AE Adam CBX Series User manual
CONTENTS
P.N. 7006615803 – Revision A, May 2020
1.0 INTRODUCTION ................................................................. 1
2.0 KEY OPERATIONS
............................................................. 2
3.0 CALIBRATION
..................................................................... 3
4.0 MODEL SPECIFICATIONS
................................................. 3
WARRANTY INFORMATION ....................................................... 4
1.0 INTRODUCTION
Each CBX balance comes with internal rechargeable lithium battery and USB charging
lead. There is a choice of three capacities, each with four weighing units including grams,
pounds, ounces and Newtons, selectable by a Mode/Units key. The bright backlit display
enables operation in any degree of light, and the 304 grade stainless steel top pan offers
protection against most materials and liquids. With easy calibration through the keypad
the CBX ensures correct and accurate weighing at all times.
Always position the balance on a steady and level surface before use. Use the levelling
feet and bubble indicator to adjust the balance to level.
The display “-----” indicates that the balance has been overloaded or damaged.
The battery indicator symbol showing just one bar indicates that the battery needs
charging.
Plug the USB cable into the back of the balance and connect to a USB power source.
2.0 KEY OPERATIONS
Power on/off key.
Short press of this key turns on or off the backlight, press and hold the key
down to allow weighing units selection – g, N, oz or lbs.
Tare / Zero key is used remove the weight of an empty container or to zero
the balance.
In weighing mode, press and hold the counting key to enter the counting
function. The display will show PC with “10” flashing, press the mode/unit
key to change the sample size, available options are 10,20, 50, 100 & 200
After selecting the sample size, put the number of items to be counted that
equal the sample size on the top pan, press the counting key to confirm
The item weight is now stored in the balance, short pressing of the counting
key selects the counting function / returns to normal weighing.
Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, Woburn MA 01801 - TestEquipmentDepot.com
3.0 CALIBRATION
To calibrate the balance follow the instructions below:
1. Turn on the scale and zero it.
2. Press and keys about 5 seconds, it displays raw analogue to digital
counts.
3. Press one time, scale display CALL→[xxxx]，xxxx is the calibration weight
required.
4. Put the weight on the scale according to scale display value. Scale will
automatically calibrate,when the calibration is finished, the scale back to normal
weighing.
4.0 MODEL SPECIFICATIONS
Model CBX 1201 CB 3001 CB 6000
Maximum Capacity 1200g 3000g 6000g
Readability 0.1g 0.5g 1g
Units of Measure grams, Newtons, lbs and oz
Operating Temperature 0 - 40 degrees C
Power Supply 3.7V1.5Ah lithium battery
Calibration Mass 1000g 3000g 6000g
Display 5 x 18mm/0.71 inches high digits
Pan Size 148 x 148mm/5.8 x 5.8 inches square
Overall Dimensions (w x d x h)
155 mm x 225mm x 60mm
6.1 in x 8.9 in x 2.4 in
Net Weight 572 g / 1.26 lbs
WARRANTY INFORMATION
AdamEquipmentoffersLimitedWarranty(partsandlabour)forthecomponentsfaileddueto
defectsinmaterialsorworkmanship.Warrantystartsfromthedateofdelivery.
Duringthewarrantyperiod,shouldanyrepairsbenecessary,thepurchasermustinformits
supplierorAdamEquipmentCompany.ThecompanyoritsauthorisedTechnicianreservesthe
righttorepairorreplacethecomponentsatanyofitsworkshopsdependingontheseverityof
theproblems.However,anyfreightinvolvedinsendingthefaultyunitsorpartstotheservice
centreshouldbebornebythepurchaser.
Thewarrantywillceasetooperateiftheequipmentisnotreturnedintheoriginalpackaging
andwithcorrectdocumentationforaclaimtobeprocessed.Allclaimsareatthesolediscretion
ofAdamEquipment.
Thiswarrantydoesnotcoverequipmentwheredefectsorpoorperformanceisduetomisuse,
accidental damage, exposure to radioactive or corrosive materials, negligence, faulty
installation, unauthorized modifications or attempted repair orfailuretoobservethe
requirementsandrecommendationsasgiveninthisUserManual.Additionallyrechargeable
batteries(wheresupplied)arenotcoveredunderwarranty.
Repairs carried out under the warranty does not extend the warranty period. Components
removedduringthewarrantyrepairsbecomethecompanyproperty.
Thestatutoryrightofthepurchaserisnotaffectedbythiswarranty.Thetermsofthiswarranty
isgovernedbytheUKlaw.ForcompletedetailsonWarrantyInformation,seethetermsand
conditionsofsaleavailableonourweb‐site.
WEEE2012/19/EU
Thisdevicemaynotbedisposedofindomesticwaste.Thisalsoappliestocountriesoutsidethe
EU,pertheirspecific requirements.Disposal ofbatteries(if fitted)mustconformtolocallaws
andrestrictions.
Cetappareilnepeutêtreéliminéaveclesdéchetsménagers.L’éliminationdelabatteriedoitêtre
effectuéeconformémentauxloisetrestrictionslocales.
DiesesGerätnichtmitdemHausmüllentsorgt.
Dispositivonopuedeserdesechadojuntoconlosresiduosdomésticos
Dispositivononpuòesseresmaltitoneirifiutidomestici.
FCC/ICCLASSADIGITALDEVICEEMCVERIFICATIONSTATEMENT
NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigital
device,pursuanttoPart15oftheFCCrulesandCanadianICES‐003/NMB‐003regulation.These
limits are designed to provide reasonable protection against harmful interference when the
equipmentisoperatedina commercialenvironment. Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstruction
manual,maycauseharmfulinterferencetoradiocommunications.Operationof thisequipment
inaresidentialarea islikely tocauseharmfulinterference inwhichcasetheuserwillberequired
tocorrecttheinterferenceathisownexpense.
CALIFORNIAPROPOSITION65‐MANDATORYSTATEMENT
WARNING:Thisproductincludesasealedlead‐acidbatterywhichcontainschemicalsknownto
theStateofCaliforniatocausecancerandbirthdefectsorotherreproductiveharm.
AdamEquipmentproductshavebeentestedwith,andarealwayssuppliedwith
mains power adaptors which meet all legal requirements for the intended
country or region of operation, including electrical safety, interference and
energy efficiency. As we often update adaptor products to meet changing
legislationit isnotpossibletorefertotheexact modelinthismanual.Please
contactusifyouneedspecificationsorsafetyinformationfor yourparticular
item.Donotattempttoconnectoruseanadaptornotsuppliedbyus.
ADAMEQUIPMENTisanISO9001:2015certifiedglobalcompanywithmorethan40years’experienceinthe
productionandsaleofelectronicweighingequipment.
AdamproductsarepredominantlydesignedfortheLaboratory,Educational,HealthandFitness,Retailand
IndustrialSegments.Theproductrangecanbedescribedasfollows:
‐AnalyticalandPrecisionLaboratoryBalances
‐CompactandPortableBalances
‐HighCapacityBalances
‐Moistureanalysers/balances
‐MechanicalScales
‐CountingScales
‐DigitalWeighing/Check‐weighingScales
‐HighperformancePlatformScales
‐Cranescales
‐MechanicalandDigitalElectronicHealthandFitnessScales
‐RetailScalesforPricecomputing
ForacompletelistingofallAdamproductsvisitourwebsiteat
www.adamequipment.com
©CopyrightbyAdamEquipmentCo.Allrightsreserved.Nopartofthispublicationmaybereprintedortranslatedin
anyformorbyanymeanswithoutthepriorpermissionofAdamEquipment.
Adam Equipment reserves the right to make changes to the technology, features, specifications and design of the
equipmentwithoutnotice.
Allinformationcontainedwithinthispublicationistothebestofourknowledgetimely,completeandaccuratewhen
issued.However,wearenotresponsibleformisinterpretationswhichmayresultfromthereadingofthismaterial.
ThelatestversionofthispublicationcanbefoundonourWebsite.
www.adamequipment.com
Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, Woburn MA 01801 - TestEquipmentDepot.com
This manual suits for next models
3
Table of contents
