Aetos 700w User manual

1080P Weather Station
Wi-Fi Camera
User Manual
Version:March,2015

Quick Guide of Wi-Fi Camera Function:
1.Plug in power —> Turn on indoor unit’s switch, wait for
2 minutes;
2.Enter smartphone setting —> Search and connect device’s
wi named: YM……,wait till phone status bar appear
Wi-Fi symbol;
3.Enter APP ,press + and select Set up —> Scan device QR
code and select / input your Wi-Fi name and password —>
Press start and the connection will be ok soon;
4.Quit APP , wait 30 seconds (device restart automatically)
and get ready (back red light always on);
5.Enter APP again, add new online camera, search and
choose the connected camera; Then check the camera in
rst page of APP.

1
Indoor unit Outdoor unit

Overview
The 1080P weather station Wi-Fi camera is a multifunctional
fashionable weather station with an integrated 1080P high
–denition hidden Wi-Fi camera.
First, it can be used as a normal weather station to detect
and show both outside and inside temperature and humidity,
and display time/date/moon phase;
Second, the device can be easily connected to Wi-Fi and
watch live video, or remotely take photo and video by
APP
in smartphone anywhere in the world;Also, it supports Point
to Point (P2P)function,connected by
APP to smartphone
for local live video without Wi-Fi.
Third, the item also support motion detect alarm function,
cycle recording and work when charging.
2

3
a Indoor unit an Outdoor unit a Back cover an AC power adapter
a USB cord a CD driver a User manual Three screws
In the box

4

5

6

7

8

9
Getting Started of Weather station part
Remove the protective seal from the battery and connect
power, LCD screen will be lighted on.
Insert 2pcs*AAA batteries for outdoor unit, it will be powered
on automatically and send out current actual weather info in
1 minute. Indoor unit will get and show this info on the indoor
unit LCD screen.
Tips: 1. Outdoor unit is NOT water or weather proof;
2. Please power on outdoor unit in 3mins after indoor
unit turned on; Or, indoor unit need to be totally
restarted (plug off power and take out battery) for
setting the connection of both units.

10
TIME: Long press to set time/date
ALM: Long press to set alarm
UP : Up key(Press to change from 12 hour format
time to 24 hour)
DN : Down key(Press to change from Centigrade
degree to Fahrenheit)
MAX/MIN:Press to show the max or min temperature and
humidity of the day
ALERT: Long press to set outdoor max/min temperature
alarm
ON/OFF: Turn on/off the backlight

11
[ Pro iCam ] APP QR code
Getting Started of Wi-Fi camera part
Step1: Download and install APP
Scan below QR code or search and download free APP
named “Pro iCam” in Apple APP store, Google play or
Electronic market, and install it.

12
Step2: Connect power and turn on device
Remove the protective seal from the battery and plug it
into AC power using the included adapter; Turn on right
side switch, and wait for 2 minutes. (Blue light always on,
red light blink slowly.)
Step 3: Connect Wi-Fi
1. Open smartphone setting, search
and connect mobile Wi-Fi to the
wireless signal named “YM……”,
wait Wi-Fi connected, and phone
status bar appear Wi-Fi symbol.

13
2. Open APP, press symbol + at the top right corner, select
“Setup camera Wi-Fi connection”.

14
3. Scan QR code(in the back of device) or input to add
device UID , input your Wi-Fi name and password(Both
are case – sensitive).Press Start conguring Wi-Fi.
When it shows (The WIFI connection has been congured),
quit APP (and device restart automatically and ready again
in 30 seconds).

15
4.Enter APP and select “Add new online camera”. Then
search for new camera and press ok . You can see the
camera in the rst page now. When device connected
Wi-Fi, red light will be always on.Then all is ok now!

16
P2P(point to point) mode, and P2P mode to Wi-Fi setting.
Plug in power —> Turn on indoor unit’s switch, wait for 2mins.
P2P mode (when there is no Wi-Fi )
1. Open smartphone setting, search
and connect mobile Wi-Fi to the
wireless signal named “YM……”,
wait Wi-Fi connected, and phone
status bar appear Wi-Fi symbol.

17
2. Open APP, press symbol + at the top right corner, select
“Add new online camera”. Search for new camera and press
ok. Then back to the rst page to see the live camera and
do the following setting.

18
P2P mode to Wi-Fi (The second way to connect Wi-Fi)
1.Press the after the camera or long press the
camera and select Advance Cong ,select Wi-Fi Cong.