manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Weider
  6. •
  7. Home Gym
  8. •
  9. Weider 170 Tc Bench User manual

Weider 170 Tc Bench User manual

Other manuals for 170 Tc Bench

6

This manual suits for next models

1

Other Weider Home Gym manuals

Weider Home Gym Flex Ez1 User manual

Weider

Weider Home Gym Flex Ez1 User manual

Weider 240 Tc Bench User manual

Weider

Weider 240 Tc Bench User manual

Weider 9900i User guide

Weider

Weider 9900i User guide

Weider WESY39522 User manual

Weider

Weider WESY39522 User manual

Weider C 625 User manual

Weider

Weider C 625 User manual

Weider 9015 Quick start guide

Weider

Weider 9015 Quick start guide

Weider Club C 240 Bench User manual

Weider

Weider Club C 240 Bench User manual

Weider 2uprtw/leg Curlcobra Bench User manual

Weider

Weider 2uprtw/leg Curlcobra Bench User manual

Weider Pro 875 User manual

Weider

Weider Pro 875 User manual

Weider PRO 9645 User manual

Weider

Weider PRO 9645 User manual

Weider ADVANTAGE 831.153961 User manual

Weider

Weider ADVANTAGE 831.153961 User manual

Weider 70193 User manual

Weider

Weider 70193 User manual

Weider Pro 137 Bench User manual

Weider

Weider Pro 137 Bench User manual

Weider WECCSY24540 User manual

Weider

Weider WECCSY24540 User manual

Weider Flex 225 User manual

Weider

Weider Flex 225 User manual

Weider 350 Bench User manual

Weider

Weider 350 Bench User manual

Weider Easy Compact 90 User guide

Weider

Weider Easy Compact 90 User guide

Weider PRO 9930 User manual

Weider

Weider PRO 9930 User manual

Weider WEMC07730 User manual

Weider

Weider WEMC07730 User manual

Weider Muscle 131 User manual

Weider

Weider Muscle 131 User manual

Weider WESY5993.2 User manual

Weider

Weider WESY5993.2 User manual

Weider 195 Tc Bench User manual

Weider

Weider 195 Tc Bench User manual

Weider 831.159822 User manual

Weider

Weider 831.159822 User manual

Weider WEBE19300 User manual

Weider

Weider WEBE19300 User manual

Popular Home Gym manuals by other brands

T.D.S. 3501 Assembly instructions

T.D.S.

T.D.S. 3501 Assembly instructions

Body Solid EXM1950 Assembly instructions

Body Solid

Body Solid EXM1950 Assembly instructions

Horizon Fitness OXFORD 6 manual

Horizon Fitness

Horizon Fitness OXFORD 6 manual

Energetics Multi Trainer 5.1 owner's manual

Energetics

Energetics Multi Trainer 5.1 owner's manual

Precor Discovery Series owner's manual

Precor

Precor Discovery Series owner's manual

Matrix MG-PL Series Service manual

Matrix

Matrix MG-PL Series Service manual

Reebok Tbr2i Manuale d'istruzioni

Reebok

Reebok Tbr2i Manuale d'istruzioni

Pure Fitness 8526HE owner's manual

Pure Fitness

Pure Fitness 8526HE owner's manual

Bowflex Sport 001-6961 Assembly instructions

Bowflex

Bowflex Sport 001-6961 Assembly instructions

NordicTrack E8200 Competition Bench Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Bedienungsanleitung

Insportline RW600 user manual

Insportline

Insportline RW600 user manual

Body Solid GHYP-345 owner's manual

Body Solid

Body Solid GHYP-345 owner's manual

Evo TAHOE 5105 user manual

Evo

Evo TAHOE 5105 user manual

ParaBody 40 Assembly instructions

ParaBody

ParaBody 40 Assembly instructions

JLL Ventus Pro Air Power instruction manual

JLL

JLL Ventus Pro Air Power instruction manual

Trojan Colorado 370 user manual

Trojan

Trojan Colorado 370 user manual

Tunturi R25 owner's manual

Tunturi

Tunturi R25 owner's manual

Deltech Fitness DF102 Assembly instructions

Deltech Fitness

Deltech Fitness DF102 Assembly instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

Serial umber
Decal
USERʼS MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. WEEVBE7909.0
Serial No.
Write the serial number in the
space above for reference.
www.iconeurope.com
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
Call: 08457 089 009
From Ireland: 00 (44) 53 9236102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5Q
UK
2
WEIDER is a registered trademark of ICO IP, Inc.
TABLE OF CONTENTS
WAR I GDECALPLACEME T ..............................................................2
IMPORTA TPRECAUTIO S ................................................................3
BEFOREYOUBEGI ......................................................................4
PARTIDE TIFICATIO CHART ..............................................................5
ASSEMBLY ...............................................................................6
ADJUSTME T ...........................................................................11
EXERCISEGUIDELI ES ...................................................................13
PARTLIST ..............................................................................14
EXPLODEDDRAWI G ....................................................................15
ORDERI GREPLACEME TPARTS ..................................................BackCover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of
the warning decal(s). If a decal is
missing or illegible, see the front
cover of this manual and request a
free replacement decal. Apply the
decal in the location shown. ote:
The decal(s) may not be shown at
actual size.
3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your weight bench before using your weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2.
Read all instructions in this manual
and all
warnings on the weight bench
before using
the weight bench. Use the weight bench only
as described in this manual.
3. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
4. The weight bench is intended for home use
only. Do not use the weight bench in a com-
mercial, rental, or institutional setting.
5. Keep the weight
bench
indoors, away from
moisture and dust. Place the weight
bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench
to mount, dismount, and use it.
6. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the weight bench at all times.
8. Keep hands and feet away from moving
parts.
9. Always wear athletic shoes for foot protec-
tion while exercising.
10. The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg)
and a maximum total weight of 510 lbs. (231
kg). Do not place more than 210 lbs. (95 kg),
including a barbell and weights, on the
weight rests. Do not place more than 70 lbs.
(32 kg) on the leg lever. Note: The weight
bench does not include a barbell or weights.
11. Always place equal amounts of weight on
both ends of your barbell when using it.
12. Do not use a barbell that is longer than 5 ft.
(1.5 m ) with the weight bench.
13. When adding or removing weights, always
keep some weight on both ends of the bar-
bell and secure the barbell with the barbell
hooks to prevent the barbell from tipping.
14. When using the leg lever, place a barbell
with the same amount of weight on the
weight rests to balance the bench.
15. When using the backrest in an inclined posi-
tion or a level position, make sure that the
backrest support is inserted completely
through the uprights and turned to the
locked position.
16. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
IMPORTANT PRECAUTIONS
4
Backrest
Weight Rest
Backrest Support
Barbell Hook
Upright
Leg Lever
Weight Tube
Lock Knob
Seat
BEFORE YOU BEGIN
ASSEMBLED DIME SIO S:
Height: 3 ft. 9 in. (114 cm)
Width: 2 ft. 5 in. (74 cm)
Depth: 5 ft. (152 cm)
Lock Pin
Thank you for selecting the new WEIDER®170 TC
weight bench. The weight bench offers a selection of
exercises designed to develop the major muscle
groups of the upper body. Whether your goal is to tone
your body, build dramatic muscle size and strength, or
improve your cardiovascular system, the weight bench
will help you to achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
5
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot
find a part in the hardware kit, check to see if it has been preassembled.
M8 Zinc
Locknut (36)
M10 Locknut
(25)
M6 Washer (20)
M8 Washer (12)
M10 Washer (26)
M8 Zinc
Washer (35)
M8 Locknut
(13)
M6 x 16mm
Screw (21)
M6 x 38mm Screw (22)
M8 x 53mm Bolt (14)
M8 x 38mm
Carriage Bolt (29)
M10 x 55mm Bolt (30)
M10 x 137mm Bolt (28)
M10 x 51mm Bolt Set (24)
PART IDENTIFICATION CHART
6
1.
Attach the Crossbar (3) to the two Uprights (1)
with four M8 x 53mm Bolts (14), four M8
Washers (12), and four M8 Locknuts (13). Do
not tighten the Locknuts yet.
1
3
1
14
12
14
12
13
13
1
13
13
ASSEMBLY
To make assembly easier, carefully read the fol-
lowing information and instructions:
•Assembly requires two persons.
• Because of its weight and size, the weight bench
should be assembled in the location where it will
be used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDE TIFICATIO CHART on page 5.
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Before before beginning assembly, make
sure that you understand the information
in the box above.
7
2. Orient the Base (31) so that the recessed holes
are facing the floor.
Attach the Base (31) to the Front Leg (8) with
two M8 x 38mm Carriage Bolts (29) and two M8
Locknuts (13). Do not tighten the Locknuts
yet.
2
13
13
29
Recessed
Holes
31
8
3. Attach the Front Leg (8) to the Frame (2) with
two M8 x 38mm Carriage Bolts (29), two M8
Washers (12), and two M8 Locknuts (13). Do
not tighten the Locknuts yet.
3
13
2
29
8
12
4. Apply some of the included grease to an M10 x
55mm Bolt (30).
Attach the Frame (2) to the upper set of holes
in the bracket on the Crossbar (3) with the M10
x 55mm Bolt (30) and an M10 Locknut (25). Do
not overtighten the Locknut; the Frame must
pivot easily.
Tighten the Lock Knob (23) into the bracket on
the Crossbar (3) and into the Frame (2).
See the inset drawing. Insert the Lock Pin (40)
into the lower set of holes in the bracket on the
Crossbar (3).
4
2
25
30
23
Grease
40
3
8
5. Apply grease to the barrel of an M10 x 51mm
Bolt Set (24).
Attach the Leg Lever (4) to the bracket on the
Front Leg (8) with the M10 x 51mm Bolt Set
(24). Make sure that the barrel of the Bolt Set
is inserted through both sides of the bracket
on the Front Leg.
24
4
Grease
24
8
5
18
38 4
18
38
10
10
18 38
18
6
6. Insert the two Pad Tubes (10) into the Leg
Lever (4).
Slide two Foam Pads (18) onto each Pad Tube
(10).
Press a Pad Cap (38) into each Foam Pad (18).
7. Orient the Backrest (6) and the two Backrest
Tubes (5) as shown.
Attach the Backrest Tubes (5) to the Backrest
(6) with four M6 x 38mm Screws (22) and four
M6 Washers (20). Do not tighten the Screws
yet.
7
20
20
22
22
5
Holes
6
9
8. Insert the Backrest Support (7) into a set of
holes in the Uprights (1). Make sure that the
locking pin is on the side shown.
Rotate the Backrest Support (7) to the locked
position, with the locking pin wrapped around
the left Upright (1).
Apply grease to an M10 x 137mm Bolt (28).
Attach the Backrest Tubes (5) to the welded
tube on the Frame (2) with the M10 x 137mm
Bolt (28), two M10 Washers (26), and an M10
Locknut (25). Do not overtighten the Locknut;
the Backrest Tubes must pivot easily.
See steps 1–3. Tighten the M8 Locknuts (13)
used in these steps.
See step 7. Tighten the four M6 x 38mm
Screws (22).
9. Attach the Seat (11) to the brackets on the
Frame (2) with four M6 x 16mm Screws (21).
8
9
26 28
5
26
25
7
Welded
Tube
1
2
Locking
Pin
1
11
21
2
Grease
10
10. Attach the Left Barbell Hook (33) to the left
Upright (1) with an M8 Zinc Washer (35) and an
M8 Zinc Locknut (36). Do not overtighten the
Zinc Locknut; the Barbell Hook must pivot
freely.
Attach the Right Barbell Hook (32) to the
right Upright (1) in the same way.
11. Make sure that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in AD USTMENT, starting on page 11.
36 35
36
35
33
32
1
1
10