Agilent Technologies E3101A User manual

Installation Guide
Agilent E3101A/E3102A/E3103A Option 020
Agilent E3155E Rack Mount Kit for 17-inch Monitor
Agilent E3155G Rack Mount Kit for 17-inch Monitor
Edition 3
Agilent Part Number: E3155-90030
March 2001
Printed in Japan
© Copyright 1999 - 2001 Agilent Technologies, Inc.

2
17-inch Monitor Rack Mount Kit Installation Guide
Notice
The information contained in this document is subject to change without notice. Agilent
Technologies makes no warranty of any kind with regard to this material, including, but
not limited to, the implied warranties of merchantability and fitness for a particular
purpose. Agilent Technologies shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance, or
use of this material.
Warranty
A copy of the specific warranty terms applicable to your Agilent Technologies product
and replacement parts can be obtained from your local Sales and Service Office.
Audience
This manual is intended for the Agilent customer engineer (CE) who install the rack
mount kit or option.
Printing History
The printing date and manual part number indicate its current edition. The printing date
changes when a new edition is printed. (Minor corrections and updates which are
incorporated at reprint do not cause the date to change.) The manual part number changes
when extensive technical changes are incorporated.
Edition 1 December 1999
Edition 2 October 2000
Edition 3 March 2001

3
17-inch Monitor Rack Mount Kit Installation Guide
1Installing the Rack Mount Kit

4 Chapter 1
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
Introduction
Introduction
Description
The Agilent E3155E supplies those items required to mount the HP D8900A 17-inch color monitor into the system
cabinet of the Agilent 4071A/4072A/4073A parametric testers. The Agilent E3155G supplies those items required
to mount the HP D8906A 17-inch color monitor into the system cabinet. The Agilent E3101A/E3102A/E3103A
option 020 is rack mount option for 17-inch monitor, and supplies those items required to mount 17-inch monitor
into the system cabinet. The contents of option 020 depend on the monitor type of Agilent E3171A/E3172A system
controller.
This document covers what items are included in the option and kit, how to install the 17-inch color monitor, and
how to use the belt to fix the monitor on the support shelf.
Necessary Tools
For installing the E3101A/E3102A/E3103A option 020, E3155E, or E3155G; you require the following tool.
•TorxÒwrench, No. 25
• pozidrive screwdrivers

Chapter 1 5
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
Contents List
Contents List
Table 1-1 and table 1-2 list the contents of each rack mount kit.
Table 1-1 Parts for Mounting HP D8900A
Part Number Description Quantity
2680-0278C Screw 10-32´.5a(to fasten the support rails and front panel)
a. Attached to the system cabinet at the factory before shipment if the option 020 is ordered.
8
2680-0320 Screw 10-32´.75a(to fasten the support shelf and keyboard shelf) 4
8120-1395 Power cord (outside Japan)a1
8120-1625 Power cord, universala1
8120-4753C Power cord (inside Japan)a1
9223-0678 Belta1
E3155-90030 Installation guide 1
E3160-00179 Keyboard shelf 1
E3160-00185 Support shelfa1
E3160-00275 Front panela1
E3160-01264 Support raila2
E3160-65035 Front door, smalla1
Table 1-2 Parts for Mounting HP D8906A
Part Number Description Quantity
2680-0278C Screw 10-32´.5a(to fasten the support rails and front panel)
a. Attached to the system cabinet at the factory before shipment if the option 020 is ordered.
8
2680-0320 Screw 10-32´.75a(to fasten the support shelf and keyboard shelf) 4
8120-1395 Power cord (outside Japan)a1
8120-1625 Power cord, universala1
8120-4753C Power cord (inside Japan)a1
9223-0678 Belta1
E3155-90030 Installation guide 1
E3160-00179 Keyboard shelf 1
E3160-00195 Support shelfa1
E3160-00295 Front panela1
E3160-01264 Support raila2
E3160-65035 Front door, smalla1

6 Chapter 1
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
How to Install Option 020
How to Install Option 020
1. Remove the front panel attached where the 17-inch monitor is installed. To remove the screws securing the
front panel to the cabinet frame, use the torxÒwrench.
2. Remove the support shelf that is placed on the support rail. Place it on the floor.
3. Remove the stand on which the 17-inch monitor is mounted.
4. Put the 17-inch monitor on the support shelf.
5. Secure the monitor with the belt. See “How to Use the Belt”.
6. Lift the support shelf (including the monitor), place on the support rails, and slide into the cabinet.
7. Put the front panel on the cabinet frame and secure it with the screws.
8. Connect the video cable.
9. Connect one end of the power cord to the monitor, connect the other end to one of the outlets on the power
distribution unit (PDU) in the cabinet.
10. Attach the keyboard shelf in front of the support shelf, and secure it with the screws.
11. Put the keyboard and mouse on the keyboard shelf, and connect the cables to the system controller.
Figure 1-1 How to Install Rack Mount Kit
Ratchet
buckle
Support shelf
17-inch monitor
Belt
Support rail
Small front door
Keyboard shelf
Front panel

Chapter 1 7
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
How to Install Agilent E3155E/G
How to Install Agilent E3155E/G
1. Remove the cabinet front door, and install the small front door.
2. Remove the blank panels attached where the 17-inch monitor is installed. To remove the panels, use the torxÒ
wrench.
3. Attach the support rails inside the cabinet and secure them with the screws.
4. Place the support shelf on the floor.
5. Pass the belt through the openings on the support shelf.
6. Remove the stand on which the 17-inch monitor is mounted.
7. Put the 17-inch monitor on the support shelf.
8. Secure the monitor with the belt. See “How to Use the Belt”.
9. Lift the support shelf (including the monitor), place on the support rails, and slide into the cabinet.
10. Put the front panel on the cabinet frame and secure it with the screws.
11. Connect the video cables.
12. Connect one end of the power cord to the monitor, connect the other end to one of the outlets on the power
distribution unit (PDU) in the cabinet.
13. Attach the keyboard shelf in front of the support shelf, and secure it with the screws.
14. Put the keyboard and mouse on the keyboard shelf, and connect the cables to the system controller.

8 Chapter 1
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
How to Use the Belt
How to Use the Belt
To Tighten the Belt
1. Thread the edge of the adjusting side of the belt into
the opening of the reeling axis (A), and pull the
adjusting side to tighten.
2. To tighten the belt, wind it by pushing and pulling
the operating lever in the directions shown (B).
Note that the belt must be wound at least two
turns, but not so it reaches the end.
3. Push the operating lever as far as it will go in the
direction (C).
Reeling Axis
Fixing Side
Adjusting
Side
A
Operating Lever
B
C
Opening Lever

Chapter 1 9
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
How to Use the Belt
To Loosen the Belt
1. Grasp the operating lever, then pull the opening lever
in the direction shown (D). The belt will
automatically loosen when in this position.
2. Clamp the edge of the opening lever on the
opening stopper, and pull the belt.
D
Opening Stopper

10 Chapter 1
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
How to Use the Belt