AFG 2.0AS Assembly and User manual

HOME GYMASSEMBLY
AND USER'S GUIDE

CONGRATULATIONSand THANKYOUforyourpurchaseof this AFGserieshomegym!
Whether your goal is to tone your muscles, increase your strength or simply enjoy a fuller, healthier
fifestyle, an AFGseries home gym can help you attain it -adding club-quafity performance to your
at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier,
faster. Because we're committed to designing fitness equipment from the inside out, we use only the
highest quafity components. It's a commitment weback with one of the strongest warranty packages
in the industry.
Youwantexerciseequipmentthat offers the most comfort,the best reliability and thehighest quality
in its class.
AnAFGhomegymderivers.
iiiiii _i I
[IBLE QF OQRTERTS
I I
Important Precautions 4
Assembly 5
Before You Begin 18
Conditioning Guidelines 19
Troubleshooting &Maintenance 24
Limited Warranty 26
i i i
CONTACTINFORMATION Back Panel
12/28/07 10:15:43 AM

iii i_iill il ii_ ii
5
_ i i i I
ii ¸ _
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
SAVETHESEINSTRUCtiONS
Read aft instructions before using this home gym, Basic precautions should always be followed, including the
following: Read aft instructions before using this home gym, It is the responsibility of the owner to ensure that
aft users of this home gym are adequately informed of aft warnings and precautions, If you haveany questions
after reading this manual, contact customer service at the number listed on the back cover of this manual
,Closesupervision is necessarywhenthis homegym is used by,on, or near children, invalids, or disabledpersons.
,Use this appliance (or homegym) onlyfor its intended useas describedin this manual Donot use attachments not
recommendedby the manufacturer.
oNeverdrop orinsert any objectinto anyopening.
,, If you experienceany kind of pain, including but not limited to chest pains, nausea,dizziness, or shortnessof breath,
stop exercisingimmediately and consult your physician before continuing.
,, Donot wearclothes that might catch onanypart of the homegym.
,, Always wearathletic shoeswhile using this equipment.
,Donot jump on the homegym.
,At no time should more than oneperson be on homegym while in operation.
,Thehome gym should not be used by persons weighing more than 300 pounds. Failure to comply win void the
warranty.
,Thehomegym is intended for in-home use only.Do not use this home gym in any commercial, rental, school or
institutional setting. Failure to complywill voidthe warranty.
,, Donot useoutdoors.
IMPORTANT..READTHESESAFETYINSTRUCTIONSBEFOREUSE!
i_/i_/i!_ii_/i_ii_5_i_iii_:_i_ii_ii_ii!_i_ii_i_iii!_iii_iii_i__iii_/i_:_ii_ii_i_i:_i:iii/_iii_i_!ii_i_iii_i/_i_!i_iii!_ii_:ii_i_i_i_i_ii___i!_i_i_i:_iii_iiiiii_!_i_
i_51_i_i_i_:_iii_!_i_i!iii!i_i_ii_i_ii___i_iiii!__i_i_):_ii__i_ii_/i_iii_ii_!_i_i__i_i_iii_ii/_i_i:_i_i_ii_iii___!:_i:i_!_i_!i_i_i_iii_i__i:i_i_i_i_ii_iii!_i_5_i___i_iii_/_iil
tofoflowtheassemblyinstructionscorrectlyand tomak e sureaftpartsarefirmlYtightened.Iftheassembly
instru_tionsarenotfoMowedcorrect,_thehom_zymco.l_haveframePa_tsthat
seemlooseandmaycauseirritatinznoises,Thereshouldbenoside_to-_ideplayintheframeuprizhts,lf
there is any play in these areasl the homegym has not been proPerly assembled To prevent flama eto the
home correctiveactio's
UNPACKING
Place the home gym carton on a level flat surface, It is recommended that you place a protective covering
on your floor, TakeCAUTIONwhen handling and transporting this unit. Never open box when it is on its
side, Unpack the unit where it win be used, FAILURETOFOLLOWTHESEINSTRUCTIONSCOULDRESULTIN
INJURY!
Beforeroceedin ,finyo,hOme
anfl mofle! name Iocatef! on the left rear s!de of the base
frame add enter it in the space providefl below,
MODELNAMEIN OXES OW:
/
Refer to the SERIALNUMBERand MODELNAMEwhencallin_ for service.
Also enter this serial number onyour Warranty Card.
/

_ i i i I
W
il__iiii_ii!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 6-7
UPPERPULLEYASSEMBLY
DUALFLOATINGPULLEYBRACKET
LATPULLDBWNBAR
LARGE"O" RING
CENTERSUPPORTFRAME
WATERBOTTLEHOLDER
CABLE"B"
SEATHEADPAD
HANDLES
RADIALARMADJUSTMENTPiN
SEATBACKPAD
SEATBACKADJUSTMENTKNOB
BICEPCURLBAR
SEATBOTTOMPAD
WEIGHTSHROUD
CABLE"C"
GUIDEROD
RADIALARMASSEMBLY
ACCENTPIECE
BAYONET
WEIGHTSELECTIONPiN
RIGHTSUPPORTFRAME
-- SINGLEFLOATINGPULLEYBRACKET
-SEATASSEMBLYSAFETYPiN
SEATWELDMENT
LEGEXTENSION/CURLDOWNTUBE
ADJUSTMENTBAR
SEATHEIGHTADJUSTMENTKNOB
FOAMROLLERS BASEFRAME
ADJUSTABLEFOOTPLATE > CABLE"B"
roo sINgUDfD .... i
[] 8rnrnFlatWrench [] 13rnrn/17rnrnFlatWrench [] 5rnrnAIlenWrench
[] 19 rnrn Flat Wrench [] 4 rnrn Allen Wrench [] 6 rnrn Allen Wrench
[] 1 Bayonet [] 1 Center Support Frame [] 2 Single Floating Pulley Bracket
[] 1 Bicep Cuff Bar [] 1 Seat Weldment [] 1 UpperPulleyAssernbly
[] 1 Seat Back Pad [] 2 WeightShrouds [] 1 Seat Bottom Pad
[] 1 Base Frame [] 2 Guide Rods [] 1 NylonAnkle Strap
[] 1 Left Support Frame [] 1 Weight Selection Pin [] 2 Handles
[] 1 Right Support Frame [] 1 5 Ib, Increment Weight [] 1 Lat Pulldown Bar
[] 1 Seat Back Adjustrnent Bar [] 1Dual FIoating Pulley Bracket [] l Ol-lardware Bags
[] 1 Radial Arrn Assernbly [] 1 Set Of Weight Plate Decals [] 2 Foarn Rollers
[] 1 ExerciseFlipbook [] 1 Center Connection Tube [] 1 Seat Head Pad
[] 2 Seat Adjustment Pins [] 1 Lower Connection Tube [] 2 Side Connection Tubes
[] 1 Leg Roller Support Tube [] 1 LowerPulley Bracket [] 1 Upper Mounting Bracket
[] 1 WaterBottle Holder [] 2 Upgrade Spacers [] 1 Lower Mounting Bracket
[] 1 Seat Bottom Adjustment Bar [] 2 Accent Pieces
Contactinforrnationis locatedonthe backpanel of this manual.
Fora completeexplodeddiagram, visit usat www,advancedfitnessro_zoujzcorn
NOTE: Durin_ each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely ti_htenin_ any ONEbolt,
/VOTE:A light application of grease may aid in the installation of hardware, Any grease, such as lithium bike
grease is recommended,
BOLT(A) BOLT(B)
_75rnrn _ _ 95rnrn
Qty:2 Qty:4
FLATWASHER(C) _) ARCWASHER(D) (_NYLON
Qty:4 Qty:8 NUT(E)
Qty:6
LEFTSUPPORTFRAME
CENTER
SUPPORTFRAME
BASEFRAME
i
ARCWASHER(D)
NYLONNUT(E)
i i
@
' *--- LOWERPULLEYBRACKET
t ÷_ FLATWASHER(C)
°_ NYLONNUT(E)
A
B
C
D
E
Place BASEFRAME
on floor in desired
location.
OpenHARDWAREBAG
1.
AttachRIGHT
SUPPORTFRAMEto
right sideof BASE
FRAMEusin_2 BOLTS
(B),4 ARCWASHERS
(D)and2NYLONNUTS
(E).
AttachLEFTSUPPORT
FRAMEtoleft sideof
BASEFRAMEusin_
2 BOLTS(B),4 ARC
WASHERS(D)and2
NYLONNUTS(E).
AttachCENTER
SUPPORTFRAME
andLOWERPULLEY
BRACKETto BASE
FRAMEusin_2 BOLTS
(A),4 FLATWASHERS
(C)and2NYLONNUTS
(E).
NOTE:Ensurethat
theLOWERPULLEY
BRACKETispositioned
as shownin dia_rarn.
ii i iiii
/
12/28/07 10:15:50 AM

iI_ ii_i i
_ i i i I
H
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 8-9
_YLON
NUT(E)
Qty:4
BOLT(B) _ARCWASHER(D)
95mm _Qty:12
Qty:4
BOLT(F) _LARGE"O"RING
_25mm Qty:l
V)
Qty:4
ARCWASHER(D)
CENTER
SUPPORTFRAME
SEAT
WELDMENTSET \
\
ARCWASHER(D)
NYLON NUT(E)
UPPER PULLEY
ASSEMBLY
ARCWASHER(D)
(A)
......_. LEFTSUPPORT
FRAME
RIGHT
SUPPORT
/FRAME
SEAT
ADJUSTMENT/
PIN
t
SEATSAFETYPiN
A
B
C
D
E
F
G
OpenHARDWAREBAGZ
Slide LARGE"0" RING
onto CENTERSUPPORT
FRAMEas shownin
diagram.
AttachUPPERPULLEY
ASSEMBLYtoCENTER
SUPPORTFRAMEusing
4 BOLTS(F)and4 ARC
WASHERS(D). Tighten
this hardware.
Attach UPPERPULLEY
ASSEMBLYtoRIGHT
MAINSUPPORTFRAME
using2 BOLTS(B),4
ARC WASHERS(D)and2
NYLONNUTS(E).
AttachUPPERPULLEY
ASSEMBLYtoLEFT
SUPPORTFRAMEusing
2 BOLTS(B),4ARC
WASHERS(D),and2
NYLONNUTS(E).
Install SEATWELDMENT
SETonto posts on
CENTERSUPPORTFRAME
as shown in diagram, and
insert SEATSAFETYPIN.
Install SEATAD]USTMENT
PINintoSEATWELDMENT
SETas shownin
diagram.(Fullythread
into SEATWELDMENT
SETafter SEATBOTTOM
AD]USTMENTBARis
installed.)
(_ FLAT
WASHER(C)
Qty:10
BOLT(H)
20 mm
Qty:4
NYLON BOLT(F)
NUT(E)_ 25 mm
Qty:2 Qty:2
(_ FLAT
WASHER(I)
Qty:2
BOLT(G)_ NYLON
92mm _NUT(K)
Qty:l Qty:1
BOLT(J) _LOCK
83rnrn _WASHER(L)
Qty:2 Qty:2
RADIALARMASSEMBLY CENTER
SUPPORT-_
FRAME
FLATWASHER
NYLONNUT(E)
NYLONNUT(K)\
NYLONNUT(E)\o.
CENTER
CONNECTION
TUBE
LEFT
CONNECTION
--/ TUBE
BOLT(J) BOLT(J)
LEGROLLER_ BOLT(G)
SUPPORTTUBE FLATWASHER (1)
FLAT LOCK
WASHER(C)WASHER(L)
RADIALARM
ASSEMBLY
(c)
(H)
"-_.. RIGHTCONNECTIONTUBE
LOWER
CONNECTIONTUBE
AOpenHARDWAREBAG3.
B RemoveSTOPPERfromfrontsideof RADIALARMASSEMBLYandreinstaflonbackside.
TightenbothSTOPPERS.
C AttachRADIALARMASSEMBLYto CENTERSUPPORTFRAMEusing2 BOLTS(F),2 LOCK
WASHERS(L)and2 FLATWASHERS(C). Tightenthis hardware.
DAttachRIGHTSIDECONNECTIONTUBEtoSEATWELDMENTSETand toLOWER
CONNECTIONTUBEusing2 BOLTS(H)and2 FLATWASHERS(C),as shownin diagram.
E Repeatonleft side.
F AttachCENTERCONNECTIONTUBEtoSEATWELDMENTSETandtoLOWERCONNECTION
TUBEusing2 BOLTS(1),4 FLATWASHERS(C)and2 NYLONNUTS(E).
G AttachLEGROLLERSUPPORTTUBEtoLOWERCONNECTIONTUBEusing 1BOLT(G),2
FLATWASHERS(I) and 1 NYLONNUT(K).Tightenall hardwarein Step3.
/
i(i /
12/28/07 10:15:56 AM

iI_ ii_i i
:i i iI
W
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 10-11
A
B
C
D
FLATWASHER(C)
Qty:12 (_ NYLON NUT(E)
Qty:2
BOLT(F) _LOCKWASHER(L)
25 nlm _Qty:2
Qty:10
BOLT(M) BOLT(N)
_65mm (_ 25mm
Qty:2 Qty:2
CHROMEWASHER(U)
Qty:2
SEATHEADPAD
FLATWASHER
SEATBACKADJUSTMENTBAR
SEATBACKPAD
\
SEATBOTTOMPAD \
NYLON
NUT
BOLT
FLATWASHER(C)\
CENTERSUPPORT
FRAME
jjfi
BOLT(F)
BOLT(N)_
FLAT _-. SEATBACK
WASHER(C) _ADJUSTMENTPiN
jjJJ
•r_ j S
SEATBOTTOM/.................."-_ ROLLER
ADJUSTMENTBAR BOLT(M) ;HROMEWASHER(U)
LOCKWASHER(L)
LEGROLLER
OpenHARDWAREBAG4. SUPPORTTUBE _BOLT(F)
WATER
BOTTLE
HOLDER
AttachSEATHEADPADtoCENTER
SUPPORTFRAMEusing4 BOLTS(F)and4 FLATWASHERS(C),as shownin diagram.
Install SEATBACKADJUSTMEHTPINin CENTERSUPPORTFRAME.(Fullythreadinto
CENTERSUPPORTFRAMEafter SEATBACKAD]USTMEHTBAR is installed.)
AttachSEATBACKPADtoSEATBACKAD]USTMEHTBARusing4 BOLTS(F)and4FLAT
WASHERS(C),andinsert into CENTERSUPPORTFRAMEas shownin diagram.
EAttach SEATBOTTOMPADto SEATBOTTOMADIUSTMEHTBARusing 2 BOLTS(M) and 4
FLATWASHERS(C) and 2 NYLONNUTS(E), and insert into SEATWELDMENTas shown in
diagram.
FInstallFOAMROLLERSontoLEGROLLERSUPPORTTUBEusing2 BOLTS(F),2 LOCK
WASHERS(L)and2 CHROMEWASHERS(U),as shownin diagram.
GAttachWATERBOTTLEHOLDERtoCENTERSUPPORTFRAME using2BOLTS(H).
tt Tightenall hardwarein Step4.
A
B
C
D
E
F
G
H
FLATWASHER(C)
Qty:8 _YLON NUT(E)
Qty:4(_ FLATWASHER(I) _NYLON
Qty:4 NUT(K)
Qty:2
BOLT(0)
lOOmm
Qty:2
BOLT(P)
_._) 70mm _-
Qty:2
RUBBER
BUMPER
Qty:2
BOLT(Q)
40 mm
Qty:2
OpenHARDWARE BAG 5.
AttachLOWERMOUNTINGBRACKET(after
removingpre-instafledguiderodbolts)toBASE
FRAMEin desiredlocation,using2 BOLTS(P),
4FLATWASHERS(C)and2 NYLONNUTS(E).
NOTE:Referto page25 for mountingpositions.
Position each GUIDERODso that the mounting
holes are in the upperposition, and insert
GUIDERODSinto corresponding sleeves in
LOWERMOUNTINGBRACKET.
SlideI UPGRADE SPACER and thenslide]
RUBBER BUMPER ontoeachguiderod,as
shown in diagram.
Install each WEIGHTPLATEonto guide rod as
shown in diagrarn. Ensure than the weight pin
selector slot is positioned downward and in
same direction.
Install BAYONETonto GUIDERODSas shown in
diagram.
Re-installGUIDEROD bolts intoLOWER
MOUNTINGBRACKET.
Instafl UPPERMOUHTIHGBRACKETto topof
GUIDERODS,asshownin diagram,using2
BOLTS(Q),4 FLATWASHERS(I) and2 NYLON
HUTS(g).
UPPERMOUNTINGBRACKET
\
FLATWASHER(i)\
NYLONNUT(K)
BOLT(0)
j/ UPPER
PULLEY
ASSEMBLY
BOLT(Q)
/
\ FLAT
WASHER(I)
_-BAYONET
WEIGHT
/PLATES
BASEFRAME
UPGRADE
SPACER
!
\
LOWERMOUNTING
BRACKET
FLATWASHER (C)
NYLONNUT(E)
AttachUPPERMOUHTIHGBRACKETtoUPPERPULLEYASSEMBLYusing2 BOLTS(0),4
FLATWASHERS(C),and2 NYLONNUTS(E).
NOTE..Ensurethat the UPPERMOUHTIHGBRACKET'spositioncorrespondsto theposition
of theLOWERMOUNTINGBRACKETbeforesecuringit to theUPPERPULLEYASSEMBLK
]Tightenall hardware.
/
iii _ i i
ii _ _ii ii
12/28/07 10:16:08 AM

iI_ ii_i i
_ i i i I
ii¸_
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
2.0 AS rev 1.2.indd 12-13
A
B
C
D
E
F
G
H
FLATWASHER(C)
Qty:8 (_ YLON NUT(E)
Qty:4
BOLT(0)
lOOmm
Qty:2
FLATWASHER(I)
Qty:4_YLON NUT(K)
Qty:2
BOLT(P)
_70mm _)
Qty:2
RUBBER
BUMPER
Qty:2
BOLT(Q)
40 mrn
Qty:2
OpenHARDWAREBAG5. UPPERMOUNTINGBRACKET
AttachLOWERMOUNTINGBRACKET(after
removingpre-installedguiderodbolts) to BASE
FRAMEin desiredlocation,using2 BOLTS(P),4
FLATWASHERS(C)and2 NYLONNUTS(E).
NOTE:Referto page25 for mountingpositions.
Position each GUIDERODso that the mounting
holes are in the upper position, and insert
GUIDERODSinto corresponding sleeves in
LOWERMOUNTINGBRACKET
Slide ] RUBBERBUMPERonto each guide rod,
as shownin diagram.
........y UPPER
PULLEY
ASSEMBLY
BOLT(Q)
/
\FLAT
WASHER(J)
--BAYONET
WEIGHT
PLATES
Install eachWEIGHTPLATEontoguiderodas
shownin diagram.Ensurethan the weightpin
selectorslot is positioneddownwardand in
samedirection.
Install BAYONETonto GUIDERODSas shown in
diagram.
Re-installGUIDERODbolts intoLOWER
MOUNTINGBRACKET
Instafl UPPERMOUNTINGBRACKETto top of
GUIDERODS,as shown in diagram, using 2
BOLTS(Q),4 FLATWASHERS(I), and 2 NYLON
NUTS(g).
BASEFRAME
RUBBER
BUMPER
\
LOWERMOUNTING
BRACKET
FLATWASHER (C)
NYLONNUT(E)
AttachUPPERMOUNTINGBRACKETto UPPERPULLEYASSEMBLYusing2 BOLTS(0), 4
FLATWASHERS(C),and2 NYLONNUTS(E).
NOTE:Ensurethat theUPPERMOUNTINGBRACKET'spositioncorrespondsto theposition
of theLOWERMOUNTINGBRACKETbeforesecuringit to theUPPERPULLEYASSEMBLY.
]Tightenall hardware.
CABLEA
Qty:1
DUALFLOATING
PULLEYBRACKET
SINGLEFLOATING
PULLEYBRACKET
\
BAYONET
CABLEA
WEIGHTSELECTION
PINTETHER BAYONET
AOpenHARDWARE BAG B.
B InstallSINGLEFLOATINGPULLEY
BRACKET ontooneendofCABLEA.
C
D
E
RemoveTHREADEDSCREWand NUT
from other end of CABLEA.
Route CABLEAthrough pulleys as
shown in diagram.
NOTE:DUALFLOATINGPULLEY
BRACKETmust be installed after
CABLEAis routed through first pulley.
After CABLEArouting is complete,
instafl THREADEDSCREWandNUT
ontocableendand threadthrough
WEIGHTSELECTIONPINtetherinto
BAYONET
NOTE:Alwaysmaintain at least 1/2"
of CABLEASCREWthreadedinto
BAYONETforsafety.
i iiii i
12/28/07 10:16:21 AM

iI_ ii_i i
:i i iI
W
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 14-15
A
B
C
D
CABLEB
Qty:1
CLEVIS
WASHER
NUT
HOOK
HANDLE
BALLSTOP
RING
WASHER
SCREW
SINGLEFLOATING
PULLEYBRACKET CABLEB
/
OpenHARDWAREBAGZ
RemoveNUT,WASHERS,SCREW,HOOKCLEVISand BALLSTOPfrom oneend of CABLEB.
RouteCABLEB through the pulley system in the RADIALARMASSEMBLYas shown in
diagram.
NOTE:Threadcable through SINGLEFLOATINGPULLEYbetween each arm of the RADIAL
ARMASSEMBLY.
After CABLEBrouting is completereplaceBALLSTOP,CLEVIS,HOOKSCREW,WASHERS
andNUTonendofcable.
NOTE:Ensurethe "0"RINGSarepositionedat theendsof CABLEBagainst theBALL
STOPS.
E HookHANDLESon to cable using the 2 HOOKS.
CABLEC
Qty:1
BALLSTOP
CLEVIS
WASHER
HOOK
LATBAR
WASHER
SCREW
LATBAR
UPPERPULLEY
ASSEMBLY
\CABLEC
SINGLEFLOATING
PULLEYBRACKET
A
B
C
D
OpenHARDWAREBAG8.
RemoveNUT,WASHERS,SCREW,HOOK,CLEVISandBALLSTOPfromoneendof CABLEC.
Install CABLECas shown in diagram. Ensurethat the SINGLEFLOATINGPULLEYBRACKET
is installed after passing through two upper pulleys.
After CABLEC routing is complete replace BALLSTOP,CLEVIS,HOOKSCREW,WASHERS
and NUTon end of cable.
NOTE:Ensurethe "0" RINGSare positioned at the endsof CABLECagainst the BALL
STOPS.
E Install lat bar using the2 HOOKS.
/
iii _ i i
ii _ _ii ii
12/28/07 10:16:33 AM

iI_ ii_i i
;i i iI
W
il__iiii_ii!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 16-17
CABLED
Qty:1
SINGLEFLOATING
PULLEYBRACKET
DUALFLOATING
PULLEYBRACKET
CABLED
1
CABLED
/
PRE-ATTACHEDLEGEXTENSIONCABLE
AOpenHARDWAREBAG9.
BRemoveNUT,WASHERS,SCREW,HOOKCLEVISand BALLSTOPfrom the end of CABLED.
C Instafl CABLED as shown in diagram.
D After CABLEDrouting is complete replace BALLSTOP,CLEVIS,HOOK,SCREW,WASHERS
and NUTon end of cable.
NOTE:Ensure the "0" RINGis positioned at the end of CABLED against the BALLSTOP.
E Attach CABLEDto PRE-ATTACHEDLEGEXTENSIONCABLE.
BOLT(R)
@_ lOmm
Qty:20 (_ FLATWASHER(S)
Qty:32 NUT(T) Qty:12
.....-'""
....'"
--'
.,.-"
_-_'" ........-
AOpenHARDWAREBAG Ill.
B Instafl ACCENTPIECESinside the WEIGHTSHROUDSusing !2 BOLTS(R), 24 FLATWASHERS
(S) and 12 NUTS(T) as shown in diagram.
C Instafl WEIGHTSHROUDSas shown in diagram, using 8 BOLTS(R) and 8 FLATWASHERS(S).
/

iI_ ii_i i
W
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 18-19
CONGRATULATIONS!onchoosingyourhomegym.You'vetakenanimportantstepindeveloping
and sustaining an exercise program! Your home gym is a tremendously effective tool for achieving your
personal fitness goals. Regular use of your home gym can improve the quality of your life in so many
ways.
HEREAREJUSTAFEWOFTHEHEALTHBENEFITSOFEXERCISE:
•Improved Muscle Toneand Strength
•Increased Daily Energy Levels
•A Healthier Heart
• Weight Loss
Thekey to reaping these benefits is to develop an exercise habit, Yournew homegym will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your home gym in the comfort of your home. This guide provides you with basic
information for using and enjoying your new machine.
LOCATIONOFTHEHOMEGYM
Place the home gym on a level surface. There should be J foot of
clearance behind the home gym, 3 feet on each side and 3 feet in front.
Do not place the home gym in any area that will block any vent or air
openings. Thehome gym should not be located outdoors. 3feet _ ,
Back
' 3 fear
Front
3feet
SEATASSEMBLYPIN
gym: Failure
PROPERUSAGE
Make sure to follow the MAINTENANCEschedule in this manual. Stop your workout immediately if you feel pain,
faint, dizzy or are short of breath.
ALWAYSCONSULTYOURPHYSICIANBEFOREBEGINNINGANEXERCISEPROGRAM.
flOWOFTEN?(Frequencyof Workouts)
TheAmerican Heart Association recommends that you exercise at least 3 to 4 days per week to maintain fitness.
If you have other goals such as weight or fat loss, you will achieve your goal faster with more frequent exercise.
Whether it's 3 days or 6 days, remember that your ultimate goal should be to make exercise a fifetime habit.
Many people are successful staying with a fitness program if they set aside a specific time of day to exercise.
It doesn't matter whether it's in the morning before breakfast, during lunch hour or while watching the evening
news. What's more important is that it's a time that allows you to keep a schedule, and a time when you won't
be interrupted. Tobe successful with your fitness program, you have to make it a priority in your fife. So decide
on a time, puff out your day planner and pencil in your exercise times for the next month!
HOWLONG?(Durationof Workouts)
Foraerobic exercise benefits, it's recommended that you exercise from between 24 and 60 minutes per session.
But start slowly and gradually increase your exercise times. If you've been sedentary during the past year, it may
be a good idea to keep your exercise times to as tittle as 5 minutes initially, Yourbody will need time to adjust
to the new activity, If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective.
HOWHARD?(Intensityof Workouts)
How hard you workout is also determined byyour goals. If you useyour home gym to prepare for a 5tf run, you will
probably work out at a higher intensity than if your goal is general fitness. Regardless ofyour long term goals,
always begin an exercise program at low intensity, Aerobic exercise doesnot have to be painful to be beneficial!
Thereare two ways to measure your exercise intensity, Thefirst is by monitoring your heart rate, and the second
is by evaluating your perceived exertion level (this is simpler than it sounds!).
PERCEIVEDEXERTIONLEVEL
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, ifyou
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath it's time to slow down.
Always be aware of these warning signs of overexertion.
GENERALSTRENGTHTRAININGGUIDELINES
•It is recommended thatyou perform at least 10q5 minutes of cardiovascular exercise before beginningyour
strength routine in order to warm the muscles, increase the heart rate, and prepare your body for strength
training.
•Always raise and lower the weight in a smooth, slow, and controflefl motion.
•Trynot to holdyour breath during strength training exercises. It is recommended thatyou exhale as you raise
the weight and inhale asyou lower the weight.
•It is recommended that each muscle group be allowed to rest 48 hours between strength training.
•Complete each strength routine with a few simple stretches to maintain flexibility, and aflow your body to
cool-down after your session.
/
i ii
m_i i_
12/28/07 10:16:46 AM

iI_ ii_i i
i i
iii_i i
il__iiii_ii!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 20-21
Whatis TargetNeartRateZone?
TargetHeart Rate Zone reds you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
TargetZone wifl vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
TargetHeart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
EXAMPLE:
Fora 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Heart Rate =108 Beats Per Minute, 75% of maximum
Heart Rate =135 Beats Per Minute.
ALWAYSCONSULTYOURPHYSICIANBEFOREBEGINNINGAN EXERCISEPROGRAM.
$TRETCNFIRST
Before using your product, it is best to take a few minutes doing a few gentle stretching exercises.
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into
each of these stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to
bounce while doing these stretches.
1.STANDINGCALFMUSCLESTRETCH
Stand near a wall with the toes of tour left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the waft with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
2. STANDINGQUADRICEPSSTRETCH
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
I.
_i ¸ _-
i i.i
J/! !
/..... ! i
/i
3.SITTINGHAMSTRING&LOWERBACKMUSCLESTRETCH
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
/
ii i i/
/
i ii
12/28/07 10:16:47 AM

iI_ ii_i i
i i
iii_i i
W
il__iiii_ii!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 22-23
THE IMPORTANCEOFWARMUP& COOLDOWN
WARMUP
Always perform 10-15 minutes of aerobic activity before beginning your strength training session. This
warm-up will limber your muscles and prepare them for more strenuous exercise. Make sure that you warm-
up on your product at a slow pace. The warm up should gradually increase your heart rate into your heart
rate training zone and increase core body temperature.
COOLDOWN
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Yourcool-down period should consist of repeating the stretching exercises listed above
to loosen and relax your muscles.
An important step in developing a long term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle tone and/or strength? Reduce stress? Knowing what
your goals are will help you develop a more successful exercise program. Below are some common exercise
goals:
•Weight Loss -lower intensity, longer duration workouts
•Improve Body Shape and Tone-interval workouts, alternate between hi and low intensities
•Increased Energy Level -more frequent daily workouts
•Improved Sports Performance -high intensity workouts
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
Themore specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weeklysegments. Longer term goals can lose some of the immediate motivation
benefits. Short term goals are easier to achieve.
'DATE' SET I'
EXERCISE WEIGHT REP$ WEIGHT REP$ WEIGHT REP$
DATE
EXERCISE WEIGHT REP$ WEIGHT REP$ WEIGHT REP$
BATE ISET I'$ET 2 SET3
EXERCISE WEIGHT REP$ WEIGHT REP$ WEIGHT REP$
ii
5
ii i iiii
5
i ii
iii_ ii i i
12/28/07 10:16:48 AM

iI_ ii_i i
5
_ i i i I
W
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
i/_ii
2.0 AS rev 1.2.indd 24-25
Yourhomegym is designed tobe reliable and easyto use.However,if you experbncea problem,please reference
the troubleshootingguide listed below.
PROBLEM:Thecables feel rough and are noisyduring use.
SOLUTION: Verifythefoflowing-
IS THEREANYNOTICEABLEDAMAGETOTHECABLES?
IF YES..
,' Contactcustomer techsupport and replacethe cable(s).
IF NO:
,Verifythat all cables are securedinto the pulleys.
oVerifythat the weight stack guide rods are lubricated.
oVerifythat thereis noexcessiveslack in the cables.
NOTE:If there is excessiveslack adjust cable tension (seenextpage)
PROBLEM: Weightselector ph7cannot be hTserted.
SOLUTION,: Verifythefoflowing-
ARETHEHOLESALIGNEDTHROUGHTHEWEIGHTPLATEANDBAYONET?
IF YES:
Verifythat the selectorpin isn't bent or damaged.
IF NO:
,Adjust threadedbolt ontopplate so that the holesin thebayonetalign with the weightplate.
NOTE:Alwaysmaintain at least ½"of weight cable screw threadedinto bayonet forsafety.
the problem;discO,tin'use.
Thefollowing information may be asked ofyou whenyou call. Pleasehave theseitems readily available:
•ModelName
• Serial Number
•Date of Purchase(receipt or credit card statement)
In order for CustomerTechSupportto serviceyour homegym they may needto ask detailed questions about the symptomsthat are
occurring. Sometroubleshooting questions that may be askedare:
• flow long has this problem beenoccurring?
•Doesthis problem occur with everyuse? Withevery user?
•If you arehearing a noise, doesit comefrom the front or the back? Whatkind of noiseis it (thumping, grinding, squeaking,
chirping etc.)?
•flas the machine beenlubricated and maintained per the maintenance schedule?
Answering these and other questions will give the technicians the ability to send proper replacement parts and the servicenecessary
toget you and your AFGhomegym functioning again!
ii! :
Cleanfinessofyour homegym and its operationenvironmentwill keep maintenanceproblemsand servicecalls to a
minimum. For this reason,werecommendthat the following preventivemaintenance schedulebe followed.
AFTEREACHUSE(DALLY)
oWipeupholstery,hand grips, bars, and frame (if needed)with a mild cleaning solution.
EVERYWEEg
,Lubricateguide rods with a spray or gel silicone lubricant.
oInspect cable endsand cable insulation for damage.
EVERYMONTH-IMPORTANT!
oInspectall frame bolts and tighten as needed.
Pleasecontact AFGwith questions about applying lubricant toyour homegym.
ADJUSTINGCABLETENSION
Regularlycheckthe cable tensionofyour homegym.If excessiveslack
exists adjust cable tensionby removing thepulley bolts and moving
oneorboth pulleys to the inner mounting position in the dual floating
pulley bracketand thenreinstalling thepulley bolts. Cabletension
mayalso be adjusted using the threadedcable screwonsingle pulley
bracket and weightstack. Twistthreadedscrew toadjust tensionand
then tighten lock nut.
NOTE:Alwaysmaintain at least ½"of threadedbolt in bayonet.
INNER
MOUNTING
POSITIONS
TWISTSCREWTO _CABLESCREW TWISTSCREWTO _;;;_ CABLESCREW
ADJUSTTENSION,_._J_AND NUT ADJUSTTENSION, _._J_AND NUT
THENTIGHTEN THENTIGHTEN
LOCKNUT LOCKNUT
"_SINGLE PULLEY
BRACKETTHREAD BAYONET
0°POSITION
FRONTORBACKACCESS 300POSITION FRONTORBACKACCESS 1500POSITION FRONTORBACKACCESS 900POSITION LEFTORRIGHTACCESS
Thishomegym allowsyou to choosethe angle of access to the weight selectionpin dependingonhowyou install the
upperand lowermounting brackets, weight plates, and weight shrouds.
NOTE:Makesure the upperand lowermounting bracketare in the same position.
/
i ii
i ii i
12/28/07 10:16:50 AM

FRAME•LIFETIME
AFGwarrants the frame against defectsin workmanship
and materials for the lifetime of the original owner.(The
frameis definedasthe weldedmetal baseof the unit and
doesnot include anyparts that can beremoved.).
WEIGHTCAPACITY=300LBS
PARTS•I0 YEARS
AFGwarrants aft original parts for a period of tenyears
from the date of original purchase, so long as the device
remains in the possessionof the original owner.
LABOR•IYEAR
AFGshaft coverthe labor cost for the repair of the device
for a period of oneyear from the date of the original
purchase, solong as the device remains in the possession
of the original owner.
UPHOLSTERY•I0 YEARS
AFGwarrantstheupholsteryforaperiodoftenyears
fromthedateoforiginalpurchase,solongasthedevice
remainsin thepossessionof theoriginalowner.
EXCLUSIONSANDLIMITATIONS
WhoIScovered:
•Theoriginalownerandis nottransferable.
WhatIScovered:
*Repairor replacementofa defectivepart andis the soleremedyof
the warranty.
WhatISNOTcovered:
•Normalwearand tear,improperassemblyormaintenance,or
installation ofparts or accessoriesnot originallyintendedor
compatiblewith the equipmentassold.
•Damageor failure due toaccident,abuse,corrosion,discolorationof
paint orplastic, neglect,theft, vandalism,fire,flood,wind,lightning,
freezing,or othernatural disastersof anykind,powerreduction,
fluctuation or failure from whatevercause,unusualatmospheric
conditions,collision,introduction of foreignobjectsinto thecovered
unit, or modificationsthat areunauthorizedornot recommendedby
AFG.
• Incidental orconsequentialdamages.AFGis not responsibleor
liable for indirect, specialor consequentialdamages,economic
loss,loss ofprope_ or profits, loss ofenjoymentor use,or other
consequentialdamagesof whatsoevernaturein connectionwith the
purchase,use,repairormaintenanceofthe equipment.
•Equipmentusedfor commercialpurposesor anyuseother than a
single family orHousehold,unlessendorsedbyAFGfor coverage.
•Equipmentownedor operatedoutsidethe USand Canada.
• Defive_ assembly,installation, setupfororiginal or replacement
units orlaboror other costsassociatedwith removalorreplacement
of the coveredunit.
• Anyattempt to repair this equipmentcreatesa risk ofinjury AFG
is not responsibleorliable for anydamage,loss or liability arising
from anypersonalinjury incurredduring the courseof, or asa result
of anyrepairorattempted repairofyour fitness equipmentbyother
than an authorizedservicetechnician. Aftrepairsattempted byyou
onyourfitness equipmentare undertakenATYOUROWNRISKand
AFGshafthaveno liability for anyinjury to the personor property
arising from suchrepairs.
SERVICE/RETURNS
•In-homeserviceisavailablewithinJ50milesofthenearest
authorizedrepaircenter(MileagebeyondJSOmilesfroman
authorizedservicecenteris theresponsibilityoftheconsumer).
• Aftreturnsmustbepre-authorizedbyAFG.
• AFG'sobligationunderthiswarrantyislimitedtoreplacingor
repairing,atAFG'soption,thesameorcomparablemodelatoneof
its authorizedservicecenters.
• AnAFGauthorizedservicecentermustreceiveaftequipment
forwhicha warrantyclaimismade.Thisequipmentmustbe
receivedwithaftfreightandothertransportationchargesprepaid,
accompaniedbysufficientproofofpurchase.
•Replacementunits,partsreconditionedtoAs-newConditionbyAFG
orits vendorsmaysometimesbesuppliedaswarrantyreplacement
andconstitutefulfillmentof warrantyterms.
•Thiswarrantygivesyouspecificlegalrights,andyourrightsmay
varyfromstatetostate.
2.0 AS rev 1.2.indd 26-27

Forfast and friendly service,pleasecontact oneofour
trainedcustomertechniciansviaphone,email orour website.
Customer TechSupport Hotline: [phone]
Emaih comments@advancedfitnessgroup, corn
Website: www.advancedfitness_, corn
Everyemployeeat AFGtakespride in providingyou with a high quality product,
Wewantto knowif youhavea problemand wewantto havean opportunityto correctit foryou,
NOTE:Please read the TROUBLESHOOTINGsection before contacting Customer TechSupport,
Toreceive additional product information, visit us at www,aflvanceflfitnessgroup, com
AFG2.0AS.Rev.L2 ]© 2007AdvancedFitnessGroup]Designed&Engineeredin the U.S.A.]Madein China
2.0 AS rev 1.2.indd 28 12/28/07 10:16:51 AM