Ahlborn ALMEMO 470 User manual

For further key functions and information, see Instruction Manual ALMEMO® Wireless Sensor 470 Wireless Datalogger.
Legende
5 Sec
_ Key
_ Hold period
LEDs
o󰀨
LEDs
light up
LEDs are
ashing
Time
sequence
ALMEMO® 470 Wireless Sensor
LEDs
ash rarely
Quick guide
ALMEMO® 470 Wireless Sensor
English
V2.0
2020/08/25
Overview Menu Wireless Sensor www.ahlborn.com
g/kg
°C
%rF
%rF
°C
g/m3
g/kg
dt
kJ/kg
mbar
mbar
K
%H
mbar
°C
%rF
K
°C
g/m3
g/kg
dt
kJ/kg
K
mbar
K
%H
mbar
°C
%H
%rF
mbar
K
mbar
°C
K
°C
°C
g/m3
g/kg
dt
°C
mbar
mbar
kJ/kg
%H
%H

For further key functions and information, see Instruction Manual ALMEMO® Wireless Sensor 470 Wireless Datalogger.
Legende
5 Sec
_ Key
_ Hold period
LEDs
o󰀨
LEDs
light up
LEDs are
ashing
Time
sequence
ALMEMO® 470 Wireless Sensor
LEDs
ash rarely
You will nd the present and further
Instruction Manuals,
as well as the ALMEMO® Manual on
www.ahlborn.com under the tab
SERVICE on DOWNLOADS.
Despite greatest diligence, the possibility of
incorrect information cannot be excluded.
Subject to technical modications without
prior notice.
© Ahlborn Mess- und Regelungstechnik GmbH 2020
Ahlborn Mess- und Regelungstechnik GmbH,
Eichenfeldstraße 1,
D-83607 Holzkirchen, Germany
Tel. / Phone [phone],
Fax [phone]
Internet: http://www.ahlborn.com,
Email: [email protected]
PLEASE KEEP THIS SHORT INSTRUCTION
MANUAL FOR FURTHER REFERENCE
Charge the Wireless Sensor
Plug the micro USB connector of the mains adap-
ter into the micro USB port on the underside of the
wireless sensor, and put the mains plug into a
power socket.
Switch on the Wireless Sensor
Press and hold the button for 5 seconds.
Pair Wireless Sensors
! In the data logger, the serial number of the
wireless sensor must be entered as pairing key in
the menu Settings > Wireless network > Sensor
paining.
Press and hold the key F for 5 seconds.
Transfer Measurement Data
When the sensor is connected, the measurement data will
be transferred according to the output cycle.
Query Battery Charge Level
Press briey the button .
Detect low Battery Charge Level
When the battery charge level
is low, the red LED will light
continuously. Please charge
the wireless sensor.
Switch o󰀨 the Wireless Sensor
Press and hold the button for 5 seconds.
5 Sec
Green LED
is ashing
Green LED
lights up.
All LEDs are
lighting up.
All LEDs
are ashing
simultanously.
Blue LED
is ashing.
Blue LED
lights up.
Blue LED
is ashing
Blue LED
lights up
Blue LED
lights up
briey
All LEDs
light up
Blue and red
LEDs
light up
Red LED
lights up
Red LED is
ashing
80-100% 40-80% 20-40% 0-20%
Red LED
lights up.
5 Sec
All LEDs
light up
No LED
lights
Recognize Sleepmode
The sleepmode has to be activated in the
datalogger.
In the power saving mode the blue and the
green LEDs light up once every 10 seconds.
5 Sec