AiP AOC-162 User manual

AOC-162
User's Manual

AOC-162 User's Manual (OM120000036A)
Notes:
1. Reproduction of the contents of this manual in part or in whole without the permission of the
copyright holder is prohibited.
2. Contents of this manual are subject to change without notice.
3. We made assurance doubly sure on the contents of this manual. However, if you find something
questionable, incorrect, or omitted, please contact the shop of purchase.
4. Please note that AVAL DATA assumes no responsibility for any effects resulting from the application
notwithstanding the article 3 above.
Copyright 2012 AVALDATA CORPORATION
Manufacturer names and product names used in this manual are trademarks or registered trademarks
of each company.

AOC-162 User's Manual (OM120000036A)
Before Reading User's Manual
Following symbols and signal words are used in this manual to ensure that our customer can use
this product safely and to prevent the harm to persons or property. Fully understand the
meanings of these symbols before reading the body of the manual.
WARNING:
Indicates a potentially hazardous situation that can result in death or serious injury if you do not
follow instructions.
CAUTION:
Indicates a potentially hazardous situation that can result in minor/moderate injury or
property damage if you do not follow instructions.
Indicates a potentially hazardous situation that can result in electric shock if you
do not follow the instruction.
Indicates a potentially hazardous situation that can result in injury if you do not
follow the instruction.
Indicates a potentially hazardous situation that can result in heat-induced
disorder if you do not follow the instruction.
Instructs the operator to pull out the plug of power cable without fail for safety.
Indicates a potentially hazardous situation that can result in smoking or fire if you
do not follow the instruction.

AOC-162 User's Manual (OM120000036A)
CAUTION:
◆Do not use this product in a watery or humid place. Otherwise it can cause electric
shock.
◆ Do not hold the plug of equipment’s power cord with wet hand when connecting it to AC
outlet. Otherwise it can cause electric shock.
◆Do not touch this equipment with wet hand when power cord is connected to AC outlet.
Otherwise it can cause electric shock and damage to the equipment.
◆Pull out the plug of power cord from AC outlet before installing/removing peripheral
device. Installing/removing peripheral device with power cord connected to AC outlet can
cause electric shock.
◆Connect the plug of equipment’s power cord to an independent AC outlet with a ground
terminal. No connection or loose connection of ground can cause electric shock or
malfunction. Many loads on one AC outlet can cause the outlet to overheat and result
in fire.
◆In the case of failure or abnormality, stop the use immediately and let us know at the
specified contact address.
◆Never repair or modify the product by yourself.

AOC-162 User's Manual (OM120000036A)
Table Of Contents
Chapter1 Precautions ..................................................................... 1
1.1 Handling of the Product ............................................................. 1
1.1.1 Place to use or store the product...................................................... 1
1.1.2 Cautions for use of product .......................................................... 2
1.2 After-Sales Service ................................................................. 2
1.2.1 User's registration .................................................................. 2
1.2.2 Customer Support .................................................................. 3
1.2.3 User’s manual...................................................................... 3
1.2.4 Serial number ...................................................................... 4
1.2.5 Dealing with occurrence of failure or abnormality........................................ 5
1.2.6 Before connect us .................................................................. 5
1.2.7 Repair and maintenance service ...................................................... 5
1.2.8 In the case of transferring the product to a third party .................................... 6
1.3 Disposal Method of the Product ...................................................... 6
Chapter2 General Description .............................................................. 7
2.1 Product Summary .................................................................. 7
2.2 Features .......................................................................... 7
2.3 Specifications...................................................................... 8
2.4 Block Diagram ..................................................................... 9
2.5 Case outline view ................................................................. 10
2.6 Connector pin configuration......................................................... 11
2.6.1 Optical Connector (OPT OUT 1、OPT OUT 2)......................................... 11
2.6.2 Camera Link Connector(CL IN1、CL IN2)............................................. 12
2.6.3 PowerConnector(DC IN)............................................................ 14
Chapter3 Settings and Interface ........................................................... 15
3.1 Hardware initial setting............................................................. 15
3.1.1 CH1_PoCL、CH2_PoCL Setup ..................................................... 15
3.1.2 Attachment of a case / removal ...................................................... 16
3.1.3 Connection of the optical cable ...................................................... 18
3.1.4 Connection of the CameraLink Cable................................................. 19
3.1.5 Connection of the power supply cable ................................................ 20
Chapter4 Function ....................................................................... 21
4.1 CameraLink→Opt-C:Link........................................................... 21
4.2 External Trigger ................................................................... 21

AOC-162 User's Manual (OM120000036A)
4.3 Image capture limit ................................................................22
4.4 Power over Camera Link (PoCL) .................................................... 22
Revision History ............................................................................ 23
Inquiry ..................................................................................... 24

Chapter1 Precautions
Thank you for purchasing「AOC-162」
Please read this user's manual thoroughly to ensure the proper use of this product.
1.1 Handling of the Product
1.1.1 Place to use or store the product
■Do not use this product at a place where it can be subject to spillage of chemicals etc.
Spilled chemical on this product can cause short-circuit and result in fire, failure
or deformation.
■Do not use or store the product in a place where it can subject to spillage of liquids such as
water and oil, a place exposed to steam, or a place of high humidity. Otherwise it can cause
failure of the product.
■Use or store the product in a flat place with sufficient strength. Do not apply vibration or
impact on the product
■Do not use or store the product in a place exposed to direct sunlight or a place close to fire
or heaters such as stoves. Otherwise, it can cause failure or deformation.
■Do not use or store the product in a dusty place.
■Do not use the product at a place close to TV, radio or cordless phone. Otherwise, TV, radio
or cordless phone can sound noise.
■Do not use or store the product at a place close to the equipment generating magnetism or
electric wave. Otherwise, it can cause failure of the module.
■Do not put heavy goods on the product. Otherwise it can cause failure of the module.
■Do not pour liquid such as water in the product. Otherwise it can cause electric shock.
■Static electricity can cause failure of the product. Take sufficient preventive measure
against static electricity such as discharging static electricity of human body when handling
the module.
■Be careful not to get your hand injured by the front or rear surface of the module when
handling the product.
- 1 -

AOC-162 User's Manual (OM120000036A)
1.1.2 Cautions for use of product
Cautions
Be sure to unplug the power code and turn off the power of the system before installing o
r
removing this product. Otherwise it can cause electric shock.
■Precautions for installing procedure of the product
a) Check the switch on the product is set correctly
b) After confirming the installation of the product in the system, turn on the power of
the system and check the operation
■Precautions for removing procedure of the product
a) Be sure to turn OFF the power of the system before removing the product,
Otherwise it can cause failure
b) Right after turn OFF the power of the system, the product may be heated to
a high temperature. please handle it with care.
* Refer to the manual for the use of the system
1.2 After-Sales Service
1.2.1 User's registration
User's registration is required to use the after sales service.
Otherwise, you may not obtain the maintenance service from AVAL DATA.
Select one of the following methods for registration.
Registration on the Website :
A maintenance service registration page is in the support homepage of our homepage.
A page for maintenance service registration in the support page on AVAL DATA’s homepage.
http://www.avaldata.co.jp/support/regist_user.html
Registration by FAX :
Fill out a FAX registration form for maintenance service that is included with shipment.
FAX: [phone].
AVALDATA handles personal information appropriately and safely.
The handling of privacy policy is on the Website below:
http://www.avaldata.co.jp/policy/privacy.html
- 2 -

AOC-162 User's Manual (OM120000036A)
- 3 -
1.2.2 Customer Support
For the products inquiries, please contact to the support line below.
Customer service
AVAL DATA CORPORATION (URL http://www.avaldata.co.jp/)
Head Quarters / Machida OFFICE SALES DEPARTMENT
1-25-10, Asahimachi, Machida-shi, Tokyo
TEL [phone]
FAX [phone]
Business hours ：Monday-Friday 9:00AM-17：00PM(except for a national holiday)
E-mail [email protected]
For the Technical inquiries, please contact to the support line below.
Technical support Line
E-mail [email protected]
1.2.3 User’s manual
A printed manual is not included with the shipment. The manual is provided for download on the
website.
It is based on concepts of environmental consideration and providing continuous updates in
the ever-changing industry.
AVAL DATA appreciate your understanding.
Download from the Website.
* Membership registration is required.
http://www.avaldata.co.jp/support/manual.html
In addition, request a Support Line when it is difficult to download of the manual from the Website. AVAL
DATA will send you it in electronic media, such as CD-R.
(The customer is responsible for the shipping cost of the items.)

AOC-162 User's Manual (OM120000036A)
1.2.4 Serial number
The serial number of the product is printed on the label on the main unit(case and substrate), the warranty
certificate, the box, given each.
Location of the serial number label of the product is shown below.
serial number
Figure1-2-4 Location of the serial number label
- 4 -

AOC-162 User's Manual (OM120000036A)
- 5 -
1.2.5 Dealing with occurrence of failure or abnormality
When the following failure or abnormality occurred on the module, turn off the power of the system
immediately and pull out the plug of power cord from AC outlet.
A) When the system smokes or gives abnormal smell
B) When the system becomes too hot to touch by hand
C) When the system sounds abnormal noise
D) When the application that had been functioning correctly malfunctions
Contact to the company of purchase or customer service when failure or abnormality occurred.
1.2.6 Before connect us
Check the followings in advance when consulting with us for the failure or abnormality of the product
A) Check the following in advance when consulting with us for the failure or abnormality of the product
B) Have the Warranty certificate of the module at hand
C) Prepare a simple note on the state of failure or abnormality.
D) Prepare a note on the environment where the module is used (Hardware/ Software)
E) Have the manual of the module at hand.
1.2.7 Repair and maintenance service
・Warranty certificate
In case of failure of the product, we will repair the product in accordance with the contents of the
certificate. Refer to the certificate for details.
・Repair parts
The minimum holding period of repair parts is 5 years after discontinuation of the product.

AOC-162 User's Manual (OM120000036A)
- 6 -
1.2.8 In the case of transferring the product to a third party
A) User who transfers the product
Following conditions shall be satisfied when the product is transferred to a third party.
・All attachments to the module (instruction manual, warranty certificate, accessories, etc.)
shall be transferred. No reproduction shall be kept.
・Conditions related to transfer and alienation described in the condition to use that is attached
to each software shall be satisfied.
・The software not permitted for its transfer and alienation shall be deleted before transfer.
B) User to whom the product is transferred
Be sure to inform us of the items necessary for changing the contents of user registration for the
case when we send information to our users.
Items necessary for registration:
Warranty certificate number of the main unit, model name, and serial number.
The name of company you purchased the used product, its address and phone number
1.3 Disposal Method of the Product
Observe the related ordinances of the local government when discarding the module.
Consult with the local government for details.

AOC-162 User's Manual (OM120000036A)
- 7 -
Chapter2 General Description
This chapter describes general description of this product
2.1 Product Summary
This product is an unit for converting Camera Link into Opt-C:Link.
This product has two SFP+ connectors. It can connect with two Base Configuration cameras.
Therefore, it can connect with an Opt-C:Link frame-grabber(APX-3800 etc).
About Opt-C:Link
Opt-C:Link is an original interface standard for connecting camera with frame-grabber by optical fiber.
It can perform image data transmission, trigger control and serial communication through an optical cable.
It can perform data transfer by 6.25Gbps communication speed that is equivalent to Camera Link.
Using optical transmission path enable the system to improve noise immunity and to realize long distance
transmission.
2.2 Features
Features of this product.
・Optical transmission speed is 6.25Gbps per channel.
・The optical channel number is two channels.
・The optical channel operates at each channel independently.
・The optical module is SFP+ and it can be connected with versatile LC cable.
・CameraLink interface consists of two SDR connectors.
・This product has PoCL function.
・This product requires a single voltage input with DC12V.

AOC-162 User's Manual (OM120000036A)
- 8 -
2.3 Specifications
The specifications of this product are described as follows.
Table2-3 specifications
CameraLink I/F CameraLink BaseConfiguration 2ch
Two connector of SDR26pin
Area camera and Line camera correspondence
Opt-C:Link I/F Access Speed
Access Mode
Laser Form
Distance between Max
node
Laser safety standard
Connector Form
Cable specification
: 6.25Gbps
: MultiMode
: 850nm VCSEL
: 150m
: Class 1
: LC connector
: Core diameter 50μm /62.5
μm
: Clad diameter 125μm
The maximum distance
changes with cable
specification
Communications
protocol
Opt-C:Link original protocol
Power Over PoCL Specification
(SafePower not conformity)
Dimension
(substrate)
61mm x 95mm Projection thing not
contains
Dimension
(case)
64.2mm x 99.5mm x 28mm
weight 277g
Environment
Requirements
Temperature：0℃to 50℃
Humidity：35% to 80% (non-condensing)
Storage
Requirements
Temperature：-20℃to 70℃
Humidity：35% to 80% (non-condensing)
Power supply voltage +12V ±8%
Power
Requirements
+12V : 800mA
(When using PoCL, it changes by the cameras
connecting.)
Removes Incoming current
and ripple current
RoHS compliant Yes

AOC-162 User's Manual (OM120000036A)
2.4 Block Diagram
Block Diagram of this product.
SDR(26pin) SDR(26pin)
FPGA
ArriaⅡGX
EP2AGX45
CU17I3N
CameraLink
Receiver
Opt
Module
Opt
Module
CameraLink
Receiver
DC+12V / External
trigger
Figure2-4 block diagram
- 9 -

AOC-162 User's Manual (OM120000036A)
2.5 Case outline view
Case outline view of this product is shown below.
- 10 -
Ch1Ch2
HDR-EC26LFDT1-SLD+（HONDA TSUSHIN KOGYO）
SFP+connector
AFBR-57D7AMZ
Ch2 Ch1
HR10A-10R-12S
（HIROSE ELECTRIC）
（AVAGO Technologies）
Figure2-5 case outline view

AOC-162 User's Manual (OM120000036A)
2.6 Connector pin configuration
Connector of this product is shown below.
2.6.1 Optical Connector (OPT OUT 1、OPT OUT 2)
This is an optical connector for connecting between the equipment of Opt-C:Link.
Connector form is SFP+.
Manufacture：AVAGO Technologies
Model ：AFBR-57D7AMZ
Transmission(Tx) Transmission(Tx)
- 11 -
Reception(Rx) Reception(Rx)
Figure2-6-1 Optical Connector

AOC-162 User's Manual (OM120000036A)
2.6.2 Camera Link Connector(CL IN1、CL IN2)
This is a SDR connector corresponding to Camera Link.
Manufacture：HONDA TSUSHIN KOGYO
Model ：HDR-EC26LFDT1-SLDP
Figure2-6-2 Camera Link Connector
- 12 -

AOC-162 User's Manual (OM120000036A)
- 13 -
Table2-6-2_1 CL IN 1 PinAssign
Pin Signal Pin Signal
1 NC/+12V(PoCL) 14 GND
2 CC4- 15 CC4+
3 CC3+ 16 CC3-
4 CC2- 17 CC2+
5 CC1+ 18 CC1-
6 SerTFG+ 19 SerTFG-
7 SerTC- 20 SerTC+
8 X3+ 21 X3-
9 XCLK+ 22 XCLK-
10 X2+ 23 X2-
11 X1+ 24 X1-
12 X0+ 25 X0-
13 GND 26 NC/+12V(PoCL)
Table2-6-2_2 CL IN 2 PinAssign
Pin Signal Pin Signal
1 NC/+12V(PoCL) 14 GND
2 CC4- 15 CC4+
3 CC3+ 16 CC3-
4 CC2- 17 CC2+
5 CC1+ 18 CC1-
6 SerTFG+ 19 SerTFG-
7 SerTC- 20 SerTC+
8 X3+ 21 X3-
9 XCLK+ 22 XCLK-
10 X2+ 23 X2-
11 X1+ 24 X1-
12 X0+ 25 X0-
13 GND 26 NC/+12V(PoCL)

AOC-162 User's Manual (OM120000036A)
2.6.3 PowerConnector(DC IN)
This is 12pin round shape connector.
Manufacture：HIROSE ELECTRIC
Model ：HR10A-10R-12S
Figure2-6-3 PowerConnector
Table2-6-3 PowerConnector PinAssign
PinNumber Name
1 GND
2 Power Input(DC+12V)
3 NC
4 NC
5 NC
6 External trigger ch1
(Refer to Chapter 4.)
7 External trigger ch2
(Refer to Chapter 4.)
8 NC
9 NC
10 NC
11 NC
12 NC
- 14 -