7
Time, Date and Contrast Setting
- Press and hold SET button ( ) until the display shows "SET TIME".
- Use arrow buttons ( ) to select the correct number.
- Press CALL BACK button ( ) to confirm and move to the next digit.
- Press the SET button ( ) again, the LCD Contrast can be adjusted and
"SET CONTRAST HI" will appear on the display.
- Use arrow buttons to select desired level..
- Press SET button ( ) to exit.
Note
The Setting sequence is "Hour-Minute-Month-Day-Year-Weekday". The weekday is shown
by a number in the left side of the display (1=Monday...7=Sunday). After completion, the
display will show "TOTAL CALLS XX" and the name of the day.
When you receive the first incoming call, time and date will be automatically set if you have
FSK Caller ID service.
To make a call
To make a call, simply pick up the handset and wait for the dialling tone. Then, dial the
desired telephone number with the numeric keys.
To end a call, replace the handset onto the cradle of the base unit, or push the hook switch.
On-Hook Dialling
To Use On-Hook Dialling, you may enter the number to dial before or after pressing the
SPEAKER button( ) . On-Hook Dialling works with phone numbers stored in phone book,
one-touch memory, two-touch memory and redial list.
When the dialled number is answered, simply speak or pick up the handset to talk to the
other end.
Language Selection
In the state of On-hook, do as follows:
– Press and hold DELETE button( )
– While keeping on pressing DELETE button, press and hold CALL BACK button( )
– Continuous to keep DELETE and CALL BACK buttons being pressed together, press arrow
up until current language setting shown on display.
– Use arrow buttons ( ) to select the language.
– Press CALL BACK button( ) to confirm and exit.
