•
Close Suction Regulator
•
Bin Full
•
Empty Bin
•
Motor Filter Blocked
•Mesh Filter Blocked
•
Bin Seal pulled out
•
Clean Filter
•Clean Filter
•
Replace Seal
•
Poppet Valve loose
•
Tighten Poppet Valve
14. SPECIFICATIONS
Physical
Machine
Capacity (l)
5
Power (w)
900
Gross Package Weight (kg)
7.5
Suction (kPa)
25
Carry Weight (kg)
4.9
Over Suction Protection
Poppet Valve
Noise (dB
A
)
72
Voltage (V a.c.)
220 - 240
Cord Length (m)
18
Compliance
RCM
Hose Length (m)
1.2
Class
2
Reach Length (m)
20.5
Type
Dry
Accessory Dimension (mm)
32
Motor
Wand (mm)
2 pc x 500
Type
Flow Thru
Floor Tool (mm wide) EZ2GO
285
Air Flow (l/s)
49
Filtration
Thermal Protection
100ºC
Primary
Multi-cyclone
Warranty
Motor Filter
Antimicrobial
Period
1 Year
Efficiency
99.98%
Refer Warranty Statement
Efficacy
99.9% CFU 24h
Bacteria: Escherichia Coli, Klebsiella Pneumoniae,
Staphylococcus Aureus, Pseudomonas Aeruginosa,
Corneybacterium Ammoniagenes
Moulds: Aspergillus Niger,
Trycophyton, Mentagrophytes
Note: The Advantage vacuum cleaner design incorporates Australian Patent PCT/AU2016/051151, India Patent
201817019780, China Patent 201680068540.0, Registered Design App. No. 201612860, Innovative Patent App No.
2016101477, EZ2GO™ No. 1787984

Pg 9
4x1
4x3
4
5
7
4x1
19
2
6
11
10
9
8
12
13
14
15
16
17
18
20
2x23
22
21
3
2x24
2x25
26
29
28
30
2x31
32
33
34
3
35
2x1
4x36
1
39
38
37
42
41
40
2x1
47
43
44
3x1
45
46
48
49
50
2x51
55
59
52
58
15. PARTS DIAGRAM
9A
A
A
A
9B
27
53
54
55
56
57
8A