AHB Home Furniture Series User manual

,tiered islands, and counter set ups.
Page1
E S T.1987
，
EASTON DUA L HEIGHT S TOOL
03/15/2019

C
A
A
A
A
A
C
Base Frame
Bottom Ring
Upper Ring
J(K)
STEP1 STEP2
STEP3 STEP4
Leg
Base Frame
Leg
FURNITURE COLLECTIONS
HOME
LOOSELY ATTACH SCREW UNTIL FRAME IS ASSEMBLED THEN TIGHTEN WHEN COMPLETE
ASSEMBLY INSTRUCTIONS
E S T.1987
Repeat steps 2 and 3 for the fourth leg as shown
See Page 1 to determine the correct height you wish to assemble
your stool. Insert four short feet (J) for counter height or long feet
(K) for bar height in to the legs and secure by using short allen bolt
(A) as shown
Attach three legs to base frame by using allen bolt (A) as shownshort
Assemble upper ring to legs by using long bolt (C), and
bottom ring legs by using allen bolt (A) as shownto short
Page2
EASTO N DUAL HEIG HT STOOL
03/ 15/20 19

B
E
F
A B CDEFGH
Allen Wrench
5mm
1 PC
Spring Washer
1/4"
8 PCS
Swivel Plate
6"
1 PC
IJ
Short Feet
4 PCS
Long Bolt
1/4"*25mm
4 PCS
Short Bolt
5 16 20
3 PCS
/ "* mm
Flat Washer
1/4"
8 PCS
Allen Wrench
4mm
1 PC
Long Feet
4 PCS
STEP5 STEP6
STEP7 STEP8
Swivel Plate
K
B
E
F
D
Stool Back
Seat Frame
Cushion
Seat Frame
Swivel Plate
Short Allen Bolt
1/4"*12mm
20 PCS
Long Allen Bolt
1/4"*15mm
8 PCS
Attach stool back to the seat frame by using short bolts (D) as shown.
Attach swivel plate to base frame by using long allen bolt (B),
spring washer (E) and flat washer (F) as shown.
Attach swivel plate to seat frame by using allen bolt (B),
spring washer (E) and washer (F)
long
as shown.
Verify all bolts are tight, then turn the stool up right and the
assembly is complete.
Page3
03/ 15/20 19