AHB Romano User manual

,tiered islands, and counter set ups.
ROMANO DUAL HEIGHT STOOL
Page1
E S T.1987
03/15/2019

A
G(H)
STEP1 STEP2
STEP3 STEP4
Leg
A
A
A
A
Attach swivel plate (G) to base frame by using long allen bolt (B),
spring washer (C) and flat washer (D) as shown
Swivel Plate
B
C
D
Attach three legs to base frame and stretcher by using short allen bolt (A)
as shown
Attach the fourth leg to base frame and stretcher by using
short allen bolt (A) as shown
Stretcher
Stretcher
Base Frame
Base Frame
Leg
Base Frame
FURNITURE COLLECTIONS HOME
LOOSELY ATTACH SCREW UNTIL FRAME IS ASSEMBLED THEN TIGHTEN WHEN COMPLETE
ASSEMBLY INSTRUCTIONS
E S T.1987
See Page 1 to determine the correct height you wish to assemble
your stool. Insert four short feet (G) for counter height or long feet
(H) for bar height in to the legs and secure by using short allen bolt
(A) as shown
Page2
ROMAN O DUAL HE IGHT S TO OL
03/15/2019

STEP5 STEP6
Seat Frame
Swivel Plate
A B CDEFGH
Spring Washer
1/4"
8 PCS
Swivel Plate
6"
1 PC
Flat Washer
1/4"
8 PCS
Allen Wrench
4mm
1 PC
Short Allen Bolt
1/4"*10mm
20 PCS
Long Allen Bolt
1/4"*15mm
8 PCS
Short Feet
4 PCS
Long Feet
4 PCS
B
C
D
Attach swivel plate (G) to seat frame by using long allen bolt (B),
spring washer (C) and flat washer (D) as shown
Verify all bolts are tight, then turn the stool up right and the
assembly is complete
Page3
03/ 15/2 019