Agiltron 1550nm User manual

Information contained herein is deemed to be reliable and accurate as of the issue date. Photonwares reserves the right to change the design or specifications at any time without notice.

Agiltron is a registered trademark of Photonwares Corporation in the U.S. and other countries.

Parameters Min Typical Max Unit

Operation Wavelength

1055 1060 1072 nm

Operation Mode

Output Power

0.2 10 W

Bam Quality

1.1 1.2 1.3 M2

Spectral Linewidth

2 2 ns

Polarization Extinction Ratio

18 26 35 dB

Output Power Adjust Range

10 100 %

Modulation Range

010 KHz

Output Power Stability (within 48

hr)±2±5%

Operating Temperature

-5 35 oC

Storage Temperature

-40 85 oC

Electrical Power Consumption

150 W

Power Input

110 120 VAC

Computer Interface

USB

Package Dimension

High Power Single Mode 1550nm Laser

(Up to 10W SM or 5W PM, Benchtop)

⚫Lab

⚫OEM

⚫Sensor

⚫Instrumentation

⚫Low Cost

⚫High Reliability

⚫High Power

⚫Single Mode

⚫USB

⚫Turn-Key Benchtop

The HPSL High Power Single Mode Laser is a user-friendly benchtop unit

that delivers up to 10W single mode and 5W polarization Maintain stable

laser output at 1550nm. The output is in constant power (CW). The

spectral width can be selected as broadband, 10nm, and 0.03nm. The

output is a fiber as standard and high power connector or collimator are

options. It has a front power control knob and USB computer interface.

An emission switch adds safety.

Specifications

Applications

Features

Rev 03/12/23

Information contained herein is deemed to be reliable and accurate as of the issue date. Photonwares reserves the right to change the design or specifications at any time without notice.

Agiltron is a registered trademark of Photonwares Corporation in the U.S. and other countries.

Operation Manual

*Product dimensions may change without notice. This is sometimes required for non-standard specifications.

Mechanical Dimension

⚫Plug AC power

⚫Turn ON The Power Switch

⚫Adjust The Output Power to Minimum by Turning The Knob All Way Counter Clockwise

⚫Turn On The Emission Switch

⚫Increase The Out Put Power by Turning The Knob Clockwise

⚫To Modulator The Laser, Turn On The Modulation Switch at the Back, Input a 0-5V Modulation Signal

Via The BNC Connector

⚫The Laser Can Also Be Controlled By a Computer via The USB/GUI Interface

High Power Single Mode 1550nm Laser

(Up to 10W SM or 5W PM, Benchtop)

Information contained herein is deemed to be reliable and accurate as of the issue date. Photonwares reserves the right to change the design or specifications at any time without notice.

Agiltron is a registered trademark of Photonwares Corporation in the U.S. and other countries.

Typical Spectrum

Ordering Information

□ □ □ □ □ □ □ □ 1

Prefix

Wavelength

Output Power

Mode [1]

Spectral Width

Power Supply Interface Output [2]

HPSL-

1550nm = 5

10W = 10

Random = 1

Broad = 1

120

-220V = 1

USB = 1

Bare Fiber=1

5W = 05

PMER18dB = 2

4nm = 2

RS232 = 2

FC/PC=2

2W = 03

PMER25dB = 3

0.04nm = 3

HighPower

FC/PC=2

1W = 01

PMER30dB = 4

Special = 0

Special=0

Special = 00

[1] PMER- Polarization Maintaining Extinction Ratio

[2] Regular FC/PC is temporary that will burn. High-Power FC/PC must mate with the same High-Power FC/PC (we make patch cable)

Red is Special Order

0.05

0.1

0.15

0.2

0.25

0.3

0.35

1540 1550 1560 1570 1580

Output Spectrum (mW)

Wavelength (nm)

3dB bandwidth: 4nm

1548.8 1549 1549.2 1549.4 1549.6 1549.8 1550 1550.2

Output Spectrum (mW)

Wavelength (nm)

3dB Bandwidth: 0.032nm

High Power Single Mode 1550nm Laser

(Up to 10W SM or 5W PM, Benchtop)

Information contained herein is deemed to be reliable and accurate as of the issue date. Photonwares reserves the right to change the design or specifications at any time without notice.

Agiltron is a registered trademark of Photonwares Corporation in the U.S. and other countries.

USB Command List

Laser Safety

This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser

product. This device has been classified with the FDA/CDRH under accession number 0220191. All versions of this laser are

Class 1M laser products, tested according to IEC 60825-1:2007 /EN 60825-1:2007. An additional warning for Class 1M laser

products. For diverging beams, this warning shall state that viewing the laser output with certain optical instruments (for

example eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. For collimated

beams, this warning shall state that viewing the laser output with certain instruments designed for use at a distance (for

example telescopes and binoculars) may pose an eye hazard.

Wavelength = 1.3/1.5 μm.

Maximum power = 30 mW.

*Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

*IEC is a registered trademark of the International Electrotechnical Commission.

INVISIBLE LASER RADIATION

AVOID DIRECT EXPOSURE TO

BEAM

Wavelength: 1.5 µm Max.

Output: 50 mW Class 1M

Laser Product

INVISIBLE LASER RADIATION IS

EMITTED FROM THE END OF FIBER

OR CONNECTOR

Avoid direct exposure to beam Do

not view beam directly with

optical instruments

INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR

CLASS 1M LASER PRODUCT IEC 60825-1:2007 EN 60825-1:2007 MAX

OUTPUT: 50 mW WAVELENGTH: 1.5 µm (+ 1460 to 1620 nm)

Complies with 21 CRF 1040.1 0 and 1040.11 ex cept for deviations pursuant to

Lase r No tice No. 50, dated June 24, 2007 G8760-073-001 REV.3

High Power Single Mode 1550nm Laser

(Up to 10W SM or 5W PM, Benchtop)

Information contained herein is deemed to be reliable and accurate as of the issue date. Photonwares reserves the right to change the design or specifications at any time without notice.