Agilent Technologies 8648A Installation and operation manual

Part Number 08647-90033
Printed in USA November 2001
Supersedes October 2001
Installation Note
8647A and 8648A/B/C/D Rack Mount Kit

Notice.
The information contained in this document is subject to change without notice.
Agilent Technologies makes no warranty of any kind with regard to this material, including but not limited
to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies
shall notbe liable for errors contained herein or for incidental orconsequentialdamages in connectionwith
the furnishing, performance, or use of this material.
© Copyright Agilent Technologies, Inc. 1994, 2001

Installation Note 08647-90033 3
8647A and 8648A/B/C/D Rack Mount Kit
Purpose
This installation note provides documentation for the following rack mount kits:
CAUTION Electrostatic discharge (ESD) can damage or destroy electronic
components. For further information regarding ESD precautions, see the
paragraph on ESD in the Service Manual for your instrument.
NOTE When installing the Rack Mount Kit, use an approved static-free
workstation to avoid component damage caused by ESD.
Instrument Rack Mount Kit
8647A 08647-61020
8648A/B/C/D 08648-60001 or Option 1CM

4 Installation Note 08647-90033