Aerpro AMWCPAA1 User manual
QUICK START
GUIDE
AMWCPAA
aerpro.com
WIRELESS SMARTPHONE ADAPTER
Converts Wired CarPlay into Wireless CarPlay/Android Auto™
This Quick Start Guide provides instructions on how to connect the
AMWCPAA1 Wireless Smartphone Adapter to your head unit. This adapter is
designed for iPhone/Android smartphones to use Apple CarPlay/Android
Auto wirelessly on factory head units which have a built-in wired Apple
CarPlay function.
Please refer to the next page for how to check if your vehicle has Apple
CarPlay or not. However, NOT every vehicle with built-in CarPlay is suitable
to use this adapter. If there are any issues while using the adapter, please
do not hesitate to contact Aerpro Support Australia.
For more information on the AMWCPAA1 please refer to the product page
on the Aerpro website, scan the QR below or visit aerpro.com/AMWCPAA1
Introduction
1
•AMWCPAA1 Adapter
•USB cable Type C to Type A USB
•Type C to USB A Adapter
What's Included
2
Make sure that your head unit has the CarPlay feature.
Ways to check if your head unit has CarPlay:
• Check with your vehicles manufacture
• Check the vehicles owners manual
• Check the head units user interface for CarPlay
• Plug in a Apple CarPlay compatible device
System requirements
Red LED (Power)
Green LED
(Status)
USB Type C port Micro SD card
Input
•The LED indicator lights will illuminate when active.
•Power light stays on when powered.
•Status light flashing indicates the device is working.
Product Interface
3
4
1. Connect the AMWCPAA1 to the USB port compatible with CarPlay on your
head unit.
2. The AMWCPAA1 will automatically power on and you will be presented
with the Aerpro boot up screen. (A blue screen message may appear
stating the unit will recalibrate to your screen resolution and reset).
3. For first time connection to the AMWCPAA1, navigate to your smartphones
Bluetooth settings and select AMWCPAA1. Your phone will now
automatically connect with the AMWCPAA1.
Connecting to your head unit
Apple
Devices
Android
Devices
