AICOOK HY-1118B User manual

Shenzhen Impression E-commerce Co.,Ltd
Booth No.3H012, Trading Plaz, No.5,Huanan city,
Pinghu Street, Longgang District,Shenzhen,China
Facebook Page: https://www.facebook.com/Aicook-144643912909738/
Website: www.aicook.cc
HOUSEHOLD USE ONLY
MODEL
HY-1118B
READ THIS MANUAL THOROUGHLY
BEFORE USING AND SAVE IT FOR FUTURE REFERENCE
BLENDER
INSTRUCTION MANUAL
48
40
32
24
16
OZS
6
5
4
3
2
CUPS
81

IMPORTANT SAFEGUARDS
Measuring cap
Lid
Jug
Stainless steel blade
Housing
Buttons
Safe Switch
When using electrical appliance, basic safety precautions
should always be followed including the following
1. Read all instructions carefully.
2. To avoid risk of electrical shock do not put housing in water or
other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Make sure appliance is in “O” bottom and unplug from outlet when
not in use and before putting on or taking off parts.
5. Avoid to contact the moving parts.
6. Do not operate any appliance with a damaged cord or plug.
7. Do not use any appliance damaged in any manner. Return the
appliance to the nearest authorized service facility for examination
and repair.
8. The use of accessories not recommended or sold by the manufac-
turer may cause fire, electrical shock or injury.
9. Do not use appliance outdoors.
10. Do not let cord hung over edge of table or counter.
11. Do not let cord contact hot surface, including the stove.
12. Keep hands and utensils out of container to reduce the risk of
severe injury to people when blender is working. A scraper may be
used only when the blender is not running.
13. Blades are sharp, please handle carefully.
14. Do not blend hot liquids.
15. Do not operate without this cover in place.
16. Do not use the blender with empty blending unit (i.e. without solid
or liquid foodstuff)
17. Do not operate the blender more than 180 second with any
overload.
18. If the supply cord is damaged, it must be replaced by the manu-
facturer or its service agents to avoid a hazard.
SAVE THESE INSTRUCTIONS
48
40
32
24
16
OZS
6
5
4
3
2
CUPS
81
1
2
3
4
6
7
5
LOCK
OPEN
LOCK
OPEN
1 2

BUTTONS SETTING
CLEANING
•“Power” button flashes red when ready to operate
•“Stop” will cease operation
•“Low”, “Med”, “High” speed selections
•“Pulse” for precise blending control
•Pro-Programmed “Frozen Drinks” setting – runs on medium speed
•Pro-Programmed “Ice Crush” setting – Pulses on high speed
1. Remove the mains plug from the wall socket. Do not immerse the
motor housing in water. You can clean the motor housing with a
humid cloth. Do not use abrasive cleaning materials.
2. Disassemble the other parts after each use and wash them in
soapy water. Then rinse with clean water and dry thoroughly. Do not
wash these parts in a dishwasher.
3. Cleaning is the easiest when done immediately after use, or empty
the jug and fill it with water. Turn the switch several times into the
“pulse” setting
3