AgriMetal TB-230 User manual

PULL-TYPE TURBINE
LEAF BLOWER
MODEL TB-230
OPERATOR'S MANUAL

WARRANTY VOID IF NOT REGISTERED
AGRIMETAL INC.
PULL-TYPE LEAF BLOWER
WARRANTY
AgriMetal Incorporated (AgriMetal) warrants the new Pull-Type Leaf Blower to be free from de-
fects in material, under normal use and service. Obligation under this warranty shall extend for a
period of 1 year (12 months) following the date of delivery to the original purchaser and shall be
limited to, at the option of AgriMetal, replacement or repair of any parts found, upon inspection by
AgriMetal, to be defective.
WARRANTY CLAIMS
The purchaser claiming under this warranty shall submit a warranty claim in the prescribed form
to AgriMetal or an Authorized Dealer, for inspection by an authorized company representative.
LIMITATIONS OF LIABILITY
This warranty is expressly in lieu of all other warranties expressed or implied and all other obliga-
tions or liabilities on our part of any kind or character, including liabilities for alleged representations
or negligence. We neither assume nor authorize any other person to assume on our behalf, any
liability in connection with the subsequent sale of the Pull-Type Leaf Blower.
This warranty shall not apply to any Pull-Type Leaf Blower which has been altered outside the
factory in any way so as, in the judgement of AgriMetal, to affect its operation or reliability, or which
has been subject to misuse, neglect or accident.
This warranty does not cover parts and accessories which are under separate guarantees from
the manufacturers and where service can be obtained from their service facilities. No warranty is
extended to regular service items such as lubricants, belts, paint and the like.
OPERATOR'S MANUAL
The Purchaser acknowledges having received training in the safe operation of the Pull-Type Leaf
Blower and further acknowledges that AgriMetal does not assume any liability resulting from the
operation of the Pull-Type Leaf Blower in any manner other than described in the Operator's
Manual supplied at the time of purchase.

AGRIMETAL
PULL-TYPE LEAF BLOWER
WARRANTY REGISTRATION FORM & INSPECTION REPORT
I have thoroughly instructed the buyer on the above described equipment which review included the Op-
erator’s Manual content, equipment care, adjustments, safe operation and applicable warranty policy.
Date Dealer’s Rep. Signature
Signature
The above equipment and Operator’s Manual have been received by me and I have been thoroughly
instructed as to care, adjustments, safe operation and applicable warranty policy.
Date Owner's Signature
WARRANTY REGISTRATION
This form must be lled out by the dealer and signed by both the dealer and the customer at the time of deliv-
ery.
Customer’s Name Dealer Name
Address Address
City, State/Prov., Code City, State/Prov., Code
Phone Number ( )
Leaf Blower Model
Serial Number
Delivery Date
DEALER INSPECTION REPORT
SAFETY
______ Safety Chain on Hitch
______ All Decals Installed
______ Guards and Shields Installed and Secured
______ Review Operating and Safety Instructions
WHITE YELLOW PINK
AGRIMETAL INC. DEALER CUSTOMER
NC13-50-0080
______ Blower Turns Freely
______ Belt Tension Checked
______ Check Engine Fluid Levels
______ Pulleys Aligned
______ Fasteners Tight
______ Lubricate Machine
______ Check Tire Pressure

SERIAL NUMBER LOCATION
Always give your dealer the serial number of your AgriMetal Pull-Type Leaf Blower when ordering parts
or requesting service or other information.
The serial number plate is located where indicated. Please mark the number in the space provided for
easy reference.
Model Number
Serial Number

TABLE OF CONTENTS
SECTION DESCRIPTION PAGE
1 Introduction ........................................................ 1
2 Safety.................................................................... 2
2.1 General Safety....................................................... 3
2.2 Equipment Safety Guidelines ................................ 4
2.3 Safety Training....................................................... 5
2.4 Safety Signs .......................................................... 5
2.5 Preparation ............................................................ 6
2.6 Operating Safety.................................................... 7
2.7 Transport Safety .................................................... 8
2.8 Storage Safety....................................................... 8
2.9 Refuelling Safety ................................................... 8
2.10 Tire Safety ............................................................. 8
2.11 Maintenance Safety............................................... 9
2.12 Battery Safety ........................................................ 9
2.13 Gas Motor Safety................................................. 10
2.14 Sign-Off Form .......................................................11
3 Safety Sign Locations ....................................... 12
4 Assembling ........................................................ 15
4.1 Machine Assembly............................................... 15
5 Operation............................................................ 21
5.1 To the New Operator or Owner............................ 21
5.2 Machine Components.......................................... 22
5.3 Break-In ............................................................... 23
5.4 Pre-Operation Checklist ...................................... 23
5.5 Controls ............................................................... 24
5.6 Attaching/Unhooking ........................................... 26
5.7 Field Operation .................................................... 28
5.8 Transporting......................................................... 33
5.9 Storage ................................................................ 34
6 Service and Maintenance.................................. 35
6.1 Service................................................................. 35
6.1.1 Fluids and Lubricants ........................................................... 35
6.1.2 Servicing Intervals................................................................ 36
6.1.3 Service Record..................................................................... 38
6.2 Maintenance ........................................................ 39
6.2.1 Cleaning Air Cleaner ............................................................ 39
6.2.2 Changing Engine Oil and Filter ............................................ 40
6.2.3 Changing In Line Oil Filter.................................................... 41
7 Trouble Shooting ............................................... 42
8 Specications .................................................... 43
8.1 Mechanical .......................................................... 44
8.2 Bolt Torque........................................................... 44
9 Part List .............................................................. 45
10 Index ................................................................... 52

PRINTED IN CANADA
ISSUE DATE: JANUARY , 2011 PART NUMBER: 33-98-0521
AGRIMETAL INC.
1006 PRINCIPALE
WICKHAM, QUEBEC
CANADA, J0C 1S0
TEL: [phone]
FAX: [phone]