Advantech AIIS-3411 Series User manual

User Manual
AIIS-3411
Machine Vision System
(Computer)

AIIS-3411 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2022
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at:
http://www.advantech.com/
http://www.advantech.com/ePlatform/
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support/
Part No. 20013401100 Edition 1
Printed in China August 2022

iii AIIS-3411 User Manual
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Declaration of Conformity
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference. In
this event, users are required to correct the interference at their own expense.

AIIS-3411 User Manual iv
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions and Notes
Warning! Warnings indicate conditions that if not observed can cause personal
injury!
Les avertissements indiquent des conditions qui, si elles ne sont pas
respectées, peuvent blessure!
Caution! Cautions are included to help prevent hardware damage and data
losses. For example,
“Batteries are at risk of exploding if incorrectly installed. Do not attempt
to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.”
Des précautions sont incluses pour vous aider à éviter d'endommager le
matériel ou de perdre
Les données. par exemple.:
Il y a un risque d'explosion d'une nouvelle batterie si elle n'est pas
installée correctement.N'essayez pas de recharger, d'ouvrir de force ou
de chauffer la batterie. Remplace le batterie uniquement avec le même
type ou un type équivalent recommandé par le fabricant. Jeter les piles
usagées conformément aux instructions du fabricant instructions.
Note! Notes provide optional additional information.

v AIIS-3411 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If any of the following occurs, have the equipment checked by service person-
nel:
–The power cord or plug is damaged.
–Liquid has penetrated the equipment.
–The equipment has been exposed to moisture.
–The equipment is malfunctioning, or does not operate according to the user
manual.
–The equipment has been dropped and damaged.
–The equipment shows obvious signs of breakage.
15. Do not leave the equipment in an environment with a storage temperature of
below -40° C (-40° F) or above 70° C (158° F) as this may damage the compo-
nents. The equipment should be kept in a controlled environment.
16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only
with the same or equivalent type as recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
17. In accordance with IEC 704-1:1982 specifications, the sound pressure level at
the operator’s position does not exceed 70 dB (A).
18. RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
19. The camera is only to be connected to PoE networks without routing to outside
plants.
20. The power cord must be connected to a socket or outlet with a ground connec-
tion.
21. Suitable for installation in Information Technology Rooms in accordance with
Article 645 of the National Electrical Code and NFPA 75.
22. DISCLAIMER: These instructions are provided according to IEC 704-1 stan-
dards. Advantech disclaims all responsibility for the accuracy of any statements
contained herein.

AIIS-3411 User Manual vi
Consignes de sécurité
1. Lisez attentivement ces consignes de sécurité.
2. Conservez ce manuel d'utilisation pour référence ultérieure.
3. Débranchez cet équipement de toute prise secteur avant de le nettoyer. Utilisez
un humide tissu. N'utilisez pas de détergents liquides ou en spray pour le net-
toyage.
4. Pour les équipements enfichables, la prise de courant doit être située près de
l'équipement et doit être facilement accessible.
5. Gardez cet équipement à l'abri de l'humidité.
6. Placez cet équipement sur une surface fiable pendant l'installation. Le laisser
tomber ou le laisser sa chute peut provoquer des dommages.
7. Les ouvertures sur l'enceinte sont destinées à la convection d'air. Protégez
l'équipement de surchauffe. NE COUVREZ PAS LES OUVERTURES.
8. Assurez-vous que la tension de la source d'alimentation est correcte avant de
connecter équipement à la prise de courant.
9. Positionnez le cordon d'alimentation de sorte que personne ne puisse marcher
dessus. Ne placez rien sur le cordon d'alimentation.
10. Toutes les précautions et avertissements sur l'équipement doivent être notés.
11. Si l‘équipement n’est pas utilisé pendant une longue période, débranchez-le de
la source d‘alimentation pour éviter les dommages par surtension transitoire.
12. Ne versez jamais de liquide dans une ouverture de l‘appareil. Cela peut provo-
quer un incendie ou des choc.
13. N‘ouvrez jamais l’équipement. Pour des raisons de sécurité, l‘équipement doit
être ouvert uniquement par un technicien qualifié.
14. Si l’une des situations suivantes se présente, faites vérifier l‘équipement par le
service personnel:
Le cordon d'alimentation ou la fiche est endommagé.
Du liquide a pénétré dans l'équipement.
L'équipement a été exposé à l'humidité.
L'équipement ne fonctionne pas bien ou vous ne pouvez pas le faire fonction-
ner le manuel de l'utilisateur.
L'équipement est tombé et a été endommagé.
L'équipement présente des signes évidents de rupture.
15. Ne laissez pas cet équipement dans un environnement où la température de
stockage peut descendre en dessous de -40° C (-40° F) ou au-dessus de 70° C
(158° F). Cela pourrait endommager le équipement. L'équipement doit être
dans un environnement contrôlé.
16. ATTENTION: Risque d‘explosion si la batterie n’est pas remplacée correcte-
ment. Remplacer seulement de type identique ou équivalent recommandé par
le fabricant, jeter piles usagées conformément aux instructions du fabricant.
17. Le niveau de pression acoustique au poste de l‘opérateur selon CEI 704-1:
1982 ne dépasse pas 70 dB (A).
18. ZONE D‘ACCÈS RESTREINT: l’équipement ne doit être installé que dans un
Zone d'accès restreint.
19. La caméra ne doit être connectée qu'aux réseaux PoE sans acheminement vers
des installations extérieures.
20. Le cordon d'alimentation doit être connecté à une prise ou une prise avec une
connexion à la terre.
21. Convient pour une installation dans des salles de technologie de l'information
conformément à l'article 645 du Code national de l'électricité et NFPA 75.

vii AIIS-3411 User Manual
22. AVERTISSEMENT: Cet ensemble d‘instructions est donné conformément à la
CEI 704-1. Advantech décline toute responsabilité quant à l’exactitude des déc-
larations contenues ici.
Packing List
Before system installation, check that the items listed below are included and in good
condition. If any item does not accord with the list, contact your dealer immediately.
Ordering information
Optional accessories
AIIS-3411 Bare System x 1
Startup Manual (EN/CN) x 1 PN: 2041341100
Wallmount Bracket x 2 PN: 1960014487T006
Rubber Foot x 4 PN: 1990006571S000
CPU Cooler x 1 PN: 1960053207N001
2-pin Phoenix DC
Power Connector x 1 PN: 1652002205
4-pin Phoenix Power
Connector x 1 PN: 1652003234
Part Number Camera
Interface Display USB 3.0 COM 232/422/485
AIIS-3411P-00A1 4-CH GigE PoE VGA+HDMI 4 2
AIIS-3411U-00A1 4-CH USB 3.0 VGA+HDMI 4 2
Part Number Description
AIIS-1882-AE 4-ch Lighting Control with 32-ch Isolated 16 DI/16 DO PCI Express Card
96PSA-A230W24P4-3 230Watt 24Vdc Adapter, FSP230-AAAN3
1702002600 Power Cord UL 3P 10A 125V
1700022940-01 Power Cord PSE 3P 7A 125V
1702002605 Power Cord EU 3P 10A 250V
9691341010E PCI riser card
PCIE-1674-AE 4-port PCI express GbE card
1700024858-01 A cable 2*2P-4.2/2*2P-4.2 15cm (for PCIE-1674)

AIIS-3411 User Manual viii

ix AIIS-3411 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ............................................................................................... 2
1.2 Product Features....................................................................................... 2
1.3 Product Specifications............................................................................... 3
1.3.1 Processor System......................................................................... 3
1.3.2 Memory......................................................................................... 3
1.3.3 Graphics........................................................................................ 3
1.3.4 PoE (Power Over Ethernet) .......................................................... 3
1.3.5 Ethernet ........................................................................................ 3
1.3.6 Storage ......................................................................................... 3
1.3.7 Front I/O........................................................................................ 3
1.3.8 Watchdog Timer............................................................................ 4
1.3.9 Power Requirement ...................................................................... 4
1.3.10 Cooling.......................................................................................... 4
1.3.11 Miscellaneous ............................................................................... 4
1.3.12 Environment.................................................................................. 4
1.3.13 Physical Characteristics................................................................ 4
1.3.14 EMC.............................................................................................. 4
1.3.15 Safety............................................................................................ 4
1.4 Jumper Settings ........................................................................................ 5
1.4.1 How to Set Jumpers...................................................................... 5
Table 1.1: PSON1: System AT/ATX Mode Selection.................. 5
Table 1.2: Clear CMOS ............................................................... 5
Table 1.3: JME1: Enable or Disable ME...................................... 6
Table 1.4: JWDT1: Watch Dog Timer.......................................... 6
Chapter 2 Hardware Installation ..........................7
2.1 Front Panel Controls, Indicators & Connectors......................................... 8
Figure 2.1 AIIS-3411U Front View............................................... 8
Figure 2.2 AIIS-3411P Front View............................................... 8
2.1.1 Power On/Off Button..................................................................... 9
Figure 2.3 Power On/Off Button .................................................. 9
Table 2.1: Power Button Connector Pin Assignment .................. 9
2.1.2 LED Indicators .............................................................................. 9
Figure 2.4 LED Indicators............................................................ 9
Table 2.2: LED Indicators (Thermal & HDD) ............................... 9
Table 2.3: LED Indicator (PoE).................................................... 9
2.1.3 Power Input Connector ............................................................... 10
Figure 2.5 Power Input Connector............................................. 10
Table 2.4: Power Input Connector Pin Assignments................. 10
2.1.4 VGA+HDMI Connector ............................................................... 10
Figure 2.6 Figure 2.7 VGA Connector ....................................... 10
Table 2.5: VGA Connector Pin Assignment .............................. 10
2.1.5 HDMI Connector ......................................................................... 11
Figure 2.7 HDMI Connector....................................................... 11
Table 2.6: HDMI Connector Pin Assignments........................... 11
2.1.6 COM Connectors ........................................................................ 12
Figure 2.8 COM Connectors...................................................... 12
Table 2.7: Front 2-COM Pin Assignment................................... 12
2.1.7 Ethernet Connectors (LANs)....................................................... 12
Figure 2.9 Ethernet Connector .................................................. 12
Table 2.8: Ethernet Connector Pin Assignment ........................ 12
2.1.8 USB 3.0 Connectors ................................................................... 13

AIIS-3411 User Manual x
Figure 2.10USB 3.0 Connectors................................................. 13
Table 2.9: USB3.0 Connector Pin Assignment ......................... 13
2.1.9 Audio Connector......................................................................... 13
Figure 2.11Audio Connector....................................................... 13
Table 2.10:Audio Connector Pin Assignments........................... 13
2.1.10 Remote Power Switch Connector............................................... 13
2.2 CPU Installation ...................................................................................... 14
2.3 CPU Cooler Installation........................................................................... 15
Figure 2.12CPU & CPU Cooler Installation ................................ 15
2.4 Memory Installation................................................................................. 16
Figure 2.13Memory Installation .................................................. 16
2.5 HDD Installation ...................................................................................... 17
Figure 2.14HDD Installation ....................................................... 17
2.6 Internal USB Lock Installation................................................................. 18
2.7 AIIS-1882 Installation.............................................................................. 19
2.8 Wallmount Installation............................................................................. 21
Figure 2.15Wallmount Installation .............................................. 21
2.9 DIN-rail Installation.................................................................................. 22
Figure 2.16DIN-rail Installation ................................................... 22
2.10 PCIE/PCI Card Installation...................................................................... 23
Figure 2.17PCIE/PCI Card Installation ....................................... 23
Chapter 3 AMI BIOS Setup................................. 25
3.1 Introduction ............................................................................................. 26
Figure 3.1 Main Setup Screen.................................................. 26
3.2 Entering BIOS Setup............................................................................... 27
3.2.1 Main Menu.................................................................................. 27
Figure 3.2 Main Setup Screen................................................... 27
3.2.2 Advanced BIOS Features Setup................................................. 28
Figure 3.3 Advanced BIOS Features Setup Screen.................. 28
Figure 3.4 RC ACPI Settings..................................................... 29
Figure 3.5 CPU Configuration ................................................... 30
Figure 3.6 Power & Performance .............................................. 31
Figure 3.7 PCH-FW Configuration............................................. 32
Figure 3.8 Trusted Computing................................................... 33
Figure 3.9 ACPI Settings.......................................................... 34
Figure 3.10SMART Settings....................................................... 35
Figure 3.11Super IO Configuration............................................. 36
Figure 3.12 Super IO Configuration............................................ 37
Figure 3.13HW Monitor .............................................................. 38
Figure 3.14S5 RTC Wake Settings ............................................ 39
Figure 3.15Serial Port Console Redirection ............................... 40
Figure 3.16Serial Port Console Redirection ............................... 40
Figure 3.17Intel TXT Information................................................ 41
Figure 3.18USB Configuration.................................................... 42
Figure 3.19CSM Configuration ................................................... 43
3.2.3 Chipset........................................................................................ 44
Figure 3.20Chipset ..................................................................... 44
Figure 3.21System Agent (SA) Configuration ............................ 44
Figure 3.22System Agent (SA) Configuration ............................ 45
Figure 3.23Graphics Configuration............................................. 46
Figure 3.24PCH-IO Configuration .............................................. 47
Figure 3.25Configure PCIE Device Initial Delay Time................ 48
Figure 3.26Configure PoE Power Setting................................... 48
3.2.4 Security....................................................................................... 49
Figure 3.27Security .................................................................... 49
3.2.5 Boot ............................................................................................ 50
Figure 3.28Boot .......................................................................... 50

xi AIIS-3411 User Manual
3.2.6 Save & Exit ................................................................................. 51
Figure 3.29Save & Exit ............................................................... 51
Chapter 4 Software Installation .........................53
4.1 Chipset Software Installation Utility......................................................... 54
4.1.1 Before You Begin........................................................................ 54
4.1.2 Introduction ................................................................................. 54
4.1.3 Windows Driver Setup ................................................................ 54
4.2 Integrated Graphic Device Setup............................................................ 55
4.2.1 Introduction ................................................................................. 55
4.2.2 Windows Driver Setup ................................................................ 55
4.3 Intel® ME ................................................................................................ 55
4.3.1 Introduction ................................................................................. 55
4.3.2 Installation................................................................................... 55
4.4 LAN Configuration................................................................................... 55
4.4.1 Introduction ................................................................................. 55
4.4.2 Features...................................................................................... 55
4.4.3 Installation................................................................................... 56
4.4.4 Windows Driver Setup ................................................................ 56
4.5 HD Audio................................................................................................. 56
4.5.1 Introduction ................................................................................. 56
4.5.2 Installation................................................................................... 56
Appendix A Programming the Watchdog Timer..59
A.1 Watchdog Timer Overview...................................................................... 60
A.2 Programming the Watchdog Timer ......................................................... 60
Table A.1: Watchdog Timer Registers....................................... 62
A.2.1 Example Programs ..................................................................... 62
Appendix B 32-bit DIO Signal Connections .........67
B.1 Overview ................................................................................................. 68
B.2 Isolated Digital I/O Connections.............................................................. 68
B.2.1 Dry/Wet Contact Support for Digital Input................................... 68
Figure B.1 Isolated Digital Input Connections............................ 68
B.2.2 Isolated Digital Output Connections............................................ 69
Figure B.2 Isolated Digital Output Connections ......................... 69
Appendix C Exploded Diagram & Parts List ........71
C.1 Exploded Diagram................................................................................... 72
Figure C.1 Exploded Diagram.................................................... 72
Table C.1: Parts List................................................................... 73

AIIS-3411 User Manual xii

Chapter 1
1General Introduction
This chapter gives background
information on the AIIS-3411
series.

AIIS-3411 User Manual 2
1.1 Introduction
The AIIS-3411 Box IPC is an ideal application-ready system platform solution. All
electronics are protected in a compact, sealed case for easy embedding in the cus-
tomer’s own housing, or as a stand-alone unit where space is limited. Moreover, the
AIIS-3411 also supports lighting control via the optional AIIS-1882 Digital I/O and
additional 12 ~ 24 VDC power input.
The AIIS-3411P’s self-contained PoE controller features performance computing with
Power over Ethernet, multiple I/O interface, and extended product longevity, all in a
compact form factor. These PoE boxes use the latest 10th generation Intel® CoreTM
processors to deliver improved computing power and graphics performance. Already
fully verified and certified, they offer system integrators for a no-nonsense solution.
The AIIS-3411U is designed with a dedicated USB 3.0 controller to ensure sufficient
bandwidth so a single USB cable can carry both data and electrical power. Compliant
with USB 3.0 SuperSpeed, it is capable of transferring data at up to 5 Gbps, whereas
USB 2.0 can only provide up to 480 Mbps.
AIIS-3411P utilizes a single RJ45 cable that carries both data and electrical power.
Compliant with IEEE 802.3af, it can provide a maximum of 15 watts of power to each
powered device up to a distance of 100 meters, whereas USB 2.0 can only provide
up to 4.5 watts, with a maximum cable length of 5 meters.
The AIIS-3411P offers plenty of I/O interfaces, including four PoE port channels and
the AIIS-3411U offers eight USB 3.0 ports (four of them are designed with dedicated
controllers), max. 40-bit digital I/O, and two serial ports. Four USB 3.0 ports provide
high-performance data transfer up to 5 Gbps. The two serial ports on the front panel
can be configured as RS-232, RS-422 or RS-485 via BIOS setting. These interfaces
can support various peripheral devices.
1.2 Product Features
10th gen. Intel Core i9/i7/i5/i3 CPU (LGA1200)
PoE, AIIS-3411P
–Controller: CH1~CH4: Intel® i210 x 4
–Compliant: IEEE 802.3af
–Power Output: 15 W max. per channel/30 W max. for 1 & 2 channel
USB, AIIS-3411U
–Controller: CH1~CH4: uPD720202 x4
–Compliant: USB 3.0
–Power output: 4.5 W per channel
Compact & Thoughtful Design
–Easier fan filter maintenance
–Internal USB Type-A with locking design (Max. 49 mm length)
–Wall or DIN-rail mounting kit (optional)
–Built-in lighting control with additional 12 V ~ 24 VDC input (optional AIIS-
1882)

3 AIIS-3411 User Manual
Chapter 1 General Introduction
1.3 Product Specifications
1.3.1 Processor System
10th Gen. Intel Core i9/i7/i5/i3 CPU (LGA1200)
1.3.2 Memory
Supports dual channel DDR4 SODIMM-2933 MHz, 32GB per slot without ECC
function; Max capacity: 64GB
1.3.3 Graphics
Chipset: Intel® HD Graphics
1.3.4 PoE (Power Over Ethernet)
PoE, AIIS-3411P
–Controller: CH1~CH4: Intel i210 x 4
–Compliant: IEEE 802.3af
–Power Output: 15 W max. per channel/30 W max. for 1 & 2 channels (control
by BIOS, and enable or disable PoE power setting at 3.2.3.2)
USB, AIIS-3411U
–Controller: CH1~CH4: uPD720202 x 4
–Compliant: USB 3.0
–Power output: 4.5 W per channel
1.3.5 Ethernet
Interface: 10/100/1000 Mbps
Controller:
–LAN1: Intel i219LM, supports Wake on LAN
–LAN2: Intel i210AT, supports Wake on LAN
1.3.6 Storage
Internal 2.5" HDD (max. 9.5 mm height): 1
mSATA: 1
1.3.7 Front I/O
Display: 1 x VGA; 1 x HDMI: Up to resolution 4096x2160@24 Hz refresh rate,
VGA: Up to 1920 x 1200 resolution @ 60 Hz refresh rate
USB: 4 x USB 3.0
Serial: 2 x RS-232/422/485
Audio: Line-out/Mic-in
Professor
System
CPU i9-
10900E
i9-
10900TE
i7-
10700E
i7-
10700TE
i5-
10500E
i5-
10500TE
i3-
10100E
i3-
10100TE G6400E G6400TE G5900E G5900TE
Core 10 10 8 8 6 6 4 4 2 2 2 2
Base
Frequency
2.80
GHz
1.80
GHz
2.90
GHz
2.00
GHz
3.1
GHz
2.3
GHz
3.20
GHz
3.60
GHz
3.80
GHz
3.20
GHz
3.20
GHz
3.00
GHz
L3 Cache 20MB 20MB 16MB 16MB 12MB 12MB 6MB 6MB 4MB 4MB 2 MB 2 MB
Chipset H420E
BIOS AMI 128Mb SPI Flash

AIIS-3411 User Manual 4
1.3.8 Watchdog Timer
Output: System reset
Interval: Programmable 1~255 sec/min
1.3.9 Power Requirement
Power type: ATX/AT
Power input voltage: 19 VDC - 24 VDC
Power Input: 19 VDC - 24 VDC @ 11.28 - 9.02 A
Power adapter: AC to DC, 24 VDC/9.58 A, 230 W, 96PSA-A230W24P4-3
(optional)
1.3.10 Cooling
System Fan: 1 (8 cm/57 CFM) for AIIS-3411
1.3.11 Miscellaneous
LED Indicators: Power, HDD, temperature
Control: Power on/off switch
1.3.12 Environment
Operating Temperature: 0 ~ 50 ºC (32 ~ 122 ºF)*
Non-operating Temperature: -40 ~ 70 ºC (-40 ~ 158 ºF)
Operating Humidity: 10 ~ 95% @ 40 ºC, non-condensing
Non-operating Humidity: 10 ~ 95% @ 60 ºC, non-condensing
1.3.13 Physical Characteristics
For AIIS-3411P/U
Dimension: 240 x 97 x 190 mm (9.45" x 3.82" x 7.48")
Weight: 2.56 kg (5.64 lb, w/o CPU cooler)
1.3.14 EMC
CE, FCC, CCC, BSMI
1.3.15 Safety
UL, CB, CCC

5 AIIS-3411 User Manual
Chapter 1 General Introduction
1.4 Jumper Settings
1.4.1 How to Set Jumpers
You can configure your motherboard to match the needs of your application by set-
ting the jumpers. A jumper is a metal bridge that closes an electrical circuit. It consists
of two metal pins and a small metal clip (often protected by a plastic cover) that slides
over the pins to connect them. To “close” (or turn ON) a jumper, you connect the pins
with the clip. To “open” (or turn OFF) a jumper, you remove the clip. Sometimes a
jumper consists of a set of three pins, labeled 1, 2 and 3. In this case you connect
either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when set-
ting jumpers.
Table 1.1: PSON1: System AT/ATX Mode Selection
Function Jumper Setting
1-2 AT Mode
2-3 ATX Mode
Table 1.2: Clear CMOS
Function Jumper Setting
1-2 Normal (Default)
2-3 Clear CMOS
1
1
1
1

AIIS-3411 User Manual 6
Table 1.3: JME1: Enable or Disable ME
Function Jumper Setting
1-2 ME enable (Default)
2-3 ME disable
Table 1.4: JWDT1: Watch Dog Timer
Function Jumper Setting
1-2 Reserved
2-3 System reset (Default)
1
1
1
1

Chapter 2
2Hardware Installation
This chapter introduces external
IO and the installation of AIIS-
3411 Hardware.

AIIS-3411 User Manual 8
2.1 Front Panel Controls, Indicators & Connectors
Figure 2.1 AIIS-3411U Front View
Figure 2.2 AIIS-3411P Front View
iDoor (Optional) VGA
Power Button
DC IN
19V-24V
HDD &
Thermal LED
USB
channel
Remote
Switch
HDMI USB 3.0
AIIS-1882 (Optional)
COM1
COM2
Line out
Mic in
LAN 1
LAN 2
iDoor (Optional) VGA
Power Button
DC IN
19V-24V
HDD &
Thermal LED
PoE
channel
Remote
Switch
HDMI USB 3.0
AIIS-1882 (Optional)
COM1
COM2
LAN 1
LAN 2
Line out
Mic in