AGILE WBD-18F710 User manual

Agile Table
sch
technical

Conceived to meet the needs of organisations that
employ teams of nomadic knowledge workers, the
Agile Table collection facilitates effective formation
of swarming teams, for short to medium duration
projects.
Agile Tables are proportioned to be comfortably
located within enclosed rooms, or in open plan work
spaces.
Considered services reticulation design ensures
modern technology requirements are met and
re-configurable with minimum down time.
Fixed height Agile Tables support both sitting and
standing postures.
Agile Table design, engineering and material selection is based on Schiavello’s environmental
design principals to reduce environmental impact.

Index
Technical spec 02
Single units 02
Dual units 03-04
Edge profiles 04
Transport and assembly 05
Cable trays 06
Cabling 07
Lettric soft wiring 08
Product specification 09

Agile Table
Technical spec/single units
Agile Tables are constructed from folded 3mm powder coated aluminium
and 33mm MDF tabletops in a range of laminate, veneer and powder coated
finishes. See the Schiavello ColourLab range for full details.
The main tabletops feature a cable management slot running down the centre
in either a standard 50mm or special 100mm width, details on page 06.
Radiused corners and a range of edge profiles complete the tabletop options.
Agile Table bases accommodate power and data and will require floor
mounted services. Cables can then feed into the bottom of the base unit
through access points (as shown on page 06) or directly through the bottom of
the base. Once inside, the base units access to the services is via a removable
shroud door. Cable trays feed the cable management slot, providing power
and data down the length of the table. Agile Table bases also feature
adjustable glides to ensure the unit can be installed level.
Heights:
Single units:
720mm high fixed
1050mm high fixed
Dual units:
Main tabletop
– 720mm high fixed
Secondary tabletop – 1050mm high fixed
Tabletops:
33mm MDF with laminate, veneer or powder coated finish.
Edge options: square, shark nose or premier profile.
(note: premier profile only available with powder coated tabletops.)
Single units
1300mm x 1300mm tabletop
code WBS – F7
720H Fixed
X=400mm
code WBS – F10
1050H Fixed
X=400mm
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X
code WBS – EL
720/1050H Height adjustable
X=368mm
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X

Dual units
3110mm – 1800mm main tabletop
Optional cable management slots are available in widths of 50mm or 100mm.
Please specify cable management slot width with order.
See page 06 for details on cable management.
code WBD – 18F710
720-1050H Fixed
X=400mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
X
X
1650mm
765mm
2550mm
50/100mm
50/100mm
50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
code WBD – 27F710
720 – 1050H Fixed
X=400mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
4010mm – 2700mm main tabletop
Optional cable management slots are available in widths of 50mm or 100mm.
Please specify cable management slot width with order.
See page 07 for details on cable management.
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
Agile Table
Dual units
code WBD – 18EL
720 – 720/1200H Height adjustable
X=368mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
code WBD – 27EL
720 – 720/1200H Height adjustable
X=368mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
code WBD – 18F7
720H Fixed
X= 400mm
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X
code WBD – 27F7
720H Fixed
X=400mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X

Agile Table
Dual units/edge profiles
4910mm
– 3600mm main tabletop
Optional cable management slots are available in widths of 50mm or 100mm.
Please specify cable management slot width with order.
See page 07 for details on cable management.
code WBD – 36F710
720 – 1050H
Fixed
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
X
X
1650mm
765mm
2550mm
50/100mm
50/100mm
50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
Edge profiles
Agile tabletops offer 3 standard edge profiles: square, sharknose and premium.
Premium edges are only available with a powder coat finish.
17mm
33mm
33mm 33mm
12mm
180mm
122mm
Standard square edge Sharknose Premium
(Powder coated
tabletops only.)
code WBD – 36EL
720 – 720/1200H
Height adjustable
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
code WBD – 36F
720H
Fixed
720mm
1050mm
Cable tray
Shroud door
Height
adjustable
section
4010mm
1300mm
2700mm
1300mm
Cable tray
Shroud door
4910mm
1300mm
3600mm
1300mm
Height
adjustable
section
3110mm
1300mm
1800mm
1300mm
Cable tray
Shroud door
Height
adjustable
section
720mm
720mm
720/1200mm
Shroud door
Shroud door Shroud door Shroud door
X
XX
1650mm
765mm 2550mm
50/100mm
50/100mm 50/100mm
1050mm
Shroud door
1300mm
1300mm
Shroud door
720mm
1200mm
720mm
Shroud door Shroud door
X

Agile Table
Tansport and assembly
Transport and assembly
Units are transported bolted to a custom pallet without the tabletops attached. Pallet jacks can wheel the units into position, including
through standard doorways.
Shot bags Shroud doors
C
B
A
A
(mm)
1550 750 1100
1550 750 750
1300 750 750
1300 750 1100
Fixed dual 1050
Fixed dual 720
Fixed 720
Fixed 1050
Height adjustable single
Height adjustable dual
1300 750 750
1300 750 1100
Net
weight (kg)
Gross
weight (kg)
210
195
183
192
187
196
B
(mm)
C
(mm)
352
323
273
300
290
347
Agile Table assembly
– Deliver legs to site and un-crate them.
– Move the legs to their correct installation locations with the
trolley jacks and then unbolt the legs from the pallets.
– Manoeuvre each leg and position it over the electrical
services, power and data boxes, located in the floor.
– To determine the exact location of the second leg, pre-
position the cable tray between the table’s 2 legs, making sure
to fit the tray to the slots in the top steel brackets. The shrouds
will support this until it is screwed into position.
– Rest the tabletop over the frame and align the holes on the
underside to match the prefitted ferrules in the tops.
– Screw all fixings together using the provided screws.
– Affix Keku clips to the holes in the steel support plate using
the Taptite screws provided.
– Fit totem cap by sliding on and ensure Keku clips are firmly
engaged.
– Place shot bag weights into the base of each leg for stability.
– Position the control switch in the centre front of the tabletop.
– Test cycle the height adjustable legs through their full travel
range.
– Fit the shroud doors.
– Wipe the unit down ensuring it is clean and ready for hand
over to the client.
– Remove the pallets and any packaging materials and return
to Schiavello if practicable.
WARNING
– Shot bags must be installed to
the bases of the Agile Table legs to achieve a
conforming stability.
Keku clips
note: Net weight is the product only weight,
Gross weight includes the packaging.
note: Male Keku
clips are tted to
the base unit
facing outward.

Cable reticulation/Lettric soft wiring system
Cable trays/cabling
Cabling
The cabling for Agile Table is fed from the floor into the base unit through either an access
hole in the bottom of the base unit or the access points at the ends of the base unit.
Cable access is at either ends of the base unit or
through the bottom of the bases.
Cable trays
Powder coated steel cable trays are supplied with dual units only.
note: services can be mounted on the tabletop with the Lettric above-desk service
modules or mounted in the cable tray with mounting plates. When mounting in the tray
the cable management, slot width is increased to 100mm to allow hand access.
Cable tray
Shroud door Shroud door
100mm
200mm
122mm
50mm
200mm
122mm
Option 1 – 100mm access Option 2 – 50mm access

Cable reticulation/Lettric soft wiring system
Connectors/tiles/power modules/above
– desk service modules
Lettric soft wiring system
Schiavello’s Lettric soft wiring system delivers power and lighting to the tables. The system is easily connected, disconnected or relocated
without the need to isolate power and with minimal inconvenience. All connections within systems are protected by a positive lock
mechanism to prevent accidental power disconnection.
There are numerous outlet combinations available for each option. Refer to Schiavello Lettric softwiring catalogue for complete product
information and technical specification.
code LEC – EX
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
code LEC – EX – AS
code LEC – SS code
LEC – TP code LEC – JB
Soft wiring connectors
code LEC – EX – CC code LEC – EX – AS – CC
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
code LEC – JB
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
code LEC – BL
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
code LEC – D1 code
LEC – BL – DBL code
LEC – D2 – AF
code LEC – D2
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
Tiles
Power modules
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE
IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
ABOVE DESK SERVICE MODULE
ADM-2P-0D ADM-2P-1D
ADM-2P-2D
ADM-4P-0D ADM-4P-1D
ADM-4P-2D
ADM-2P-3D
ADM-2P-4D ADM-4P-3D
ADM-4P-4D
BELOW DESK SERVICE MODULE
IN-DESK SERVICE MODULE
IDM-2P-0D (2 GPO)
IDM-2P-1D (2 GPO + 1 DATA)
ISM-2P-2D (2 GPO + 2 DATA)
IDM-4P-0D (4 GPO)
IDM-4P-1D (4 GPO + 1 DATA)
IDM-4P-2D (4 GPO + 2 DATA)
IDM-2P-3D (2 GPO + 3 DATA)
IDM-2P-4D (2 GPO + 4 DATA)
IDM-4P-3D (4 GPO + 3 DATA)
IDM-4P-4D (4 GPO + 4 DATA)
BDM-2P-0D (2 GPO)
BDM-2P-1D (2 GPO + 1 DATA)
BSM-2P-2D (2 GPO + 2 DATA)
BDM-4P-0D (4 GPO)
BDM-4P-1D (4 GPO + 1 DATA)
BDM-4P-2D (4 GPO + 2 DATA)
BDM-2P-3D (2 GPO + 3 DATA)
BDM-2P-4D (2 GPO + 4 DATA)
BDM-4P-3D (4 GPO + 3 DATA)
BDM-4P-4D (4 GPO + 4 DATA)
LEC-EX LEC-EX-AS LEC-EX-AS-CC
LEC-EX-CC
LEC-TP
LEC-JB
LEC-SS
LEC-D2-AF
LEC-BL-DBL
LEC-BL LEC-D1 LEC-D2
LEC-??
LEC-??
LEC-??
Cable clips - Not included
LEC-CC
LEC-??
LEC-??-CC
LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM
LEC-PM4 LEC-PM4R LEC-PM4-FM LEC-PM4R-FM
OHM-2P-0D
OHM-2P-4D
code LEC – PM2 code LEC – PM2R code LEC – PM2 – FM code LEC – PM2R – FM
code LEC – PM4 code
LEC – PM4R code LEC – PM4 – FM code LEC – PM4R – FM
Please see Lettric softwiring catalogue for a comprehensive list of products
Please see Lettric softwiring catalogue for a comprehensive list of products
Please see Lettric softwiring catalogue for a comprehensive list of products

Product specifications
General/height adjustable/cable reticulation/finishes/worktops/sustainable/warranty and guarantee
Agile Tables are a highly refined table system manufactured in Australia by
Schiavello.
Cable reticulation
The system includes concealed cabling fed up through the bases and along a cable
tray to either the 50mm or 100mm wide cable management slots.
Finish
All aluminium is powder coated to Australian Standard AS 3715 – 2002 in a range
of standard or custom colours.
All metal components are powder coated to Australian standard AS4506 2005 in a
range of standard or custom colours.
Worktops
33 mm thick with square, sharknose or bumper edges. Available finishes include
selected laminates, timber veneers and powder coated MDF in a range of standard
or custom colours.
Custom edge profiles and finishes are also available upon request, offering vast
design possibilities.
Sustainable
Agile Tables are manufactured in accordance with international environmental
standards: ISO 14001. All components are either reusable or recyclable.
Warranty and guarantee
Agile Tables are covered by a minimum five year warranty against faulty materials
and workmanship. This includes a guarantee to all standard parts, components and
service for a period of no less than 10 years from date of installation.

Melbourne Head Office
Schiavello [Vic] Pty Ltd
1 Sharps Road
Tullamarine VIC Australia 3043
T: 61] 3 9330 8888
F: 61] 3 9330 8899
Melbourne Showroom
Schiavello [Vic] Pty Ltd
31 – 49 Queensbridge Street
Southbank VIC Australia 3006
T: 61] 3 9674 1500
F: 61] 3 9764 1650
Sydney
Schiavello [NSW] Pty Ltd
69 Campbell Street
Surry Hills NSW Australia 2010
T: 02] 9211 3311
F: 02] 9212 3788
Brisbane
Schiavello [QLD] Pty Ltd
265 Coronation Drive
Milton QLD Australia 4064
T: 07] 3368 3388
F: 07] 3368 2125
Perth
Schiavello [WA] Pty Ltd
1315 Hay Street
West Perth WA Australia 6005
T: 08] 9322 6555
F: 08] 9322 1337
Adelaide
Schiavello [SA] Pty Ltd
Ground Floor, 101 Currie Street
Adelaide SA Australia 5000
T: 08] 8112 2300
F: 08] 8231 1419
Canberra
Schiavello [ACT] Pty Ltd
2-6 Collie Street
Fyshwick ACT Australia 2609
T: 02] 6124 0500
F: 02] 6280 4370
Singapore
Schiavello Singapore Pty Ltd
No.1 Magazine road
#01
– 05 Central Mall
Singapore 059567
T: 65] 6533 8011
F: 65] 6533 2811
www.schiavello.com
SCH/TMA01-B
Schiavello International Pty Ltd
reserves the right to change
any or all details without
prior notice. Every effort
has been made to ensure
the information is accurate
at the time of printing.