Advantech MIC-75G20 Installation and operation manual

MIC-75G20 Startup Manual 1
Before you begin installing your i-Module, please make
sure that the following items have been shipped:
1. MIC-75G20 i-Module x1 P/N: MIC-75G20-00A1
2. 4-pin phoenix connector x2 P/N: 1652003234
3. SATA cable (30cm) x1 P/N: 1700017838
4. SATA cable (40cm) x1 P/N: 1700020978-01
5. HDD BP power cable x1 P/N: 1700024985-01
6. GPU power cable P/N: 1700023022-01
(6 to 6/8 Pin) x2
7. Mounting bracket (I-type) x1 P/N: 1960070543T001
8. Mounting bracket (C-type) x1 P/N: 1960070545N001
9. Screw for mounting bracket x4 PN: 1930007259-01
10. MIC-75G20 Start-up manual x1 P/N: 20415G2000
If any of these items are missing or damaged, please
contact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at: get.
adobe.com/reader (Acrobat is a trademark of
Adobe)
PCIe Slots
• One PCIe x16 socket
• One PCIe x4 socket
MIC-75G20
GPU card Expansion i-Module for MIC-7 Series
Embedded System
Startup Manual
Environment
• Operating Temperature:
0 ~ 40° C with 0.7 m/sec air flow: with Industrial SSD
• Storage Temperature: - 40 ~ 85° C (-40 ~185° F)
• Relative Humidity: 95% @ 40° C (non-condensing)
Mechanical
• i-Module Dimensions: i-Module Dimension (W x H x D):
110 x 192 x 350 mm
• With MIC-7 series: With MIC-7 series (W x H x D): 183 x
192 x 350 mm
Note: Width will be increased by 4mm with MIC-77xx.
Connectors
No. Item Function
1 DCIN1 24VDC in
2 PPCIE2 PCIe x16 slot
3PPCIE1 PCIe x4 slot
4SATAPWR1 4-pin SATA power connector (5V)
5SATA1 SATA signal connector
6GPUPWR1 6-pin power connector for GPU
card (12V, 17A)
7GPUPWR2 6-pin power connector for GPU
card (12V, 17A)
8DC12VO-
OUT1 4-pin power connector (12V, 5A)
9SYSFAN1 4-pin fan connector
10 SYSFAN2 4-pin fan connector (reserved)
11 LED GPU card power status
GPU PWR1
PCIe x16
PCIe x4
SATA power
SATA signal
GPU PWR 2
DC 12V PWR
Fan1 Conn.
Fan2 Conn.
24VDC-IN
GPU PWR LED
Specications (Cont.) Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
This manual is for the MIC-75G20 Rev. A1.
Part No. 20415G2000
Printed in China
1st Edition
December 2018
I/O Connectors
Specications

2 MIC-75G20 Startup Manual
System Installation
MIC-75G20 can be assembled with all MIC-7 series IPC
systems.
1. Undo MIC-7 series system screws and remove the
bottom cover.
2. Remove 2 x dust covers (IMPORTANT!).
1
1
2
3. Undo the 4 x screws on MIC-75G20.
3
3
2 x Swappable Storage bay
Independent 24VDC power for GPU Card
Support up to 600W Max. peak power currency
Slot 3: PCIe x16 for GPU card
Slot 2: Blank (space for double-deck GPU card)
Slot 1: PCIe x4 for add-on card
Indicating LED for GPU card power status
Simple Maintenace Process
Front View
4. Remove i-door bottom cover and assemble and secure
the cover into the i-Module’s bottom cover.
4
4
5. Align MIC-75G20 and MIC-7 and secure 4 x screws.
6. Assemble MIC-75G20 cover and secure with 6 x
screws.
5
6
6
Simple Maintenace Process (Cont.)

MIC-75G20 Startup Manual 3
Note: MIC-75G20 has 2 bolts which must be aligned
with the holes on the device.
7. Reassmble the cover and secure with screws.
Note: The chassis cover has a special notch which
must mate with the hook on the chassis.
Chassis Cover
Chassis hook
1. After GPU card has been installed, secure 2 x screw
so on the GPU card brackets.
2. Secure the GPU card holder with 4 x screws.
1
2
Recommend to replace fan filter at regular internals to
ensure the stability of system cooling.
1. Undo the system cover and remove the old fan filter.
2. Change the new fan filter and reassemble system cover with
screws.
1
TB2 pin-out (for Y-type cable)
Pin No. Assignment
1, 2 DC OUTPUT +V
3, 4 DC OUTPUT -V
TB1 pin-out (for PSU power cord)
Pin No. Assignment
1FG
2 AC/N or DC-
3 AC/L or DC+
Y type cable
Connect from PSU to the MIC-7000 and MIC-75G20
via optional PSU Y-cable with 2x 4-pin phoenix
connector (1652003234)
PSU pin-out
PSU power cord
(1.83M)
P/N: TBD
Y-Type cable
P/N: 1700029474-01
480W PSU
P/N: 96PSD-A480W24-MN
TB2 pin-out (for Y-type cable)
Pin No. Assignment
1, 2 DC OUTPUT +V
3, 4 DC OUTPUT -V
TB1 pin-out (for PSU power cord)
Pin No. Assignment
1FG
2 AC/N or DC-
3 AC/L or DC+
Y type cable
Connect from PSU to the MIC-7000 and MIC-75G20
via optional PSU Y-cable with 2x 4-pin phoenix
connector (1652003234)
PSU pin-out
PSU power cord
(1.83M)
P/N: TBD
Y-Type cable
P/N: 1700029474-01
480W PSU
P/N: 96PSD-A480W24-MN
Simple Maintenace Process (Cont.)
GPU Card Bracket Assembly
Fan lter Replacement
Power Supply Cabling Guide

4 MIC-75G20 Startup Manual
1. Type 1: Secure 1 x mounting bracket (1960070543T001) and 1 x mounting bracket (1960070545N001) with 4 x screws
(1930007259-01)
2. Type 2: Secure 2 x mounting brackets (1960070543T001) with 4 x screws (1930007259-01)
(There are 2x 1960070543T001 in the accessory box of MIC-7 series.)
0
5.20
192
0
5.20
183*
0
16 29
183*
200 213
0
22
40
190
208
350
0
22 40
190 208 350
0
17
30
192
209
222
Type 1 Type 2
* Width is 187mm with MIC-77xx installed.
1
2 Type 2
Type 1
System Dimensions
Mounting Bracket Assembly