
- 5 -
All right reserved by aegis Multimedia Inc.
3. Package Contents
1 X Transmitter / Receiver,
1 X Power Adapter (DC 12V 1A),
1 X Exchangeable US Plug,
2 X Phoenix Male Connectors (3.5 mm, 3 Pins),
2 X Mounting Ears (with Screws).
4. FAQs
(1)Do the network switch and the wireless router require specific settings?
The network switch doesn't require specific settings. If the wireless router
enables the DHCP function, ensure the IP address doesn't start with
"169.254.X.X".
(2)Why can't the AGS-Tap Lite find online devices?
Ensure the network switch's broadcasting function is not disabled
intentionally.
(3)Do the transmitter and receiver support RS232 routing?
Yes. RS232 and audio routing will always follow video routing.
(4)Is it also available to configure a video wall in the 1-n application?
Yes.
(5)What about the networking size?
Limitless except that one transmitter can’t be watched by more than 50
receivers at the same time. Note: As the number of watching receivers
increases, the end-to-end latency increases accordingly.
(6)May I change the matched transmitter for a receiver without using the
AGS-Tap Lite app?
Yes. The matched transmitter will change by simply holding on to the ID
key in the front panel of a receiver for 2 seconds.