ECU Bridge
User Manual
Release 1.08
www.aim-sportline.com 2
Index
Chapter 1 – ECU Bridge: kit, expansions and part numbers.........................................3
1.1 – Kit and part numbers............................................................................................................................ 3
1.2 – ECU Bridge available expansions and related part numbers.............................................................. 4
Chapter 2 – Installation, power and connections ...........................................................5
2.1 – How to power ECU Bridge................................................................................................................... 5
2.1.1 – Cable labelled GND...................................................................................................................... 5
2.2 – How to connect ECU Bridge. ............................................................................................................... 6
2.2.1 – Connection with AIM devices and with the PC............................................................................. 6
2.2.2 – Connection of CAN/K Line ECU Bridge to the OBDII plug........................................................... 9
2.2.3 – Connection of RS232/CAN ECU Bridge to the ECU .................................................................. 10
Chapter 3 – Driver, configuration, sampled data visualisation, engaged gear
computation and maintenance.......................................................................................11
3.1 – Visualising data sampled by ECU Bridge on SmartyCam video........................................................ 12
3.2 – Gear computation procedure ............................................................................................................. 12
3.2.1 – Preliminary Information............................................................................................................... 13
3.2.2 – Activating the procedure............................................................................................................. 13
3.2.3 – Learning lap................................................................................................................................ 14
3.2.4 – Erasing gear calibration.............................................................................................................. 14
3.3 – Configuring the displays..................................................................................................................... 14
3.4 – Maintenance....................................................................................................................................... 14
Appendix – Technical drawings .....................................................................................15
