Alcatel-Lucent 5620 User manual

Alcatel-Lucent 5620
SERVICE AWARE MANAGER
NUAGE VIRTUALIZATION USER GUIDE
Alcatel-Lucent Proprietary
This document contains proprietary information of Alcatel-Lucent and is not to be disclosed
or used except in accordance with applicable agreements.
Copyright 2014 © Alcatel-Lucent. All rights reserved.
NUAGE V IRTUA LIZATION USER GU IDE
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

When printed by Alcatel-Lucent, this document is printed on recycled paper.
Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is
subject to change without notice.
Alcatel,Lucent,Alcatel-Lucent,theAlcatel-Lucentlogo,lightRadio,TiMetra,andNuage Networksare
registered trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
Copyright 2014 Alcatel-Lucent.
All rights reserved.
Disclaimers
Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design
engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous
environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft
navigation or communication systems, air traffic control, direct life-support machines, or weapons
systems, in which the failure of products could lead directly to death, personal injury, or severe physical
or environmental damage. The customer hereby agrees that the use, sale, license or other distribution
of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at
the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from
any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the
use, sale, license or other distribution of the products in such applications.
This document may contain information regarding the use and installation of non-Alcatel-Lucent
products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent
tries to ensure that this information accurately reflects information provided by the supplier, please refer
to the materials provided with any non-Alcatel-Lucent product and contact the supplier for
confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete
information provided about non-Alcatel-Lucent products.
However, this does not constitute a representation or warranty. The warranties provided for
Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by
Alcatel-Lucent and its customers.
This document was originally written in English. If there is any conflict or inconsistency between the
English version and any other version of a document, the English version shall prevail.
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Alcatel-Lucent 5620 Service Aware Manager iii
5620 SAM
Nuage Virtualization User Guide
Contents
Solution overview
1 — New features reference 1-1
1.1 New features in 5620 SAM Release 12.0............................................. 1-2
Deprecation notice................................................................... 1-2
Maintenance releases................................................................ 1-2
What’s new in 5620 SAM Release 12.0 R7 ........................................ 1-2
What’s new in 5620 SAM Release 12.0 R5 ........................................ 1-2
2 — 5620 SAM Nuage Virtualization overview 2-1
2.1 5620 SAM Nuage Virtualization overview............................................ 2-2
2.2 5620 SAM deployment and packaging................................................ 2-2
Nuage Virtualization features...................................................... 2-2
2.3 About this guide......................................................................... 2-3
3 — Nuage data center service delivery solution 3-1
3.1 Data center service delivery solution overview .................................... 3-2
3.2 Virtualized Services Directory......................................................... 3-2
3.3 Distributed Virtual Routing and Switching .......................................... 3-2
3.4 7850 VSG ................................................................................. 3-3
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Contents
iv Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
4 — 5620 SAM Nuage Virtualization platform and
components 4-1
4.1 5620 SAM Nuage Virtualization component overview.............................. 4-2
4.2 5620 SAM ................................................................................. 4-2
5620 SAM system architecture ..................................................... 4-3
5620 SAM GUI ......................................................................... 4-3
4.3 5650 CPAM................................................................................ 4-3
7701 CPAA............................................................................. 4-4
5 — DC applications 5-1
5.1 5620 SAM DC application overview................................................... 5-2
Browser compatibility ............................................................... 5-2
User group access permissions..................................................... 5-2
5.2 5620 SAM applications.................................................................. 5-2
GUI element buttons................................................................. 5-3
Integrated help....................................................................... 5-3
Equipment management
6 — Device commissioning and discovery 6-1
6.1 Device commissioning and discovery overview..................................... 6-2
6.2 7850 VSG commissioning............................................................... 6-2
6.3 5620 SAM device discovery ............................................................ 6-2
Discovery rules ....................................................................... 6-2
6.4 5620 SAM automated device provisioning ........................................... 6-3
Post-discovery actions............................................................... 6-3
End-to-End IP Auto-Provisioning Bundle.......................................... 6-3
Bulk operations....................................................................... 6-3
6.5 Device commissioning and discovery procedures .................................. 6-3
Procedure 6-1 To discover a network element and execute and
auto-configuration script...................................................... 6-4
7 — Equipment management 7-1
7.1 Equipment management overview ................................................... 7-2
7.2 High availability virtual chassis....................................................... 7-2
Network infrastructure management
8 — Network management 8-1
8.1 Network management overview ...................................................... 8-2
8.2 Data Center Manager ................................................................... 8-2
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Contents
Alcatel-Lucent 5620 Service Aware Manager v
5620 SAM
Nuage Virtualization User Guide
8.3 Virtual object persistence............................................................. 8-3
8.4 Virtual object properties forms....................................................... 8-4
Virtual machine properties ......................................................... 8-4
Virtual port properties .............................................................. 8-4
Virtual switch properties............................................................ 8-5
Virtual switch controller properties............................................... 8-6
8.5 DC PODs and Interconnects............................................................ 8-6
5620 SAM management of DC PODs and interconnects......................... 8-6
8.6 Data center management.............................................................. 8-7
8.7 Virtualization control management .................................................. 8-8
Virtual Node in the 5620 SAM ...................................................... 8-8
8.8 Software gateways...................................................................... 8-9
Port profiles........................................................................... 8-9
8.9 VRS redundancy ......................................................................... 8-9
8.10 Workflow for VSC redundancy setup................................................8-10
8.11 Network management procedures...................................................8-10
Procedure 8-1 To configure a data center .....................................8-10
Procedure 8-2 To configure DC PODs and DC interconnects.................8-11
Procedure 8-3 To search the data center network using the Cloud
Network navigation tree .....................................................8-13
Procedure 8-4 To configure OpenFlow on a VSC ..............................8-13
Procedure 8-5 To navigate from a VM or V-Port to associated
virtualized services or advertising routers ................................8-14
Procedure 8-6 To configure an ageout constraint policy.....................8-15
Procedure 8-7 To configure a port policy ......................................8-16
9 — Network monitoring and troubleshooting 9-1
9.1 Network monitoring and troubleshooting overview................................ 9-2
9.2 5650 CPAM IGP topology maps ........................................................ 9-2
Map highlighting...................................................................... 9-2
IP path monitors...................................................................... 9-2
Topology checkpoints................................................................ 9-3
9.3 Operational groups...................................................................... 9-3
9.4 Network monitoring and troubleshooting procedures............................. 9-3
Procedure 9-1 To map the control path from a VSC to an
associated VM................................................................... 9-3
Procedure 9-2 To map the path from an NE to an associated virtual
component ...................................................................... 9-4
Procedure 9-3 To configure an operational group ............................. 9-4
Service management
10 — Virtualized services 10-1
10.1 Virtualized services overview ........................................................10-2
10.2 Distributed virtual routing and switching overview...............................10-2
10.3 Virtualized service discovery.........................................................10-3
10.4 Lightweight services...................................................................10-3
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Contents
vi Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
10.5 Services Manager.......................................................................10-4
10.6 Virtualized service object properties forms .......................................10-5
Virtualized service properties form ..............................................10-5
V-Site properties form..............................................................10-5
Site properties form ................................................................10-6
11 — Services assurance and troubleshooting 11-1
11.1 Service assurance and troubleshooting overview .................................11-2
11.2 5650 CPAM for visibility and assurance.............................................11-2
11.3 Network object persistence ..........................................................11-2
11.4 Event retrieval log and correlation..................................................11-2
Learning correlation algorithm....................................................11-3
Historical Event Correlation Manager............................................11-3
BGP event correlation..............................................................11-4
11.5 5620 SAM fault correlation engine...................................................11-4
BGP prefix fault correlation.......................................................11-4
11.6 BGP troubleshooting...................................................................11-4
Administrative domains ............................................................11-5
BGP route profiles ..................................................................11-5
BGP event retrieval and impact analysis ........................................11-5
IGP prefix monitors .................................................................11-5
11.7 Services assurance and troubleshooting procedures..............................11-6
Procedure 11-1 To troubleshoot a virtual service using CPAM maps .......11-6
Procedure 11-2 To troubleshoot historical BGP or DC events ...............11-7
Procedure 11-3 To configure the DC event manager .........................11-8
Statistics management
12 — Statistics collection and plotting 12-1
12.1 Statistics collection and plotting overview ........................................12-2
12.2 Statistics collection....................................................................12-2
12.3 Statistics plotting ......................................................................12-3
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
Solution overview
1 — New features reference
2 — 5620 SAM Nuage Virtualization overview
3 — Nuage data center service delivery solution
4 — 5620 SAM Nuage Virtualization platform and components
5 — DC applications
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Alcatel-Lucent 5620 Service Aware Manager 1-1
5620 SAM
Nuage Virtualization User Guide
1 — New features reference
1.1 New features in 5620 SAM Release 12.0 1-2
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

1 — New features reference
1-2 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
1.1 New features in 5620 SAM Release 12.0
This section highlights new data center management features for 5620 SAM Release
12.0 and provides pointers into the documentation for information about using the
features. Feature lists and high-level feature descriptions are also available in the
5620 SAM Release Description.
Deprecation notice
This chapter will be deprecated in 5620 SAM Release 13.0 R1 and the feature
information moved to the “New Features” chapter of the 5620 SAM Documentation
Map. The Documentation Map provides entry points into the customer
documentation suite from various user, role, function, and feature perspectives. The
document can be used today as an alternative to this chapter for navigation to new
features for the entire release.
Maintenance releases
Some releases may not be listed in this section, either because no new features are
introduced or the features introduced do not require documentation.
What’s new in 5620 SAM Release 12.0 R7
Table 1-2 lists the data center management features added in 5620 SAM
Release 12.0 R7
Table 1-1 5620 SAM Release 12.0 R7 features
What’s new in 5620 SAM Release 12.0 R5
Table 1-2 lists the data center management features added in 5620 SAM
Release 12.0 R5
Feature ID Feature or function Description See
SAM-22032 Persistent object aging The 5620 SAM supports ageout constraint policies to
define the period of time the database retains
persisted virtual network objects.
Section 8.3
Procedure 8-6
SAM-38896 Virtualization QoS
improvements The 5620 SAM supports discovery of read-only DSCP mapping tables for VM V-Ports and software gateways. Section 8.4
SAM-38899 ACL DSCP match
criteria The 5620 SAM supports DSCP match crtieria for ingress and egress ACLs for VM V-Ports and software gateways. Section 8.4
SAM-45583 Multicast group support The 5620 SAM supports discovery VM multicast groups
from VSP. Section 8.4
SAM-45598 Operational port
groups and access
trunk shutdown
The 5620 SAM supports operational ports for physical
ports and LAGs on the 7850 VSG/VSA. Section 9.3
Procedure 9-3
SAM-47416 Dynamic services port
profile The 5620 SAM supports port profiles that define VLAN ranges and provisioning modes for ports and 7850 VSG
LAGs.
Section 8.8
Procedure 8-7
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

1 — New features reference
Alcatel-Lucent 5620 Service Aware Manager 1-3
5620 SAM
Nuage Virtualization User Guide
Table 1-2 5620 SAM Release 12.0 R5 features
Feature ID Feature or function Description See
SAM-13356 Multiple data center
support The 5620 SAM supports the management of up to 16 data centers. You can create multiple data center
objects in your cloud network.
Section 8.6
Procedure 8-1
SAM-15478 7850 VSG HA virtual
chassis The 5620 SAM supports the management of a virtual chassis — two 7850 VSG or 7850 VSA NEs operating as a
single management entity.
Section 7.2
SAM-28963 Software gateway
support The 5620 SAM supports software gateways as a standard attachment for virtualized services. Section 8.8
SAM-29049 dNAT support The 5620 SAM exposes the distributed NAT
configuration state within the lightweight service. The
distributed NAT IP address can be used to troubleshoot
and highlight network routes using the 5650 CPAM.
Section 8.4
SAM-36710 BGP alarm correlation
for absent DC events The 5620 SAM supports correlation for absent V-Port or BGP Prefix events. In cases where a V-Port or BGP
Prefixeventisexpected,butnotpresent,the5620 SAM
raises an alarm.
Section 11.5
SAM-38073 Fault management
correlation framework The 5620 SAM supports a new fault management framework with correlation rules specific to data
center alarms and events.
Section 11.5
SAM-38915 Historical event
correlation — IGP
monitoring
The 5620 SAM supports the use of IGP prefix
information for correlation purposes. IGP monitors are
used to monitor virtual components associated with an
IGP route and correlate IGP status to those objects.
Section 11.6
SAM-38919 V-Site persistency The 5620 SAM supports persistency for deleted
V-Switch Sites on virtualized services. Section 8.3
Section 10.4
Lightweight service
tunnel mapping The 5620 SAM supports the automatic creation of virtual spoke SDPs on EVPN services. Section 10.4
Section 10.6
SDNC service highlight
enhancement The 5620 SAM supports service highlighting from the V-Site. Section 10.4
IGP upstream router
monitor for deletions
and additions
The 5620 SAM uses information from IGP monitors to
correlate events to virtualized service objects when
upstream routers are added or removed or when there
is a redundancy change.
Section 11.6
SAM-38945 Data center
applications The 5620 SAM provides network management and fault monitoring functionality for virtualized services using
the following web-based applications:
•Data Center Inventory
•Data Center Service Navigator
Chapter 5
SAM-38994 7850 VSG/VSA and VSC
2.1 support The 5620 SAM supports the 7850 VSG, 7850 VSA, and standalone VSC, Release 2.1. —
SAM-39622 Customer and domain
enhancements The 5620 SAM supports a hierarchical list of services under each customer. This enhancement allows for
more navigability of virtualized services from the DC
web applications.
Chapter 5
SAM-47422 SWGW statistics and
TCA support The 5620 SAM supports statistics and TCAs for SGWG port (bridge and host) and SWGW V-Switches (VSG and
VRSG).
Section 8.8
SAM-45488 Release 3.0 VSG L3
dVRS support The 5620 SAM supports L3 VPLS for Release 3.0 Nuage network elements on V-Ports acting as a VSG gateway. Section 8.8
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

1 — New features reference
1-4 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Alcatel-Lucent 5620 Service Aware Manager 2-1
5620 SAM
Nuage Virtualization User Guide
2 — 5620 SAM Nuage Virtualization
overview
2.1 5620 SAM Nuage Virtualization overview 2-2
2.2 5620 SAM deployment and packaging 2-2
2.3 About this guide 2-3
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

2 — 5620 SAM Nuage Virtualization overview
2-2 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
2.1 5620 SAM Nuage Virtualization overview
The Alcatel-Lucent 5620 Service Aware Manager (5620 SAM) Nuage
Virtualization (NV) feature group provides the network management component for
the Alcatel-Lucent Data Centers Service Delivery solution. The solution combines
existing functionality from the 5620 SAM and the 5650 CPAM along with unique
data center feature sets to provide end-to-end network management and service
assurance for a data center network. This functionality allows you to:
•discover and manage a network of SROS-based NEs such as the 7850 VSG with
full FCAPS EMS support
•discover and manage generic network elements with system management and
MIB support
•provide IGP network infrastructure management
•monitor and manage virtual network objects with full visibility of associated
network objects and services
•discover and manage data center services such as dVRS and EVPN services
•monitor service status and reachability with virtualization-aware service views
and service mapping features
•manage alarms and identify the root cause or service impact of a network or
service problem using historical event correlation
•proactively test service performance and monitor network status with service
tests and threshold crossing alarms
•view performance, accounting, and server statistics and plot them into graphs
•provide OSS integration with external applications
2.2 5620 SAM deployment and packaging
The 5620 SAM is deployed and installed thesame way as a 5620 SAM/5650 CPAM
co-installation. See the 5620 SAM | 5650 CPAM Installationand Upgrade Guide for
more information.
Nuage Virtualization features
While the Nuage Virtualization feature set is derived from the 5620 SAM and the
5650 CPAM, packaging is not the same. Some 5620 SAM capabilities which are not
relevant to DC network management are excluded. For example, optical and LTE
support is not included.
Features in the Nuage Virtualization feature set are offered in the following layers
which reflect different sets of management capabilities.
•EML Layer — provides equipment management and FCAPS features for
managed devices with SNMP/SFTP/FTP. Standard equipment management
features for the 7850 VSG include backup and restore, statistics, alarms, and
equipment configuration.
•Infrastructure Layer — provides infrastructure topology management and
protocol management for the 7850 VSG and third-party GNEs. Standard
infrastructure management features include 5650 CPAM IGP maps, path
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

2 — 5620 SAM Nuage Virtualization overview
Alcatel-Lucent 5620 Service Aware Manager 2-3
5620 SAM
Nuage Virtualization User Guide
monitoring, protocol history, and associated alarms. The infrastructure layer also
includes the DC Manager tool and support for V-Node discovery and
management.
•Dynamic Service Layer — provides support for discovery, management, and
assurance of virtualized services. Standard service management features include
persistence of VM and service objects, service mapping to the IP underlay
network, BGP VPN route analytics features, fault correlation, and event logging.
•OSS Support — provides support for the 5620 SAM-O interface with
operational alarm and route analytic flows.
2.3 About this guide
This guide focuses on the Nuage Virtualization feature set. Where appropriate,
existing 5620 SAM or 5650 CPAM features have been highlighted when they are
integral to data center workflows.
This guide assumes you have followed the workflows for setup and deployment
outlined in the other guides provided with this documentation suite. Some existing
5620 SAM and 5650 CPAM functionality available in the Nuage Virtualization
feature set may be useful for data center network management without being
highlighted in this guide. See the 5620 SAM User Guide and the 5650 CPAM User
Guide for more information on 5620 SAM and 5650 CPAM.
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

2 — 5620 SAM Nuage Virtualization overview
2-4 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

Alcatel-Lucent 5620 Service Aware Manager 3-1
5620 SAM
Nuage Virtualization User Guide
3 — Nuage data center service delivery
solution
3.1 Data center service delivery solution overview 3-2
3.2 Virtualized Services Directory 3-2
3.3 Distributed Virtual Routing and Switching 3-2
3.4 7850 VSG 3-3
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

3 — Nuage data center service delivery solution
3-2 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
3.1 Data center service delivery solution overview
The Nuage data center service delivery solution provides end-to-end provisioning,
management, and assurance for virtualized services.
Figure 3-1 shows a simplified view of the solution using a 7850 VSG setup. In a
standalone VSC setup, a GNE or 7850 VSA is used as the L3 routing component.
Figure 3-1 Nuage data center service delivery solution
3.2 Virtualized Services Directory
TheNuageVirtualizedServicesDirectory(VSD)isa policy-basedsystemwhichcan
be used for creating virtualized services and provisioning them on the 7850 VSG. It
has a web-based UI foradministrator and tenant onboarding. The VSD is responsible
for user management databases, policy creation, and cross-system interfaces. The
VSD represents the user- or service-based outward functionality of the data center
network.
The VSD does not communicate directly with the 5620 SAM. It communicates with
the 7850 VSG or standalone VSC from which the 5620 SAM discovers virtualized
network and service objects. The 5620 SAM integrates these objects into the IP
underlay network view for event correlation and other functionality.
3.3 Distributed Virtual Routing and Switching
The Nuage distributed Virtual Routing and Switching (dVRS) service solution is
implemented and monitored by the VSD. Service creation and first-level monitoring
is provided by the VSD. The solution supports service objects specific to data
centers, such as VxLAN encapsulation. The solution also supports dynamic data
center service behavior, such as VM mobility. The solution supports interfacing with
the WAN network through methods such as BGP option B and VLAN-VLAN
interfaces. The service is a combined L2/L3 forwarding solution that consists of
component services that are discovered and monitored by the 5620 SAM.
See Chapter 10 for more information on virtualized services.
Hypervisor
VM V-Port
VM V-Port
VM V-Port
7850 VSG
V-Switch
VSD
XMPP
OpenFlow SNMP
BGP
VSC
7701 CPAA
5620 SAM
23945
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

3 — Nuage data center service delivery solution
Alcatel-Lucent 5620 Service Aware Manager 3-3
5620 SAM
Nuage Virtualization User Guide
3.4 7850 VSG
The Alcatel-Lucent 7850 Virtual Switch Gateway (7850 VSG) is the main hardware
component of the data center solution. The 7850 VSG is a top-of-rack switch that
provides connectivity to servers which store virtual machines (VMs). It is based on
the SROS platform and includes standard Ethernet and L3 routing functionality.
The 7850 VSG includes the virtual switch controller (VSC) component. The VSC is
a software-defined controller for the V-Switches attached to the 7850 VSG. It
includesa CLI interfaceandprotocolcapabilitiesto enablethe7850 VSGto function
as an integrated switch. The VSC can also be managed as a standalone software VM
component without a 7850 VSG. In a standalone VSC setup, a separate L3 router is
deployed (either a GNE or a 7850 VSA) to function with the VSC as a two-part
router.
The 7850 Virtual Switch Aggregator (7850 VSA) is a variantof the 7850 VSG. The
7850 VSA functions as an IP router as an end-of-rack switch. It includes the SROS
feature set, like the 7850 VSG. It can be deployed with the standalone VSC in a
two-part router setup.
The 5620 SAM can discover and manage the 7850 VSG, the 7850 VSA, and the
standalone VSC. The VSD configures service elements on these network elements,
such as virtual ports, ACL filters, and QoS policies. The 5620 SAM supports
standard equipment management features for the 7850 VSG, 7850 VSA, standalone
VSC, and all SROS-based NEs. See Chapter 7for more information.
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01

3 — Nuage data center service delivery solution
3-4 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01